Opengear OM1200 Device Server with Gigabi
BEFORE YOU BEGIN
Check that you have the appropriate parts in the box
OM1200
- Appliance
- 12V DC Power Supply
- Rack Mount Screw Kit
- Rack Ears for OM1200
- RJ45 to DB9F Crossover Serial Adapter
- CAT5e RJ45 UTP Straight Cable
- 4G LTE-A Pro Antennas
OM2200
- Appliance
- IEC Power Cables
- Rack Mount Screw Kit
- Rack Ears for OM2200
- RJ45 to DB9F Crossover Serial Adapter
- CAT5e RJ45 UTP Straight Cable
- 4G LTE-A Pro Antennas
Refer to user manuals for part numbers and quantities included.
Check the appliance is labelled as LSP enabled
Register an account / log in to Lighthouse Service Portal
Visit portal.opengear.com.
If not already registered, click the user icon and select Register to initiate the process. Log in to the portal with your credentials.
Configure the enrollment packages
- Navigate to the Lighthouse Service Portal.
- Navigate to the
Dashboard. - Select Manage Packages.
- The Enrollment Settings are displayed.
- Select New Enrollment Package.
- Setup and configure the Enrollment Packages.
Refer to the Lighthouse Service Portal online documentation for more information regarding the configuration of enrollment packages.
Configure appliance enrollment options
- To enable true zero touch provisioning, navigate to the Lighthouse Service Portal.
- Navigate to the Dashboard.
- Select Manage Packages.
- Set Automatic Enrollment Triggering to Active.
- Set Default Enrollment Package to Active.
Select Default Enrollment Package.
Note that by default these settings are set to inactive.
LET’S GET STARTED
Step 1:
Connect the network, insert sim card(s) and power the Opengear appliance.
OM1200
OM2200
Cellular is Enabled in LSP-enabled devices. The sim must be able to connect via the default APN ‘Broadband’ in the event the appliance is unable to connect via the network interface. Digi sim cards support the default APN out of the box.
Step 2:
The appliance initiates the enrollment and provisioning.
Step 3:
Monitor the enrollment and provisioning progress.
Step 4:
The appliance is enrolled and provisioned with the updated status shown. Check the status on either the Lighthouse Instance or Lighthouse Service Portal. 
Further Information
Troubleshooting
OM2200
Additional LED status may be shown during the provisioning and enrollment process.
Support
For online support information such as help desk, user manuals and knowledge base articles, visit portal.opengear.com
Documents / Resources
 |
Opengear OM1200 Device Server with Gigabi [pdf] User Guide OM1200, OM2200, OM1200 Device Server with Gigabi, OM1200, Device Server with Gigabi, Server with Gigabi, with Gigabi, Gigabi |
