GHOSTBUSTERS Incense Trap Instructions

GHOSTBUSTERS - logo

GHOSTBUSTERS Incense Trap

WARNING – ONLY BURN ONE INCENSE CONE AT A TIME! Et le OF OVERHEATING IF TOO MUCH INCENSE IS USED! 1. Place the Trap on a flat surface 2. Open the trap using handle 3. Lay the Trap’s door down to gain access to the incense cup 4. Remove the incense cap 5. Light the incense cone 6. BLOW THE FLAME OUT before dropping the incense cone into cup 7. Place the incense cup back into trap 8. Close the lid

INCENSE TRAP 
INSTRUCTIONS

Documents / Resources

PDF thumbnailIncense Trap
Instructions · Incense Trap

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.