NEXTORCH UT41 Multi Function Rechargeable Signal Light User Manual
SPECIFICATIONS
ANSI / PLATO-FL1 | ![]() |
![]() |
|
Constant on | Flash | ||
Red Light | 3 lm | 18 h | 90 h |
Blue Light | 2 lm | 16 h | 86 h |
Yellow Light | 9 lm | 20 h | 113 h |
Green Light | 12 lm | 18 h | 95 h |
White Light | 20 lm | 12 h | 62 h |
IR Light | 850 nm | 13 h | 75 h |
Red & Blue Flash | — | — | 56 h |
![]() |
2 m | ||
![]() |
IPX8,2 m | ||
Weight and Dimensions | Weight: 29 g / 1.02 oz Size: 62 mm (Length) × 27 mm (Width) × 25 mm (Height) | ||
Material | Light Source: White / Red / Blue / Green / Yellow / IR LED sPC | ||
Battery | Built-in 500 mAh Rechargeable Battery |
Above tested specifications are strictly based on the standard of ANSI / PLATO-FL1. We tested UT41 with built-in 500 mAh Li-ion battery in 22 °C ± 3 °C . The specifications might be different when using a different battery or testing in a different environment.
FEATURES
- 6 light sources and 13 modes are able to indicate different grouping, personal Identify Friend or Foe (IFF) beacon, quick positioning and security warning.
- Various Carry Options allow mounted on a MOLLE or helmet with ARC rails for fast, secure installation and easy removal.
- Dual Side Switches for light sources or modes selection, clear operation logic andnon-interference.
- The transparent shell ensures all-round signal recognition and identification.
- USB Type-C rechargeable for convenient charging, environmentally friendly and efficient.
INSTRUCTION
- ON / OFF
Press to turn on, press again for more than 3s to turn off.
- Mode Selection
Press to turn on, press again within 3s to switch Flash→ OFF→ Constant ON (In the red and blue flashing state, only ON/OFF is switched)
- Lights Selection
Press when the light in on
Red → Blue → Yellow → Green → White → IR → Red & Blue Flash
- Light Source Memory
When reactivated, the light will automatically access the previous memorized light source.
- Mounting Method①
ARC Rail Clip
- Mounting Method②
Back Clip
NOTE: If IR light is turned on, please switch to other light sources and then turn it off.
BATTERY INDICATOR
- USB Type-C Rechargeable
Charging time about 2 hours. Red light: charging in progress. Blue light: fully charged
- Battery Capacity Indicator
Battery indicator will light up for 2s only when turn on the light.
NOTE: When the IR light is turned on, the power indicator light will not light up.
Blue light: 75% ~100%
Blue flash: 50% ~75%
Red light: 25% ~50%
Red flash: 0% ~25%
MAINTENANCE
- Being infected with seawater or any corrosive chemicals, please rinse immediately with clean water.
- Please fully charge the battery before first use; if left unused for a long time, recharge every three months.
- The product uses a non-removable built-in battery. Do not replace the battery yourself to avoid damage to the product battery
WARRANTY
- NEXTORCH offers 5-year warranty.
- NEXTORCH warrants our products to be free from any defects in workmanship and / or material, we will replace or return faulty item. NEXTORCH reserves the right to replace similar products if original one is discontinued.
- The warranty excludes other accessories, but rechargeable batteries are warranted for 1 year from date of purchase.
- Any accessories or products are not covered in the warranty, NEXTORCH can repair for users with reasonable fee.
- Please scan the below QR code and access to NEXTORCH website
(www.nextorch.com) to register your purchasing.
Email us info@nextorch.com
Call us: 0086-662-6602777
Or contact local dealer
CONTACT WITH NEXTORCH DESIGNER
In order to improve NEXTORCH , we appreciate you could offer our designers your after-use feedback and creative suggestions by scanning the following QR code. Thank you!
Documents / Resources
![]() |
NEXTORCH UT41 Multi Function Rechargeable Signal Light [pdf] User Manual UT41 Multi Function Rechargeable Signal Light, UT41, Multi Function Rechargeable Signal Light, Function Rechargeable Signal Light, Rechargeable Signal Light, Signal Light, Light |