matt E ARD-1-32-TP-R EV Connection Unit
Product Usage Instructions
- Installation:
- Ensure the power supply is switched off before installation. Connect the unit to the power source according to the provided cable entry facility. Make sure the terminal connections are secure.
- Load Connection:
- This unit is suitable for a 1 x 32A TPN load. Connect the load securely to the terminal capacity specified (25mm2).
- Auto Reset Function:
- The ARD connection center features a unique 5-pole auto reset device. In case of a fault, the device automatically restores power to the load once the fault has cleared.
- Maintenance:
- Regularly check the unit for any signs of damage or wear. Clean the enclosure as needed to maintain proper functioning.
Product Information
The matt:e ARD connection centers provide a simple-to-install dedicated EV connection center, with built-in O-PEN® technology, that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes.Helping to facilitate compliance with BS:7671. 2018 Amendment 1, 2020 Regulation 722.411.4.1.(iii). The matt:e ARD connection centres incorporate the unique 5 pole auto reset device that automatically restores power to the load once the fault has cleared.
Product Features and Benefits
- Built-in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundwork
- Removes the risk of striking buried services
- Simple wire in wire out cthe connection
- Phase loss protection
- 32A 30mA TPN Type A RCBO
- For 1 x 32A TPN load
- Mild steel IP4X enclosure
- Standard 1-year parts warranty.
Specifications
| Specifications | |
| Input Volts | 400V 50Hz |
| Max Load | 32amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 380mm x 300mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
Contact
- T: 01543 227290
- E: info@matt-e.co.uk
- W: www.matt-e.co.uk
- Matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
FAQ
- Q: What is the purpose of the auto-reset isolator in this unit?
- A: The auto reset isolator automatically restores power to the load after a fault is cleared, ensuring continuous operation.
- Q: Can this unit be used for EV connection?
- A: Yes, this unit is designed to simplify EV connection processes, making it suitable for electric vehicle charging applications.
Documents / Resources
 |
matt E ARD-1-32-TP-R EV Connection Unit [pdf] Owner's Manual ARD-1-32-TP-R, ARD-1-32-TP-R EV Connection Unit, ARD-1-32-TP-R, EV Connection Unit, Connection Unit |
