IVY 3
Assembly Instructions
Scan the OR code to view the assembly video or go to maupets.com/pages/assembly
| Label | Shape | Description | Quantity |
| A |  |
Lower branch | 1 |
| B |  |
Upper branch | 1 |
| C |  |
Tool | 1 |
| D |  |
Base | 1 |
| E |  |
Basket | 3 |
| F |  |
Cushion | 3 |
| G |  |
Fluffy disc | 1 |
| H |  |
D 10x25mm bolt | 3 |
| I |  |
D 10x80mm bolt | 4 |
| J |  |
Double-sided screw | 1 |
| K |  |
Small washer | 4 |
USE TOOL (C) TO ASSEMBLE
QUESTIONS?
Contact support at info@maupets.com
STEP 1-A
Align the lower branch (A) with the 4 holes on the base (D). Ensure the logo is facing forward, and the first arm is facing left.
STEP 1-B
Put the bolt (I) through the small washers (M) and insert them from the bottom of the base. Tighten the screws into the lower branch using the included tool (C).
- LOWER BRANCH (A)
- BASE (D)
STEP 2-A
Screw the double-sided screw (J) into the top of the lower branch and then place the fluffy disc (G) on top of it.
- FLUFFY DISC (G)
- DOUBLE- SIDED SCREW(J)
STEP 2-B
May require two people
Grab the upper branch (B) and screw/twist it into the lower branch (A). Try to keep the branch as staight as possible.
- UPPER BRANCH (B)
- FLUFFY DISC (G)
- LOWER BRANCH (A)
STEP 3
Use the screws (H) to attach the baskets onto the arms and use the tool (C) to tighten them. Place the cushions (F) inside of the baskets.
A1: Tighten the screws with tool (C).
- CUSHION (F)
- TOOL (C)
- BASKET (E)
Documents / Resources
 |
Mau IVY3 3 Cat Tree [pdf] Instruction Manual IVY3, IVY3 3 Cat Tree, 3 Cat Tree, Tree |
