Contents
hide
4IN1CBW10WT | 4IN1CDW10WT CCTV Security Camera
User Manual
Preface
Thank you for purchasing the Nedis 4IN1CBW10WT | 4IN1CDW10WT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis 4IN1CBW10WT | 4IN1CDW10WT is a CCTV security camera.
This 4 in 1 CCTV camera is compatible with both analog and digital DVR systems. Use the controller on the cable to switch between 4 of the most common video formats to easily add the security camera to your DVR system.
Intended use
This product is exclusively intended as a security camera.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
|
Product
|
CCTV Security Camera
|
|
|
Article number
|
4IN1CBW10WT
|
4IN1CDW10WT
|
|
Dimensions (l x w x h)
|
163 x 55 x 55 mm
|
93 x 93 x 66 mm
|
|
Weight
|
162 g
|
|
|
Waterproof
|
IP66
|
No
|
|
IR LED
|
12 pcs SMT LEDs
|
24 pcs LEDs
|
|
Image sensor
|
2.0 Megapixel, CMOS sensor
|
|
|
Lens
|
3.6 mm fixed lens
|
|
|
Minimum illumination
|
0.01 Lux (F1.2, AGC NO), 0 Lux with IR
|
|
|
IR range
|
20 m
|
|
|
Day & night
|
IR CUT
|
|
|
Scanning system
|
PAL
|
|
|
Frame rate
|
PAL: 1920 x 1080 @ 25 fps
|
|
|
Shutter time
|
1/25 s – 1/100.000 s
|
|
|
Operation temperature
|
-10 °C – +50 °C
|
|
|
Power supply
|
12 VDC
|
|
|
Power consumption
|
3 W, 5 W (IR on)
|
|
|
Transmission distance
|
500 m (coaxial video cable)
|
|
Main parts (image A)
 |
|
A
|
|
1. Joystick
|
|
2. BNC connector (female)
|
|
3. 5.5 mm DC connector (female)
|
|
4. Camera head
|
|
5. Orientation indicator
|
|
6. Infrared LEDs
|
|
7. Lens
|
|
8. PIR sensor
|
|
9. Screw (3x)
|
|
10. Plug (3x)
|
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
- Do not open the product.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Disconnect the product from the power outlet and other equipment if problems occur.
- Keep the product out of reach from children.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Preparing the security camera
- To connect the camera, you need a Digital Video Recorder (DVR) that is connected to a monitor.
1. Connect A2 to a DVR with a BNC cable (not included).
2. Connect A3 to a 12 VDC power adapter (not included).
3. Insert the power adapter into a power outlet.
Selecting video format (image B)
- Set up the correct signal before mounting the camera.
1. Choose the desired input signal format to send to the DVR.
2. Tilt and hold A1 for 3 seconds in the desired direction.
3. The security camera is now ready for use.
 |
|
B
|
|
TVI
|
Transport Video Interface
|
Digital format
|
|
AHD
|
Analog High Definition
|
Digital format
|
|
CVI
|
Composite Video Interface
|
Digital format
|
|
CVBS
|
Video Blanking Sync.
|
Analog format
|
Use
 |
|
C
|
|
1. Up
|
|
2. Left
|
|
3. Down
|
|
4. Right
|
|
5. Confirm (press)
|
- If desired, change the settings before mounting the camera.
1. Press A1 to enter the On-screen Display (OSD) menu.
2. Tilt A1 to navigate through the menu.
3. Press A1 to select and confirm settings.
|
Exposure mode
|
Auto exposure / Black light compensation
|
|
White balance
|
Auto
|
|
Day & night
|
Auto / Black / Color
|
|
Advanced function
|
Digital wide dynamic / Defog
|
|
Image adjustment
|
Sharpen / Saturability / Reference brightness
|
Mounting the security camera
- You can mount the camera to a wall or ceiling.
1. Ensure that A5 is at the top.
2. Draw three marks to indicate the desired location.
3. Drill the holes and place the plugs A10.
4. Fasten the camera with A9.
5. Rotate A4 in the desired angle.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
 |
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
|
