Wi-Fi Security Camera User Manual
Welcome home
This guide will assist you to get a
quick start and to learn the operation
of the device effectively.
Box contents:
- Security Wi-Fi Camera *1
- Mounting bracket*1
- USB cable*1
- Wall screws*3
- Screw anchors*3
- User manual
- Magnet base (Optional)
Getting to know your device
Product Features:
View live streaming video / security monitoring
Records Video up to 1080P HD
Camera view angle 110°
Night infrared for night time use and recording
2 way intercom function
Built-in motion detector for sensor notifications and can set to record on motion
Control this device and monitor via the Tycam APP
Easily setup and install this WIFI camera in minutes
When network connected, press WIFI to enter AP mode. Reboot the device and it will connect to the WIFI hotspot automatically. If no WIFI, the mobile phone can connect the device and monitor in AP mode.
LED indicator status
Initial set-up
- Get power supply
Plug the device into a power outlet. Device boots up.
- Install APP
Search Tycam directly from the App Store or Google Play. Open the APP on your Android or iOS device.
- Create account
Register by Email and password. Validate your email and return to login.
- Add device
Scan the QR code on device or box.
Add local WiFi
Press“Next” to get the QR code
Face the phone screen to the camera
Binding camera
Press “Start Using” to explore more.
Installation
Put the device on a flat surface with the magnetic base (optional) or install it on the wall or the ceiling
Notice:
a) Before installation, please make sure the device is close to the power socket.
b) Before secure the pin and the screw, please drill holes on flat and solid surface.
Wall mount installation
Remove the pin from wall mount
Drill holes
Drill holes on the wall according to the position of the pin holes
Secure the pin to the wall
Place 3 screw anchors into the holes, then secure the pin to the. wall with the 3 screws.
Specifications
Wi-Fi Security Camera User Manual – Download [optimized]
Wi-Fi Security Camera User Manual – Download
References
- User Manualmanual.tools
Good morning,
I have the Arenti GO1 wire free security camera. The visual alarm works all right for motion detection but there is no audible alarm to my phone so that I know when to look. Please advise me how to get an audible alarm to my phone. Unless one has an audible alarm how is it possible to react in real time, for example if someone is outside your door and you want to talk to them?
I have the Arenti GO1 wire free security camera. The visual alarm works all right for motion detection but there is no audible alarm to my phone so that I know when to look. Please advise me how to get an audible alarm to my phone. Unless one has an audible alarm how is it possible to react in real time, for example if someone is outside your door and you want to talk to them?
How do I enable audible notifications on my phone for the Arenti GO1 security camera?
To receive audible alerts on your phone for your Arenti GO1 camera, you must ensure that both the app settings and your smartphone's system settings are configured correctly. Please follow these steps:
Note: While the post context mentions the Tycam APP, the Arenti GO1 specifically typically uses the Arenti or Laxihub app. If you are using the Tycam app as suggested by the manual on this page, the steps remain similar: check the Alert/Notification settings within the app and your phone's system settings.
Read the full Q&A page