microtech 141078192 Wireless Double Force Caliper

Product Information

The MICROTECH Wireless Double Force Caliper is a precision measuring tool designed for accurate external and internal measurements. It features a range of 0-150mm (0-6 inches) with a resolution of 0.01mm (0.0004 inches) and an accuracy of ±8N for external measurements and ± 4N for internal measurements. The caliper is equipped with carbide jaws for durability and has a Swiss digit display with a height of 11mm. It is IP-67 rated for protection against dust and water.

Key Features:

• Range: 0-150mm (0-6 inches)
• Resolution: 0.01mm (0.0004 inches)
• Accuracy: ±8N (external), ±4N (internal)
• Carbide jaws
• Wireless data output
• IP-67 protection

MODIFICATIONS

Item No	Range		Resolution	Accuracy*	Double force	Display	Protection	Carbide jaws	Wireless data output
	mm	inch	mm	μm	N
141078192	0-150	0-6”	0,01	±10	8 ext 4 int	Swiss Digit height 11mm	IP-67		•
141078192C								•	•
141078292	0-200	0-8”		±10					•
141078229C								•	•
141078392	0-300	0-12”		±20					•
141078329C								•	•

*MAX ERROR FOR INTERNAL END DEPTH MEASUREMENTS DIN-862

INSTRUMENT FIGURE

RANGE	DIMENSIONS						Display	Protection
	A	B	C	D	E	G
	mm	mm	mm	mm	mm	mm		IP
0-150	235	40	10	16	16	4×1,4	Swiss Digit height 11mm	IP-67
0-200	290	50	10	18	16	4×1,4
0-300	395	60	11	21	16	4×1,4

BUTTONS

DOUBLE FORCE CONTROL MEASURING

• EXTERNAL MEASURING with FORCE 8N
  • ZERO SETTING FOR EXTERNAL
    • Contact external jaws to each other
    • Push Force roll up to double-lines comes left on Force indicator and press SET button 2s.
  • EXTERNAL MEASURING
    • When double-lines on Force indicator in left position – Measuring Force on External jaws 8±2N.
• INTERNAL MEASURING with FORCE 4N
  • PRESET INTERNAL VALUE
    • Contact internal jaws inside setting ring
    • PRESET setting ring size on caliper
    • Push Force roll up to right lines on Force indicator and press SET button 2s.
  • INTERNAL MEASURING
    • When double-lines on Force indicator in right position – Measuring Force on Internal jaws 4±1N.

BATTERY REPLACEMENT
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.

CORRECT MEASURING

WIRELESS DATA TRANSFER MODES

MICROTECH caliper with Built-in Wireless data output module for transfer results.

WIRELESS DATA TRANSFER CONNECTION

• SWITCH ON WIRELESS module push button 2 sec;
• In WIRELESS TO MDS non-stop blinking on display up to connection to MDS app and selecting STANDARD or ECO sub-mode.
• In STANDARD submode data transfer 4 times/sec and all time on display.
• Push button to save data to MDS app or use buttons and Timer inside app.
• In ECO (GATT) submode caliper ready to transfer data any time with no indication.
• Push button to save data on MDS app.
• For selecting next mode push 5 sec.
• WIRELESS HID and WIRELESS HID+MAC blinking 2 sec on display and will be ready for searching on Tablet, Smartphone or Computer Bluetooth connections.
• After succesfull connection save data to customers app with push button.

POWER CONSUMPTION

MODE		TRANSFER DATA
WIRELESS OFF		45 μA
WIRELESS TO MDS	STANDARD	2.0 mA
	ECO (GATT)	45-100 μA
WIRELESS HID		0.4 mA
WIRELESS HID+MAC		0.4 mA

DOWNLOAD MICROTECH MDS APP
Link to to Download MICROTECH MDS app for Windows, Android, iOS, macOS on www.microtech.tools

VIDEO MANUAL
Video manual with Connection on MICROTECH YouTube https://www.youtube.com/@Microtech-Instrumentsor by QR code scanning.

www.microtech.tools

Documents / Resources

microtech 141078192 Wireless Double Force Caliper [pdf] User Manual 141078192 Wireless Double Force Caliper, 141078192, Wireless Double Force Caliper, Double Force Caliper, Force Caliper

References

• User Manual