NICOR Lighting
Installation Guide for NICOR models including: PRCP2EBADAPT1WH, PRCP2EBADAPT1WH Adapter for Prime Chime Plus, PRCP2EBADAPT1WH, Adapter for Prime Chime Plus, for Prime Chime Plus, Prime Chime Plus, Chime Plus
Mar 24, 2025 · The ecobee Adapter requires very few tools for installation. A screwdriver and a pair of wire cutters will be required to install the adapter.
File Info : application/pdf, 1 Pages, 667.58KB
DocumentDocumentWhat's In The Box One (1) ecobee Adapter ecobee Adapter for Prime Chime Plus INSTALLATION INSTRUCTIONS Model:PRCP2EBADAPT1WH Tools Needed The ecobee Adapter requires very few tools for installation. A screwdriver and a pair of wire cutters will be required to install the adapter. Junction Box The adapter is required to be installed on the low voltage side of a dual voltage box (CARLON Model#SC200DV or equivalent, not provided) Installation 1 Preparation · Shut off power to desired circuit before any work. Identify and prepare location for installation. · Carefully unpack the fixture from its packaging and inspect product for defects due to shipping. · If installed, remove the PRCP2/A from its junction box. If not yet installed, move to Step 2. 2 Mounting · Mount the ecobee unit to the side wall of the low voltage section of the junction box using double-sided tape. · Mount the NICOR adapter to the ecobee unit using double sided tape. 3 Wiring · Connect the PRCP2/A, ecobee unit and NICOR adapter per the wiring diagram. ecobee unit NICOR adaptor ecobee NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com March 24, 2025 11:58 PM PRCP2 Rev 1 Page 1 of 1