Philips SH71/50

Philips SH71/50 Shaving Heads User Manual

For Philips Shavers Series 7000 (S7XXX) and Series 5000 (S55XX)

1. Вовед

These Philips SH71/50 replacement shaving heads are designed to restore your Philips electric shaver to optimal performance. Regular replacement of shaving heads is crucial for maintaining a close, comfortable shave and ensuring the longevity of your shaver. It is recommended to replace shaving heads every two years, as they perform approximately 9 million cutting actions within this period.

2. Информации за безбедност

For safe and optimal use of your Philips SH71/50 shaving heads, please observe the following guidelines:

  • The blades are sharp and can cause cuts; handle with care during installation and cleaning.
  • Improper use or installation may lead to skin irritation.
  • Always clean and dry the shaver and its heads after each use to prevent bacterial growth and maintain hygiene.
  • Do not use the shaver near water or while it is charging.
  • Replace shaving heads every two years for optimal performance and safety.

3. Компатибилност

The Philips SH71/50 shaving heads are compatible with the following Philips shaver series:

  • Philips Shavers Series 7000 (S7XXX models)
  • Philips Shavers Series 5000 (angular-shaped S55XX models)

These heads replace previous models such as RQ12/70, RQ12/60, SH60/70, and SH70/70.

4. Инструкции за инсталација

Follow these steps to replace the shaving heads in your Philips electric shaver:

  1. Prepare the Shaver: Ensure your shaver is turned off and unplugged. If necessary, clean the shaver head assembly before proceeding.
  2. Open the Shaver Head: Open the shaver head unit according to your shaver's specific model instructions. This usually involves pressing a release button or gently pulling the head open.
  3. Remove the Retainer: Locate and remove the retainer ring or frame that holds the shaving heads in place.
  4. Remove Old Shaving Heads: Carefully lift out the old shaving heads from their positions.
  5. Insert New Shaving Heads: Place the new Philips SH71/50 shaving heads into the shaver head unit. Ensure each head is correctly aligned in its designated slot.
  6. Replace the Retainer: Securely place the retainer ring or frame back over the new shaving heads. Ensure it clicks into place, holding the heads firmly.
  7. Close the Shaver Head: Close the shaver head unit until you hear a click, indicating it is properly secured.
Three individual Philips SH71/50 replacement shaving heads

Image: Three individual Philips SH71/50 replacement shaving heads, ready for installation.

Philips shaver head assembly with three blue shaving heads installed

Image: A Philips shaver head assembly with three blue SH71/50 shaving heads installed, showing the 'Wet & Dry' indicator.

5. Одржување

To ensure the best performance and hygiene of your Philips SH71/50 shaving heads:

  • Секојдневно чистење: After each shave, rinse the shaver head under running water to remove hair and debris. For a more thorough clean, use a cleaning spray like HQ110, following its specific instructions.
  • Сушење и складирање: After cleaning, allow the shaver head to air dry completely before storing it in a dry place.
  • Фреквенција на замена: For optimal cutting performance and skin comfort, replace your shaving heads every two years.

6. Спецификации

КарактеристикаДетал
Број на моделSH71/50
БрендФилипс
Број на сечила3 (по сет)
Препорачана употребаБричење на брада
Број на единици1.0 Count (referring to one set of 3 heads)
Димензии на производот0.39 x 0.39 x 0.39 inches (individual head, approximate)
Тежина1.06 ounces (total package, approximate)
Ватtage0 watts (as replacement parts)

7 Смена на проблеми

If you experience issues after replacing your shaving heads, consider the following:

  • Лоши перформанси за бричење: Ensure the new heads are correctly installed and securely clicked into place. Verify compatibility with your shaver model.
  • Иритација на кожата: Confirm the heads are clean and free of debris. Ensure proper installation. If irritation persists, consult your shaver's main manual or a dermatologist.
  • Heads Not Fitting: Double-check that you have the correct SH71/50 model for your specific Philips Series 7000 (S7XXX) or Series 5000 (angular-shaped S55XX) shaver.

8. Гаранција и поддршка

For information regarding warranty coverage or technical support for your Philips SH71/50 shaving heads, please refer to the documentation provided with your original Philips shaver or visit the official Philips support webстраница. Зачувајте го доказот за купување за какви било гаранциски побарувања.

9. Правно одрекување

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a shaver replacement part and not a dietary supplement.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.