Gwida għall-Utent tal-Applikazzjoni tal-Windows tad-Decoder 4O3A B2BCD
Gwida għall-Aġġornament tal-Firmware B2BCD
Firmware version 1.5.0.
Niżżel l-aħħar utilità B2BCD misjuba fuq il- websit, taħt Apparat ieħor – B2BCD: https://4o3a.com/support/downloads
Installa l-applikazzjoni, qabbad il-B2BCD tiegħek mal-PC tiegħek permezz tal-USB u qabbad billi tuża l-Utilità B2BCD.
In order to upgrade the firmware on the device you need to enter the bootloader mode. While focusing the utility, hold Ctrl + Alt + B. Ikkonferma d-dħul fil-modalità bootloader.
Right click on your Band2BCD icon and select Miftuħa File Post.
In the same folder where the B2BCD Utility is installed you will find Band2BCD_USBBootloader.zip
Estratt this zip and and it will create a new folder. run the HIDBootloader.exe
Mexxi l- HIDBootloader.exe
Ikklikkja fuq il- Open Firmware Image button and load the new firmware image. The version of the firmware must match your app version, in this case band2bcd_v1_5_0.hex
L-inadempjenza file triq hija C:\Programm Files (x86)\4O3A Firma\Band2BCD
Ikklikkja l- Erase/Program/Verify Device and wait for the process to end.
After installing the new firmware, power cycle the device by unplugging and plugging in the power connector.
Dokumenti / Riżorsi
 |
4O3A B2BCD Decoder Windows Application [pdfGwida għall-Utent B2BCD Decoder Windows Application, Decoder Windows Application, Windows Application |