iMac
“
Specifications:
- Product: iMac 2006-2011 Memory Module
- Manufacturer: Americanino Ltd T/A Mr Memory
- Model: IMAC 2006-2011
- Country of Origin: United Kingdom
Product Usage Instructions:
What You Will Need:
- Clear workspace
- Clean towel or blanket
- New memory module(s)
- Screwdriver
Preparation:
To prevent any potential damage from anti-static electricity,
discharge yourself by touching a grounded metal object like a
radiator.
Installation Steps:
- Make sure the iMac is powered off and all cables are
disconnected. - Lay a towel/blanket on your workspace and place the iMac face
down on it. - Use a screwdriver to remove the Memory Cover at the bottom of
the iMac. - Gently pull out the original memory, noting the position of the
notch. - Insert the new memory into the slots with even pressure.
- Screw the memory cover back on.
- Start up your iMac and check if the new memory is recognized
correctly.
If you need further installation support, contact our Customer
Care & Support Team at the provided address.
FAQ:
Q: Do I need to install both memory modules at the same
time?
A: It is recommended to install memory modules in pairs for
optimal performance, but you can install them one at a time if
necessary.
Q: Can I use third-party memory modules with my iMac?
A: While it is possible, it’s recommended to use compatible
memory modules to ensure proper functionality and compatibility
with your iMac.
“`
We are a company based in the UK
27″ APPLE IMAC 2006-2011 MEMORY INSTALLATION GUIDE
®
IMAC 2006-2011 MEMORY INSTALLATION GUIDE
WHAT YOU WILL NEED
CLEAR WORKSPACE
CLEAN TOWEL OR BLANKET
NEW MEMORY MODULE(S)
SCREWDRIVER
TO PREVENT ANY POTENTIAL DAMAGE FROM ANTI STATIC ELECTRICITY, YOU SHOULD DISCHARGE YOURSELF FIRST. THIS CAN BE DONE BY TOUCHING A GROUNDED METAL OBJECT – SUCH AS A RADIATOR.
STEP 1
Make sure the iMac is powered off and all cables have been disconnected from the machine.
STEP 2
Lay the towel/blanket onto your workspace and carefully lay the iMac down on it (holding the sides of the machine). The screen should be facing down.
STEP 3
Use a screwdriver to remove the Memory Cover located at the bottom of the iMac.
Americanino Ltd T/A Mr Memory, D3 Yeoman Gate, Yeoman Way, Worthing, West Sussex, BN13 3QZ, UK
Company Registration Number: 2012072
VAT No. 641166065
IMAC 2006-2011 MEMORY INSTALLATION GUIDE
STEP 4
Gently pull out the original Memory, noting the position of the notch, as you will need to install the new memory module in the same way.
Please note: Don’t worry about which way the stickers are facing as they will be in different places on different modules
STEP 5
Insert the new memory into the slots, you will need a slight even pressure to do this.
STEP 6
Screw the memory cover back on.
STEP 7
Ensure that the new memory modules are being recognized correctly by your iMac.
1. Start up your iMac. 2. Click on the Apple symbol in the top right. 3. Click `About This mac’ 4. Click on the `Memory’ tab.
IF YOU REQUIRE ANY FURTHER INSTALLATION SUPPORT, PLEASE CONTACT OUR CUSTOMER CARE & SUPPORT TEAM
Americanino Ltd T/A Mr Memory, D3 Yeoman Gate, Yeoman Way, Worthing, West Sussex, BN13 3QZ, UK
Company Registration Number: 2012072
VAT No. 641166065
Documents / Resources
![]() |
Mr Memory iMac [pdf] Installation Guide 2006, 2007, 2008, 2009, 2010, 2011 |