Филипс 800144

Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Модел: 800144

Производот завршиview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Philips 800144 Downlight Surface Mounted LED Fixture

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Клучни карактеристики:

  • Енергетска ефикасност: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
  • Долг животен век: Rated for 36,000 hours (based on 3 hours/day usage).
  • Разновидна монтажа: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
  • Мека бела светлина: Provides a comfortable ambiance for general room lighting.
  • Затемнувач: Compatible with dimmer switches for adjustable brightness.
  • Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Поставување и инсталација

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Чекори за инсталација:

  1. Безбедноста на прво место: Ensure power to the installation area is turned off at the circuit breaker before beginning.
  2. Подгответе ја површината за монтирање: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
  3. Поврзете жици: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
  4. Прицврстувач за монтирање: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
  5. Вратете ја моќноста: Откако светилката е безбедно монтирана и поврзана, вратете го напојувањето на прекинувачот.
  6. Тест функционалност: Вклучете го прекинувачот за светла за да проверите дали работи правилно.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Упатства за работа

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Температура на светла боја:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Color Temperature Chart for LED Lighting

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Функционалност со затемнување:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Одржување

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Чистење:

  • Пред чистење, проверете дали напојувањето на уредот е исклучено на прекинувачот.
  • Избришете ја надворешноста на апаратот со мека, дamp крпа.
  • Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
  • Пред повторно да го вклучите напојувањето, проверете дали апаратот е целосно сув.

Решавање проблеми

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

  • Светлото не се вклучува:
    • Проверете го прекинувачот за да се осигурате дека уредот е напојуван со струја.
    • Проверете дали прекинувачот за светла е во положба „вклучено“.
    • Проверете ги жичните поврзувања за лабавост или оштетување (проверете дали е исклучено напојувањето пред проверка).
  • Трепкања на светлината:
    • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
    • Проверете дали има лабави врски со жици.
    • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
  • Light is Dim or Uneven:
    • If using a dimmer, ensure it is set to the desired brightness level.
    • Verify that the fixture is receiving the correct voltage (120 волти).

Доколку овие чекори не го решат проблемот, контактирајте ја службата за корисничка поддршка на Philips за дополнителна помош.

Спецификации

КарактеристикаСпецификација
БрендФилипс
Број на модел800144
Форма на светлечки телаТаванот
Тип на монтирањеПовршински монтиран
Извор на светлинаLED
Ватtage13 вати (еквивалент на 75W)
Осветленост1100 лумени
Светла бојаМека бела
Voltage120 волти
ЗатемнувачкоДа
Животниот век36,000 часа
Внатрешна/надворешна употребаOutdoor (suitable for wet locations)
Ниво на отпорност на водаВодоотпорен
Спецификација исполнетЕнергетска ѕвезда
Тежина на ставката15.04 унци

Информации за гаранцијата

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 години за делови и труд од датумот на купување. Ве молиме зачувајте го доказот за купување за гаранциски барања.

For warranty service or questions, please contact Philips customer support.

Поддршка за корисници

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips webстраница за контакт информации и ресурси за поддршка.

Производител: Philips осветлување

Бренд: Филипс