141078192 Microtech Wireless Double Force Caliper Microtech

Specifications

• Brand: MICROTECH
• Website: www.microtech.tools
• IP Rating: IP67
• Origin: Swiss
• Features: Wireless, Double Force, Calibration ISO 17025:2017, ISO 9001:2015

Product Usage Instructions

Caliper Range and Resolution

The caliper is available in various ranges (mm and inch) with corresponding resolutions as follows:

Item No	Range	Resolution	Accuracy*	Double Force (N)	Jaws	Protection

Battery Replacement

If the display blinks or is absent, follow these steps for battery replacement:

1. Open the battery cover.
2. Insert a CR2032 battery with correct polarity.
3. Close the cover.

Measuring Procedures

External Measuring with Force 8N

1. Contact external jaws to each other for zero setting.
2. Push Force roll up to double-lines on the left side.

Internal Measuring with Force 4N:

1. Contact internal jaws inside the setting ring.
2. Preset the setting ring size on the caliper.
3. Push Force roll up to right lines on the Force indicator and
   press SET button for 2 seconds.

Power Consumption Modes

• WIRELESS OFF
• WIRELESS TO MDS
• STANDARD ECO (GATT)
• WIRELESS HID
• WIRELESS HID+MAC

Frequently Asked Questions (FAQ):
Q: How do I connect the caliper wirelessly to the MDS app?
A: Switch on the wireless module by pressing the button for 2 seconds. In the WIRELESS TO MDS mode, the display will blink until it connects to the MDS app. You can then select STANDARD or ECO sub-mode for data transfer.

WIRELESS DOUBLE FORCE CALIPER MICROTECH

USER MANUAL

WIRELESS DOUBLE FORCE caliper IP67

Item No	Range		Resolution	Accuracy*	Double force	Display	Protection	Carbide jaws	Wireless data output
	mm	inch	mm	μm	N
141078192	0-150	0-6”	0,01	±10	8 ext 4 int	Swiss Digit height 11mm	IP-67		•
141078192C								•	•
141078292	0-200	0-8”		±10					•
141078229C								•	•
141078392	0-300	0-12”		±20					•
141078329C								•	•

MICRON WIRELESS DOUBLE FORCE caliper IP67

Item No	Range		Reso- lution	Accu- racy*	Double force	Jaws	Protection	Preset	mm/inch	Auto on/off	WIRELESS
	mm	inch	mm	μm	N	mm
141079192	0-150	0-6”	0,001	±5	8 ext 4 int	40/16	IP-67	•	•	•	•
141079292	0-200	0-8”		±8		50/17		•	•	•	•
141079392	0-300	0-12”		±10		60/20		•	•	•	•

*MAX ERROR FOR INTERNAL END DEPTH MEASUREMENTS DIN-862

INSTRUMENT FIGURE

BUTTONS

BATTERY REPLACEMENT
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.

DOUBLE FORCE CONTROL MEASURING

EXTERNAL MEASURING with FORCE 8N

ZERO SETTING FOR EXTERNAL

•  Contact external jaws to each other
• Push Force roll up to double-lines comes left on Force indicator and press SET button 2s.

EXTERNAL MEASURING

• When double-lines on Force indicator in left position – Measuring Force on External jaws 8±2N.

INTERNAL MEASURING with FORCE 4N PRESET INTERNAL VALUE

• Contact internal jaws inside setting ring
• PRESET setting ring size on caliper
• Push Force roll up to right lines on Force indicator and press SET button 2s.

INTERNAL MEASURING

• When double-lines on Force indicator in right position – Measuring Force on Internal jaws 4±1N.

CORRECT MEASURING

POWER CONSUMPTION

MODE		TRANSFER DATA
WIRELESS OFF		45 μA
WIRELESS TO MDS	STANDARD	2.0 mA
	ECO (GATT)	45-100 μA
WIRELESS HID		0.4 mA
WIRELESS HID+MAC		0.4 mA

WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces;
Measuring the size of object in the process of machining;
Shocks or dropping, avoid bending of rod or other surfaces.

WIRELESS TO MDS APP CONNECTION

• SWITCH ON WIRELESS module push button 2 sec;
• In WIRELESS TO MDS non-stop blinking on display up to connection to MDS app and selecting STANDARD or ECO sub-mode.
• In STANDARD submode data transfer 4 times/sec and all time on display.
• Push button to save data to MDS app or use buttons and Timer inside app.
• In ECO (GATT) submode caliper ready to transfer data any time with no indication.
• Push button to save data on MDS app.

ECO mode recomended for battery economy

WIRELESS DATA TRANSFER CONNECTION
DOWNLOAD MICROTECH MDS APP Link to to Download MICROTECH MDS app for Windows, Android, iOS, MAcOS on www.microtech.tools

 

WIRELESS HID CONNECTION

• For selecting next mode push5 sec.
• WIRELESS HID and WIRELESS HID+MACblinking 2 sec on display and will be ready for searching on Tablet, Smartphone or Computer Bluetooth connections.
• After succesfull connection save data to customers app with push button.
• You can easily identify the current mode by searching for WIRELESS devices, where the device name will indicate the mode, either MICROTECH HID or MICROTECH HID + MAC.

NOTICE:
Always remember to disconnect and remove the device from your Bluetooth settings before changing modes to avoid conflicts and ensure a smooth transition.

WIRELESS DATA TRANSFER MODES

MICROTECH caliper with Built-in Wireless data output module for transfer results

VIDEO MANUAL
Video manual with Connection on MICROTECH YouTube https://www.youtube.com/@Microtech-Instrumentsor by QR code scanning

INDUSTRY 4.0 INSTRUMENTS

MICROTECH
innovative measuring instruments
61001, Kharkiv, Ukraine, str. Rustaveli, 39
tel.: +38 (057) 739-03-50
www.microtech.ua
tool@microtech.ua

Change without prior notice

Documents / Resources

MICROTECH 141078192 Microtech Wireless Double Force Caliper Microtech [pdf] User Manual 141078192, 141078292, 141078392, 141079192, 141079392, 141078192 Microtech Wireless Double Force Caliper Microtech, 141078192, Microtech Wireless Double Force Caliper Microtech, Wireless Double Force Caliper Microtech, Double Force Caliper Microtech, Force Caliper Microtech, Caliper Microtech, Microtech

References

• User Manual