MIDLAND -logoBTRUSH
MESH & BLUETOOTH CONFERENCE SYSTEM

MIDLAND BTRUSH Mesh and Bluetooth Conference System -

HIGH DEFINITION SOUND BY RFC
POCKET GUIDE

ON/OFF

DESCRIPTION OF BUTTONS

SWITCH ON

MIDLAND BTRUSH Mesh and Bluetooth Conference System -swtich

SWITCH OFF

MIDLAND BTRUSH Mesh and Bluetooth Conference System - swtich on

PAIRINGS

DESCRIPTION OF BUTTONS

MIDLAND BTRUSH Mesh and Bluetooth Conference System -PAIRINGS

ATTENTION: To carry out any pairings you need to access Settings. If the Control button is pressed for fewer than 7 seconds, the device will switch itself on instead of accessing Settings. If this occurs, repeat the process.

ACCESS SETTINGS

Status: device off

PHONE, GPS, TFT PAIRINGBluetooth
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -PHONE

Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -.

MIDLAND INTERCOM PAIRINGBluetooth
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -MIDLAND

Press for 3 seconds Press for 3 seconds
MIDLAND -icon Flashes Flashes MIDLAND -icon2
Confi rm (1 sec.) Confi rm (1 sec.)

Pairing successful

OTHER BRAND INTERCOM PAIRINGBluetooth
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -OTHER BRAND

prss for 7 seconds Follow procedure to pair with phone
 

MIDLAND -icon3

Flashes fast (press and hold)
Flashes slowly (Release)
MESH DYNAMIC REPEAT SECURE PAIRING MIDLAND -icon7
Status: Settings
MASTER OTHER MEMBERS of the GROUP
MIDLAND BTRUSH Mesh and Bluetooth Conference System -MESH

Press for 7 seconds

Press for 3 seconds

MIDLAND -icon4 Flashes fast

 MIDLAND -icon5  Flashes

When the intercoms of all members have received the
Secure code (fl ashing stops) press the Control button 2 times.

MIDLAND -icon6 Code received

RESET BLUETOOTH PAIRINGS Bluetooth

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -RESET

MESH DYNAMIC REPEAT SECURE RESET MIDLAND -icon7

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -MESH1

Frequency (GHz) Max power (mW)
2.402 – 2.480 100

EXIT SETTINGS MODE CANCEL PAIRING

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -EXIT

OPERATING MODES

A. Intercom Mode: to communicate with another device via Mesh or Bluetooth.
B. Phone Mode: for phone calls or for managing music.
C. FM Radio Mode: to listen to, search for, and store radio stations.
Note: Phone mode is only active when there are devices paired to the Vol+/Vol- buttons.

CHOOSE OPERATING MODE

MIDLAND BTRUSH Mesh and Bluetooth Conference -

Note: By pressing simultaneously Vol + and Vol – for 1 second, BT Rush communicates the selected operating mode.
Attention: to communicate the participants must be in the same Mesh group and have different IDs.

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig1

Conference Mesh Group: 10 people in a 1.4 Km bubble.
Mesh Dynamic Repeat Group: 6 people within 3.5 Km.
Mesh Dynamic Repeat Secure Group: 6 people within 3.5 Km with Secure key assigned for private communications.

INTERCOM MODE

The default Mesh Group is set to Dynamic Repeat. For further information consult the online manual (www.midlandeurope.com) or the tutorials on YouTube – Midland World.

MESH IDENTIFICATION CODE (ID) SELECTION
MIDLAND BTRUSH Mesh and Bluetooth Conference -fig3

TABLE 1 – IDS ASSIGNED TO THE VARIOUS GROUPS:

GROUP ID GUEST LED
MIDLAND-iconMesh Conference 1-10 Infi nite MIDLAND-icon3
MIDLAND-icon1Mesh Dynamic Repeat 1-6 Infi nite MIDLAND-icon4
MIDLAND-icon2Mesh Dynamic Repeat Secure 1-6 Infi nite MIDLAND-icon5

Guest: listening mode only

FUNCTION DESCRIPTION

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig7

Note: to communicate with Rider 1 repeat the process of pressing the Up button.

TO OPEN/CLOSE INTERCOM BY VOICEBluetooth

Status: in all modes

MIDLAND-icon7 Say “Hi”
Jingle
Flashes
Silent for 40 sec. the intercom deactivates
Beep

Note: Voice activation is only possible with an intercom paired with the down button.

VOX ACTIVATION/DEACTIVATIONBluetooth
Status: in all modes

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig9

SHORTCUT: In Intercom mode pressing Control 2 times activates/deactivates the music.

TO OPEN/CLOSE UNIVERSAL INTERCOMBluetooth
Status: Intercom mode

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig10

Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call 2 times)

SHORTCUT: In Phone/FM Radio modes pressing Control 2 times activates/deactivates Mesh communication.

PHONE MODE

FUNCTION DESCRIPTION

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig12

Note: If you have a phone paired with the Vol – button, use the Down button.

SHORTCUT: In Phone/FM Radio modes pressing the Down button 2 times turns the Intercom on/off.

ANSWERING/ENDING A CALL REJECTING A CALL

Status: Phone mode

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig15

Note: If you have a phone paired with the Vol – button, use the Down button.

MUSIC

Status: Phone mode

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig17

RADIO MODE

FUNCTION DESCRIPTION

MIDLAND BTRUSH Mesh and Bluetooth Conference -fig18

FM RADIO

Status: Radio mode

MIDLAND-icon8 x1
Press 1 time ON/OFF
MIDLAND-icon22 x1
Press 1-time Next station
3”
Press for 3 seconds Next preset
MIDLAND-icon10 x1
Press 1-time Previous station
3”
Press for 3 seconds Previous preset

Go to our website www.midlandeurope.com, download the complete manual and the BT Updater software.

Customize your intercom with the BTPRO SetApp. Download it here:

MIDLAND -qr

https://play.google.com/store/apps/details?id=com.midlandeurope.btsetapppro&hl=it&gl=US

MIDLAND -qr1

https://apps.apple.com/it/app/btpro-setapp/id1511695564

Documents / Resources

MIDLAND BTRUSH Mesh and Bluetooth Conference System [pdf] User Guide
BTRUSH, Mesh and Bluetooth Conference System
MIDLAND BTRUSH Mesh and Bluetooth Conference System [pdf] User Guide
BTRUSH, Mesh and Bluetooth Conference System, Bluetooth Conference System, Mesh Conference System, Conference System

References

Leave a comment

Your email address will not be published. Required fields are marked *