IVY 3

Assembly Instructions

Scan the OR code to view the assembly video or go to maupets.com/pages/assembly

Label	Shape	Description	Quantity
A		Lower branch	1
B		Upper branch	1
C		Tool	1
D		Base	1
E		Basket	3
F		Cushion	3
G		Fluffy disc	1
H		D 10x25mm bolt	3
I		D 10x80mm bolt	4
J		Double-sided screw	1
K		Small washer	4

USE TOOL (C) TO ASSEMBLE

QUESTIONS?
Contact support at info@maupets.com

STEP 1-A
Align the lower branch (A) with the 4 holes on the base (D). Ensure the logo is facing forward, and the first arm is facing left.

STEP 1-B
Put the bolt (I) through the small washers (M) and insert them from the bottom of the base. Tighten the screws into the lower branch using the included tool (C).

1. LOWER BRANCH (A)
2. BASE (D)

STEP 2-A
Screw the double-sided screw (J) into the top of the lower branch and then place the fluffy disc (G) on top of it.

1. FLUFFY DISC (G)
2. DOUBLE- SIDED SCREW(J)

STEP 2-B
May require two people

Grab the upper branch (B) and screw/twist it into the lower branch (A). Try to keep the branch as staight as possible.

1. UPPER BRANCH (B)
2. FLUFFY DISC (G)
3. LOWER BRANCH (A)

STEP 3
Use the screws (H) to attach the baskets onto the arms and use the tool (C) to tighten them. Place the cushions (F) inside of the baskets.

A1: Tighten the screws with tool (C).

1. CUSHION (F)
2. TOOL (C)
3. BASKET (E)

Documents / Resources

Mau IVY3 3 Cat Tree [pdf] Instruction Manual IVY3, IVY3 3 Cat Tree, 3 Cat Tree, Tree

References

• User Manual