Setting up Wi-Fi for Nextiva X-815/835/885

The A210 Wi-Fi dongle is required to set up Wi-Fi for the Nextiva X-815/835/885, allowing the device to connect to the internet wirelessly. For best results, make sure your phone is unplugged from the power before setting up the Wi-Fi dongle. 

  1. Plug the A210 Wi-Fi dongle into the USB port on the right side of the phone. Connect the phone to the power adapter and wait for the device to say “sending DHCP requests.”
  2. Press X to skip the message and wait for the device to boot up, then press the SETTINGS key on the phone. Using the navigation pad, select Network under Settings.
  3. Select WLAN and turn on WLAN by switching the toggle to On.
  4. Select Scan WLAN, then choose the desired Wi-Fi network. Enter the Wi-Fi password and press the Confirmation key. Press the Edit Mode softkey to change between lower case and upper case letters and numbers.
  5. Press the Reboot softkey on the bottom left. The phone will reboot and automatically connect to the Wi-Fi network. If the phone doesn’t connect to Wi-Fi, check that the proper Wi-Fi network was chosen and the password was entered correctly.

Nextiva-X-815-Quick-Reference-Guide [PDF]
Nextiva-X-835-Quick-Reference-Guide [PDF]
Nextiva-X-885-Quick-Reference-Guide [PDF]

Ask a question

Your email address will not be published.