Xeon E5-2680 v4 Processor
“
Спецификации
| Спецификација | Детали |
|---|---|
| Processor Series | Intel Xeon E5 v4 Family |
| Име на код | Broadwell-EP |
| Вкупно јадра | 14 |
| Total Threads | 28 |
| Base Clock Speed | 2.4 GHz |
Производот завршиview
The Intel Xeon E5-2680 v4 processor is a high-performance
server/workstation CPU designed for demanding computational tasks.
Part of Intel’s Broadwell-EP family, this 14-core processor offers
excellent multi-threading performance, making it ideal for
virtualization, data analysis, rendering, and other intensive
оптоварувања на работа.
Водич за инсталација
Предупредување: Always handle the processor by its
edges. Avoid touching the pins on the CPU or socket. Static
electricity can damage the processor, so use an anti-static wrist
strap when handling components.
Упатство за употреба на производот
Компатибилни компоненти
This processor requires specific server/workstation components
and is not compatible with consumer desktop parts.
Препорачани матични плочи
- Intel C612 (Server chipset)
- Intel X99 (Workstation chipset) – Note: Not all X99 boards
support Xeon processors
Барања за меморија
This processor requires DDR4 Registered ECC memory (RDIMMs):
- Type: DDR4 Registered ECC (RDIMM)
- Speeds: 2133MHz, 2400MHz (native support)
Cooling Solutions
Due to the 120W TDP, a capable cooling solution is required:
- Server-grade air coolers with adequate heatsinks
Барања за напојување
Recommended power supply specifications:
- Minimum 600W for single CPU configurations
Други размислувања
- This CPU does not include integrated graphics – a discrete GPU
се бара
Најчесто поставувани прашања
Q: Can the Intel Xeon E5-2680 v4 processor be used with
consumer desktop motherboards?
A: No, this processor is not compatible with consumer desktop
motherboards as it requires specific server/workstation
компоненти.
„`
Intel Xeon E5-2680 v4 Processor
Упатство за користење и упатство за инсталација Преземете како Word документ
Производот завршиview
The Intel Xeon E5-2680 v4 processor is a high-performance server/workstation CPU designed for demanding computational tasks. Part of Intel’s Broadwell-EP family, this 14-core processor offers excellent multi-threading performance, making it ideal for virtualization, data analysis, rendering, and other intensive workloads.
Important Note: This is a server/workstation-grade processor that requires specific motherboard chipsets and registered ECC memory. It is not compatible with consumer desktop motherboards.
Спецификации
Спецификација
Детали
Processor Series
Intel Xeon E5 v4 Family
Име на код
Broadwell-EP
Вкупно јадра
14
Total Threads
28
Base Clock Speed
2.4 GHz
Max Turbo Frequency 3.3 GHz
Кеш
35 MB SmartCache
Брзина на автобусот
9.6 GT/s QPI
TDP
120 W
Сокет
LGA 2011-3 (Socket R3)
Макс. Големина на меморија
1.5 TB (Dependent on motherboard)
Типови на меморија
DDR4 1600/1866/2133/2400 MHz
Max Memory Channels 4
ECC Memory Supported
Yes (Required)
PCI Express Revision
3.0
Max PCI Express Lanes
40
Комплет инструкции
64-битни
Instruction Extensions
AVX 2.0
Технологија за виртуелизација
Intel VT-x со продолжени табели со страници (EPT)
Напредни технологии
Turbo Boost Technology 2.0, Hyper-Threading Technology, vPro Technology
Компатибилни компоненти
Warning: This processor requires specific server/workstation components and is not compatible with consumer desktop parts.
Препорачани матични плочи
Intel Xeon E5-2680 v4 requires motherboards with the following chipsets:
Intel C612 (Server chipset) Intel X99 (Workstation chipset) – Note: Not all X99 boards
support Xeon processors Server boards from Supermicro, ASUS, Gigabyte, Tyan, etc. Popular compatible motherboards include: Supermicro X10SRA-F ASUS Z10PE-D16 WS Gigabyte GA-7PESH3 ASRock X99 Taichi (with BIOS update) Various dual-socket server boards for multi-processor
конфигурации
Барања за меморија
This processor requires DDR4 Registered ECC memory (RDIMMs): Type: DDR4 Registered ECC (RDIMM) Speeds: 2133MHz, 2400MHz (native support) Recommended configuration: Install in multiples of 4 for optimal performance Check motherboard QVL for compatible memory modules
Cooling Solutions
Due to the 120W TDP, a capable cooling solution is required:
Server-grade air coolers with adequate heatsinks Liquid cooling solutions with LGA 2011-3 compatibility Ensure proper case airflow for optimal thermal performance
Барања за напојување
Recommended power supply specifications: Minimum 600W for single CPU configurations 800W+ for dual CPU configurations or systems with high-end GPUs 80 Plus Gold certification or better recommended Ensure adequate EPS12V connectors (8-pin or dual 8-pin for high-end boards)
Други размислувања
This CPU does not include integrated graphics – a discrete GPU is required
Ensure your case supports the form factor of your chosen motherboard (ATX, EATX, SSI-EEB, etc.)
