Philips 44W 4200 lm Motion Sensor LED Security Light Outdoor Instruction Manual

1. Производот завршиview

The Philips 44W 4200 lm Motion Sensor LED Security Light is designed for outdoor use, providing bright and efficient illumination. This 2-pack floodlight features a Passive Infrared (PIR) motion sensor, 5000K daylight color temperature, and is built to withstand various weather conditions. Its adjustable heads and multiple operating modes offer versatile lighting solutions for your property.

Image: Philips 44W 4200 lm Motion Sensor LED Security Light (2-pack) in black.

2. Информации за безбедност

• Секогаш исклучувајте го напојувањето на прекинувачот пред инсталација или сервисирање.
• Консултирајте се со квалификуван електричар доколку не сте сигурни за процесот на инсталација.
• Осигурајте се дека сите жичени врски се безбедни и се во согласност со локалните електрични кодови.
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
• Држете ги децата подалеку од местото за инсталација.

3. Што има во кутијата

Each Philips 44W 4200 lm Motion Sensor LED Security Light package includes the following components:

• LED Security Light Fixture (2 units for this pack)
• ЛЕД леќа
• Mounting Hardware (screws, wire nuts, mounting plate, rubber plug, gasket)
• Упатство за употреба

Image: Included accessories for installation.

4. Карактеристики

• Висока осветленост и широк агол на зрак: Emits 4200 lumens with a 5000K cool daylight color temperature. Two adjustable heads provide customizable coverage.
• High-Sensitivity PIR Sensor: Detects motion within a 0-69ft range and 180° induction angle. Lighting time is adjustable from 1-10 minutes.
• 4 режими на осветлување: Includes Test Mode, Security Mode, Dusk to Dawn Mode, and Manual Override Mode (always-on at 80% brightness for up to 6 hours).
• Издржлив и водоотпорен: Constructed with aluminum lamp material, tested for corrosion and rust resistance, and rated IP65 for various weather conditions.
• LED за заштеда на енергија: Integrated LED design eliminates bulb replacement and reduces electricity costs by up to 80% compared to 220W incandescent fixtures.
• Adjustable Head Design: Customize each light head's angle to suit specific lighting needs.

Image: Key features of the Philips security light.

Image: Adjustable head design for flexible lighting coverage.

Image: Aluminum construction for durability and heat dissipation.

5. Инсталација

The Philips security light is designed for easy installation. It requires hardwiring; a junction box is not included. Follow these general steps for installation:

1. Подготовка на жици: Ensure power is off at the circuit breaker. Connect the ground wire (green) from the light fixture to the ground wire in the junction box.
2. Поврзете жици: Connect the white wire (neutral) from the light fixture to the white wire from the junction box using a wire nut. Connect the black wire (live) from the light fixture to the black wire from the junction box using a wire nut.
3. Плоча за монтирање: Прицврстете ја монтажната плоча на разводна кутија.
4. Прикачи тела: Align the light fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal between the lamp and the wall to enhance water resistance.
5. Печат: Apply sealant around the fixture base to prevent water leakage.
6. Прилагодете глави: Прилагодете ги светлосните глави и сензорот за движење на посакуваните агли.

Recommended installation height: 8.2 ft.

Image: Easy installation steps for the security light.

Image: Two common mounting methods: eave and wall mounting.

Видео за инсталација

6. Работни режими

The Philips security light offers four distinct operating modes to suit various needs:

Слика: Надview of the four available lighting modes.

1. Режим на тестирање: Can be activated in both daytime and nighttime. When motion is detected, the light turns on for 5 seconds. If no motion, it stays off. This mode is useful for verifying sensor functionality and coverage area during installation.


Image: Test Mode operation.

2. Безбедносен режим: Operates only at nighttime. When motion is detected, the light automatically turns on for a set duration (1, 3, or 10 minutes). If no motion, it stays off.


Image: Security Mode operation.

3. Режим од самрак до зори: Operates only at nighttime. The light automatically turns on at dusk and turns off at dawn. When motion is detected, the light brightens to 100% and then dims to 20% when no one is around.

Image: Dusk to Dawn Mode operation.
4. Рачен режим на прескокнување: Can be activated in both daytime and nighttime. This mode keeps the light on at 80% brightness for a maximum of 6 hours. To activate, switch the light OFF and ON twice within 3 seconds. To deactivate, switch the light OFF and ON for more than 3 seconds, returning it to sensor mode. The brightness automatically dims from 100% to 80% after 12 minutes in this mode.


Image: Manual Override Mode activation and deactivation.

7. Прилагодување на поставките

The motion sensor allows for adjustment of both sensing distance and activated lighting time:

• Чувство на растојание: Adjust the 'DISTANCE' dial on the sensor to set the detection range:
  • L (Low): 0-20 ft
  • M (Medium): 0-39 ft
  • H (High): 0-69 ft
• Activated Lighting Time: Adjust the 'TIME' dial on the sensor to set how long the light stays on after motion is detected:
  • 1 MIN: 1 minute
  • 3 MIN: 3 minutes
  • 10 MIN: 10 minutes

Image: Dials for adjusting sensing distance and lighting time.

Image: Switch tips for adjusting sensor settings.

8. Одржување

To ensure optimal performance and longevity of your Philips security light, follow these maintenance guidelines:

• Чистење: Периодично чистете го светилката и леќата на сензорот за движење со мека, дamp крпа. Избегнувајте употреба на абразивни средства за чистење или растворувачи кои би можеле да ја оштетат завршната обработка или електронските компоненти.
• Инспекција: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. Ensure the sealant around the base remains intact to maintain its waterproof rating.
• Нема замена на сијалица: This unit features integrated LED lighting, meaning there are no bulbs to replace.

9 Смена на проблеми

If you encounter issues with your Philips security light, refer to the following common troubleshooting steps:

• Светлото што не се вклучува:
  • Проверете го напојувањето кај прекинувачот.
  • Ensure the motion sensor is not obstructed.
  • Verify the operating mode settings (e.g., if in Security Mode, ensure it's dark enough).
  • Adjust the 'DISTANCE' and 'TIME' settings on the sensor.
• Светлото останува вклучено континуирано:
  • Check if the light is in Manual Override Mode. Refer to Section 6 for deactivation instructions.
  • Ensure the 'TIME' setting is not set too high.
  • Verify that there is no continuous motion within the sensor's detection range.
• Сензорот за движење не детектира:
  • Ensure the sensor lens is clean and free from obstructions.
  • Adjust the 'DISTANCE' setting to a higher sensitivity.
  • Verify the sensor's angle and position to cover the desired area.
  • Test the sensor in 'Test Mode' to confirm functionality.

Видео за производот

10. Спецификации

11. Гаранција и поддршка

Philips products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Philips webстраницата или директно контактирајте ја нивната служба за корисници. Чувајте ја сметката за купување како доказ за купување за гаранциски побарувања.

За повеќе информации, посетете ја Продавница на Филипс на Амазон.