masayaCo 2110 Granada Rectangular Dining Table

INTRODUCTION

• Thank you for supporting our mission to create a greener planet through reforestation. Before starting, please make sure all pieces listed in this manual are complete. Save this manual for future reference.
• When assembling, we recommend placing all wooden parts on a soft, clean, and flat surface to avoid scratches and damage while assembling your brand new MasayaCo piece.
• 30 Min
• 2 people
• Allen Hex Key

Parts Description

Installation Steps

1. Step 1
   • Lay out Pieces 1 and 2 face down on an elevated and soft surface.
2. Step 2
   • Place the threaded studst in the hole on the side of the legs and rotate until it is well adjusted
   • Step 2
   • Secure the legs in place by screwing pieces 3 with the Allen Hex Key
3. Step 3
   • Place the legs on the tabletop and attach them by using Pieces 5. To screw this in place please use the curve washers and the wrench to adjust.

Need any assistance?

• Feel free to contact our Customer Service Team. 6159539373,
• customerservice@masayacompany.com, or using our chat on www.masayacompany.com

Documents / Resources

masayaCo 2110 Granada Rectangular Dining Table [pdf] Installation Guide 2110 Granada Rectangular Dining Table, 2110, Granada Rectangular Dining Table, Rectangular Dining Table, Dining Table, Table

References

• User Manual