X75 V2 Keyboard Handy Guide
A: Type-C Port
B: MODE SWITCH
1. The top position is for 2.4G mode.
2. The middle position is for Wireless mode.
3. The bottom position is for Wired mode.
C: RGB status Light / Battery Indicator Light
D: Metal Magnetic Nameplate Hidden Storage for USB Dongle
E: Multimedia knob
Slide Up to Volume Up
Slide Down to Volume Down
+2.4G WIRELESS CONNECTION
1 
→ 2 
→ 3 
- Switch the toggle to [2.4G] to enter the 2.4G mode.
- Take out the USB dongle from the dongle slot.
- Insert the USB dongle into the USB port of the computer.
WIRELESS CONNECTION
1 
→ 2 
→ 3 
- Switch the toggle to [B] to enter the wireless mode.
- Press and hold [FN + 1] to start pairing; the indicator light will flash quickly to activate wireless pairing.
- • Search for the wireless device name [MCHOSE X75 V2 3.0] or [MCHOSE X75 V2] on your device, and click to connect, the wireless indicator light will go back to normal after successful pairing.
Note: Wireless 2 and Wireless 3 are connected in the same way as Wireless 1. Press the key [FN+2@) to switch to Wireless 2. Press the key [FN+3#] to switch to Wireless 3; When connecting, the blue light flashes slowly.
WIRED CONNECTION
1 
→ 2 
→ 3
- Switch the toggle to [OFF] to enter the wired mode.
- Connect the cable to the Type-C port of the keyboard.
- Connect the cable to the USB port of the computer. The keyboard is ready to use.
SYSTEM MODE SWITCH
Android
Win
Mac
BACKLIGHT SETTING
Switch backlight mode
Switch backlight color
Backlight brightness +
Backlight brightness –
Backlight speed-
Backlight speed +
STATUS LIGHT SETTING
Switch status light mode (left Shift)
Switch status light color
Switch status light to battery mode
SIDE LIGHT SETTING
Side light mode switch (right Shift)
Cycle switch side light brightness (right Alt)
Cycle switch side light speed (right Ctrl)
Switch side light color
Scan the QR code to view the electronic manual ⇒
Documents / Resources
 |
MCHOSE X75 V2 Keyboard [pdf] User Guide X75 V2 Keyboard, X75, V2 Keyboard, Keyboard |
