MIDLAND C1502 Mesh and Bluetooth Conference System
ON/OFF
DESCRIPTION OF BUTTONS
SWITCH ON
SWITCH OFF
PAIRINGS
ATTENTION: To carry out any pairings you need to access Settings. If the Control button is pressed for fewer than 7 seconds, the device will switch itself on instead of accessing Settings. If this occurs, repeat the process.
ACCESS SETTINGS
PHONE, GPS, TFT PAIRING
Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -.
MIDLAND INTERCOM PAIRING
Note: to pair another BT Pro/Pro S intercom, follow the same procedure using the Up button.
OTHER BRAND INTERCOM PAIRING
MESH DYNAMIC REPEAT SECURE PAIRING
RESET BLUETOOTH PAIRINGS
MESH DYNAMIC REPEAT SECURE RESET
EXIT SETTINGS MODE CANCEL PAIRING
OPERATING MODES
- Intercom Mode: to communicate with another device via Mesh or Bluetooth.
- Phone Mode: for phone calls or for managing music.
- FM Radio Mode: to listen to, search for and store radio stations.
Note: Phone mode is only active when there are devices paired to the Vol+/Vol- buttons.
CHOOSE OPERATING MODE
Note: By pressing simultaneously Vol + and Vol – for 1 second, BT Rush communicates the selected operating mode.
Attention: to communicate the participants must be in the same Mesh group and have different IDs.
Conference Mesh Group: 10 people in a 1.4 Km bubble.
Mesh Dynamic Repeat Group: 6 people within 3.5 Km.
Mesh Dynamic Repeat Secure Group: 6 people within 3.5 Km with Secure key assigned for private communications.
TABLE 1 – IDS ASSIGNED TO THE VARIOUS GROUPS:
Guest: listening mode only
INTERCOM MODE
The default Mesh Group is set to Dynamic Repeat. For further information consult the online manual (www.midlandeurope.com) or the tutorials on YouTube – Midland World.
MESH IDENTIFICATION CODE (ID) SELECTION
FUNCTION DESCRIPTION
MESH COMMUNICATION ACTIVATION/DEACTIVATION
TO OPEN/CLOSE INTERCOM MANUALLY
Note: to communicate with Rider 1 repeat the process of pressing the Up button.
TO OPEN/CLOSE INTERCOM BY VOICE
Note: Voice activation is only possible with an intercom paired with the down button.
VOX ACTIVATION/DEACTIVATION
SHORTCUT: In Intercom mode pressing Control 2 times activates/deactivates the music.
TO OPEN/CLOSE UNIVERSAL INTERCOM
Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call 2 times)
SWITCHING FROM MESH CONFERENCE TO MESH DYNAMIC REPEAT
SHORTCUT: In Phone/FM Radio modes pressing Control 2 times activates/deactivates Mesh communication.
PHONE MODE
FUNCTION DESCRIPTION
MAKING A CALL
Note: If you have a phone paired with the Vol – button, use the Down button.
SHORTCUT: In Phone/FM Radio modes pressing the Down button 2 times turns the Intercom on/off.
ANSWERING/ENDING A CALL REJECTING A CALL
Note: If you have a phone paired with the Vol – button, use the Down button.
MUSIC
RADIO MODE
FM RADIO
Go to our website www.midlandeurope.com, download the complete manual and the BT Updater software. Customize your intercom with the BTPRO NetApp.
Download it here:
Documents / Resources
 |
MIDLAND C1502 Mesh and Bluetooth Conference System [pdf] User Guide C1502, Mesh and Bluetooth Conference System, C1502 Mesh and Bluetooth Conference System, Bluetooth Conference System, Conference System |
