NOUS B1T Smart Switch Module With Tasmota

Specifications

• Name: Nous B1T
• Button: A short press switches the device ON/OFF
• Indicator: Shows current device status
• UART: Connectors for device programming

Product Usage Instructions

Precautions

For safety reasons, insert the plug fully into the outlet when in use.

Assembly:

Installation Procedure:

1. Connect the switch as shown in one of the electrical diagrams.
2. Once installation is complete, the device is ready to use.

Importantly: Ensure stable Wi-Fi network with a sufficient level in the chosen location.

Template Activation:

The template and rules are already activated but can be accessed later if needed using the provided template information.

Factory Reset:

To reset the device to factory settings:

1. Plug and unplug the device 6 times and leave it on for the 7th – the LED should start flashing.
2. If web interface access is available, type “reset 1” in the console and press enter.

Smart Home Systems Integration:

To connect the device to smart home systems using the Matter protocol, refer to the provided information link.

FAQs

Q: Can I use the device with a 5 GHz Wi-Fi network?

A: No, the device is designed to work only with 2.4 GHz Wi-Fi networks.

Q: How do I know if the device is successfully connected to Wi-Fi?

A: Upon successful connection, you will see the message “Successfully connected to Wi-Fi” along with the device’s network address.

Q: How do I reset the device to factory settings?

A: Plug and unplug the device 6 times, leaving it on for the 7th time until the LED starts flashing; alternatively, use the web interface and type “reset 1” in the console.

OPERATION MANUAL

NOTE: Tasmota is not a commercial product and support is limited. You must be willing to independently investigate and resolve potential issues. Detailed information on connection, changing settings and modifications is presented on the website ” https://tasmota.github.io/docs/ ”

description

The NOUS B1T smart switch with Tasmota open software installed (hereinafter – the switch) is designed to organize automatic and manual shutdown of electrical appliances in the room, through remote access via a Wi-Fi network, using a smartphone or from a personal computer via Web interface. Communication with the switch is configured via a Wi-Fi network, for which a wireless Wi-Fi adapter is used. The switch is equipped with a mechanical button and a light indicator of the device’s status. The device is equipped with an electromechanical relay and supports the Matter protocol.

ATTENTION: The connection of a smart socket with a Wi-Fi network cannot be guaranteed in all cases, as it depends on many conditions: the quality of the communication channel and intermediate network equipment, the brand and model of the mobile device, the version of the operating system, etc.

PRECAUTIONS

• Read this manual carefully.
• Use the product within the temperature and humidity limits specified in the technical data sheet.
• Do not install the product near heat sources such as radiators, etc.
• Do not allow the device to fall and be subject to mechanical loads.
• Do not use chemically active and abrasive detergents to clean the product. Use a damp flannel cloth for this.
• Do not overload the specified capacity. This may cause short circuit and electric shock.
• Do not disassemble the product yourself – diagnostics and repair of the device must be carried out only in a certified service center.
• Please contact the seller for a replacement if there is damage caused by shipping.
• Please insert the plug into the outlet in proper condition and away from children.
• For safety reasons, insert the plug fully into the outlet when in use.

Design and controls

Assembly

Installation procedure:

Connection

A smartphone or personal PC is required to connect the Nous В1Т switch.

The procedure for connecting the switch to the Wi-Fi network:

Documents / Resources

NOUS B1T Smart Switch Module With Tasmota [pdf] Instruction Manual B1T Smart Switch Module With Tasmota, B1T, Smart Switch Module With Tasmota, Module With Tasmota, With Tasmota, Tasmota

References

• User Manual