Next Level RACING NLR-R005 F-GT PRO Shifter and Handbrake ARM Add On
YOUR SIM RACING JOURNEY STARTS HERE
We know you’re eager to start racing! Take your time with the instructions and follow this guide to assemble your product.
You’ll be setting yourself up for success by following the instruction booklet to fully optimize your product.
ASSEMBLY VIDEO
bit.ly/nlrbuild
@next_level_racing
@nextlevelracingOfficial
@nextiviracing
Next Level Racing
support@nextlevelracing.com
TA K E R ACING
TO THE NEXTLEVEL® NEXTLEVELRACING.COM
PRE-RACE CHECKS
WARNING
- Please do not use power tools for assembly as over tightening can damage your frame.
- If you require further support, consult the installation video or contact us at support@nextlevelracing.com
- Do not force parts together.
- Avoid cross threading bolts.
- Take care when making adjustments while electronics are mounted.
If you require any support with your product please contact our friendly team at:
support@nextlevelracing.com
WARNING CHOKING HAZARD – Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths.
NLR-R005 F-GT PRO SHIFTER & HANDBRAKE ARM ADD-ON NLR-R005 INSTRUCTIONS
Date of Document: October, 2024
Manufactured by:
Next Level Racing Simulations PTY LTD
23 Olympic CCT,Southport, QLD,Australia
Video Instruction: bit.ly/nlrbuild
IN THE BOX
*NOT TO SCALE
NOTE: Some Items Come with Rust Resistant Coating
MOUNTING LOCATIONS
SHIFTER & HANDBRAKE PLATE
ASSEMBLY
LEFT-HAND SHIFTER ASSEMBLY
- A) Align the mounting holes on the Shifter Arm with the inserts on the side of the F-GT Pro cockpit.
- B) Bolt through into inserts and secure using M8 Bolts and Washers.
PARTS:
- 1 x Shifter Arm
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
- A) Align the mounting holes on the Shifter Mount with the desired inserts on the Shifter Arm.
- B) Bolt through into inserts and secure using M8 Bolts and Washers.
PARTS:
- 1 x Shifter Mount
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
- A) Align the mounting holes on the Shifter & Handbrak
- B) Bolt through into inserts and secure using M8 Bolts and Washers.e Plate with the inserts on the Shifter Mount.
PARTS
- 1 x Shifter & Handbrake Plate
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
RIGHT-HAND SHIFTER ASSEMBLY
- A) Align the mounting holes on the Shifter Arm with the inserts on the side of the F-GT Pro cockpit.
- B) Bolt through into inserts and secure using M8 Bolts and Washers.
PARTS
- 1 x Shifter Arm
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
- A) Align the mounting holes on the Shifter Arm with the inserts on the side of the F-GT Pro cockpit.
- B) Bolt through into inserts and secure using M8 Bolts and Washers.
PARTS
- 1 x Shifter Mount
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
- A) Align the mounting holes on the Shifter & Handbrak
- B) Bolt through into inserts and secure using M8 Bolts and Washers.e Plate with the inserts on the Shifter Mount.
PARTS
- 1 x Shifter & Handbrake Plate
- 4 x M8 16mm Button Head Bolts
- 4 x M8 Washers
ADJUSTMENTS
Loosen or remove the Bolts indicated above and change the Shifter & Handbrake Plate Assembly to your desired Height, Angle and Position. Retighten or reinstall the Bolts to lock in place.
PARTS
- NIL
SHIFTER & HANDBRAKE PLATE LEVELING
If Shifter & Handbrake Plate is tilting away from cockpit, loosen all 4 Shifter Arm mounting Bolts, pull upwards on Shifter Arm until Shifter Plate is level. Tighten Shifter Arm mounting Bolts whilst holding upwards tension.
PARTS:
- NIL
WARNING
- Please do not use power tools for assembly as over tightening can damage your frame.
- If you require further support, consult the installation video or contact us at support@nextlevelracing.com
- Do not force parts together.
- Avoid cross threading bolts.
- Take care when making adjustments while electronics are mounted.
ASSISTANCE
If you require further support with your product please contact our friendly team at: support@nextlevelracing.com
Documents / Resources
 |
Next Level RACING NLR-R005 F-GT PRO Shifter and Handbrake ARM Add On [pdf] Instruction Manual NLR-R005, NLR-R005 F-GT PRO Shifter and Handbrake ARM Add On, NLR-R005, F-GT PRO Shifter and Handbrake ARM Add On, Shifter and Handbrake ARM Add On, Handbrake ARM Add On, ARM Add On |