INSTRUCTION
MANUAL
NOTICE
Do not overtighten screws. (Insert all screws before tighten screws.)
- Please do not exceed the weight limitations of this item.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and nuts before use.
- Reconfirm that all bolts, screws, and nuts are secure every 90 days.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- Please adjust the speed slowly when you use electric drill for assembling to avoid screw slippage.
TOOLS REQUIRED
HARDWARE
PARTS
PRODUCT ASSEMBLY-OVERALL VIEW
- Look at the following overall view of this table and the exact position of each parts to be assembled.
PRODUCT ASSEMBLY
- Attach part B Table Bottom Feet to part C Table Leg with 16 pcs of Hardware 1 Bolt
- Attach part D Side Rail between 2 pcs of part C Table Leg with 16pcs of Hardware 3 Bolt.
- Attach part C Table Leg to part A Table Top with 16 pcs of Hardware 2 Bolt. 4 Nut and 5 Wahser.
- Check and tighten all the bolts and screws again and finish the assembly. Remark: Please remove the umbrella hole cover when you insert the umbrella!
Laguna 37“ X 71” Rectangular Dining Table
SKU:OP8006
V 1.0
Documents / Resources
 |
Laguna OP8006 Rectangular Dining Table [pdf] Instruction Manual OP8006, Rectangular Dining Table, OP8006 Rectangular Dining Table, Dining Table, Table |
