NICOR PRCP2EBADAPT1WH Adapter for Prime Chime Plus
Specifications
- Product Name: ecobee Adapter for Prime Chime Plus
- Model: PRCP2EBADAPT1WH
- Manufacturer: NICOR, Inc.
- Required Junction Box: Low voltage side of a dual voltage box (CARLON Model#SC200DV or equivalent, not provided)
What’s In The Box
- One (1) ecobee Adapter
Tools Needed
The ecobee Adapter requires very few tools for installation. A screwdriver and a pair of wire cutters will be required to install the adapter.
Junction Box
The adapter is required to be installed on the low-voltage side of a dual-voltage box (CARLON Model#SC200DV or equivalent, not provided)
Installation
Preparation
- Shut off the power to the desired circuit before any work. Identify and prepare the location for installation.
- Carefully unpack the fixture from its packaging and inspect the product for defects due to shipping.
- If installed, remove the PRCP2/A from its junction box. If not yet installed, move to Step 2.
Mounting
- Mount the ecobee unit to the side wall of the low-voltage section of the junction box using double-sided tape.
- Mount the NICOR adapter to the ecobee unit using double-sided tape.
Wiring
- Connect the PRCP2/A, ecobee unit, and NICOR adapter per the wiring diagram.
FAQs
Q: What tools are required for installing the ecobee Adapter?
A: You will need a screwdriver and a pair of wire cutters for installation.
Q: Where should the ecobee Adapter be installed?
A: The adapter should be installed on the low-voltage side of a dual-voltage box, such as CARLON Model#SC200DV or equivalent.
Documents / Resources
 |
NICOR PRCP2EBADAPT1WH Adapter for Prime Chime Plus [pdf] Installation Guide PRCP2EBADAPT1WH, PRCP2EBADAPT1WH Adapter for Prime Chime Plus, PRCP2EBADAPT1WH, Adapter for Prime Chime Plus, for Prime Chime Plus, Prime Chime Plus, Chime Plus |