For multi-processor configurations, ensure both CPUs are identical
Водич за инсталација
Warning: Always handle the processor by its edges. Avoid touching the pins on the CPU or socket. Static electricity can damage the processor, so use an anti-static wrist strap when handling components.
1 Prepare the Motherboard Place the motherboard on a flat, non-conductive surface. Remove the socket cover if present.
2 Open the Socket Lift the socket lever to the fully open position (approximately 135 degrees). Then lift the load plate.
3 Align the Processor Hold the processor by its edges and align it with the socket. The CPU has notches and a golden triangle that match indicators on the socket.
4 Install the Processor Gently place the processor into the socket. Do not force it – if properly aligned, it should drop into place easily. Do not press down on the CPU.
5 Close the Socket Close the load plate, then lower the socket lever and secure it under the retention clip.
6 Apply Thermal Interface Material Apply a pea-sized amount of quality thermal paste to the center of the processor’s heat spreader.
7 Install the Cooler Align the cooler with the mounting brackets and secure it according to the cooler’s instructions. Connect the cooler’s power cable to the appropriate header on the motherboard.
8 Install Memory Install DDR4 Registered ECC memory modules according to your motherboard’s recommended configuration (usually starting with slots farthest from the CPU).
Note: Before powering on the system, ensure that all connections are secure, including power cables to the motherboard and CPU, memory modules are fully seated, and the CPU cooler is properly installed.
Решавање проблеми
System Won’t Power On
Possible causes: Incorrect power connections, faulty power supply, motherboard compatibility issue.
Solutions: Check all power connections (24-pin ATX, 8-pin EPS), verify PSU functionality, ensure motherboard compatibility with Xeon E5 v4 processors.
Нема излез на екранот
Possible causes: No discrete graphics card installed, graphics card not properly seated, monitor connected to wrong port.
Solutions: Install a discrete graphics card (this CPU has no integrated graphics), reseat the graphics card, ensure monitor is connected to the graphics card outputs.
Memory Not Detected or Errors
Possible causes: Using non-ECC or unbuffered memory, memory not fully seated, incompatible memory.
Solutions: Ensure you’re using DDR4 Registered ECC memory, reseat memory modules, try different memory slots, check motherboard QVL for compatible memory.
BIOS Doesn’t Recognize CPU
Possible causes: Outdated BIOS, incompatible motherboard.
Solutions: Update motherboard BIOS to latest version (may require a compatible CPU for flashing), verify motherboard compatibility with Xeon E5 v4 processors.
System Instability or Overheating
Possible causes: Inadequate cooling, improper thermal paste application, insufficient power delivery.
Solutions: Ensure CPU cooler is properly installed, reapply thermal paste, check temperatures in BIOS, verify PSU adequacy.
PCIe Devices Not Recognized
Possible causes: BIOS settings, incompatible devices, insufficient PCIe lanes.
Solutions: Check BIOS settings for PCIe configuration, try different slots, ensure devices are compatible with the system.
Note: For dual-processor configurations, ensure both CPUs are identical and that all required power connections are made (additional EPS12V connectors may be required).
Оптимизација на перформанси
Поставки на BIOS-от
For optimal performance, consider these BIOS settings: Enable Turbo Boost Technology Enable Hyper-Threading Technology Set memory speed to highest supported frequency (2133MHz or 2400MHz) Enable XMP profiles if supported by your memory and motherboard Configure power settings for performance (disable power-saving features if maximum performance is desired)
Operating System Configuration
For server/workstation use: Use Windows Server or Windows 10/11 Pro for Workstations Install latest chipset drivers from motherboard manufacturer Set power plan to “High performance” For virtualization, enable VT-d in BIOS and install appropriate hypervisor
Размислувања за ладење
To maintain optimal performance: Ensure adequate case airflow Monitor temperatures using utilities like HWMonitor or Open Hardware Monitor
Consider upgrading cooling solution if temperatures exceed 80 C under load
Документи / ресурси
 |
Intel Xeon E5-2680 v4 Processor [pdf] Водич за инсталација E5-2680 V4, Xeon E5-2680 v4 Processor, Xeon E5-2680 v4, Xeon, Processor |