Original IoT Devices Manufacturer | MOKO SMARTOriginal IoT Devices Manufacturer | MOKO SMARTOriginal IoT Devices Manufacturer | MOKO SMART
User Manual for MOKO SMART models including: LW009-SM, LW009-SM Lorawan Parking Sensor, LW009-SM, Lorawan Parking Sensor, Parking Sensor, Sensor
LW009-SM Lorawan Parking Sensor - CHOOVIO IoT Solutions
File Info : application/pdf, 13 Pages, 623.86KB
DocumentDocumentLW009-SM User Manual Version 1.0 Version 1.0 MOKO TECHNOLOGY LTD. www.mokosmart.com CONTENT 1 Overview ...........................................................................................................................................3 2 Product Features...............................................................................................................................3 3 Main Function ...................................................................................................................................3 4 Application Scenarios........................................................................................................................3 5 Product Specifications.......................................................................................................................4 6 Product Appearance .........................................................................................................................5 7 Working Principle..............................................................................................................................5 8 Installation Guide ..............................................................................................................................5 8.1 Installation Preparation .........................................................................................................5 8.2 Installation Steps....................................................................................................................6 9 Quick Start Guide ..............................................................................................................................8 9.1 Register the Device on Network Server.................................................................................8 9.2 Activate the Device ..............................................................................................................10 10 Maintenance Instruction...............................................................................................................12 11 Revision History.............................................................................................................................12 1 Overview LW009-SM LW009-SM wireless surface-mounting vehicle detector is a wireless sensor that meet LoRaWAN long-distance wireless standard, it integrated with geomagnetic sensor and microwave radar sensor. Using effective dual-mode joint algorithm, the detector realizes precise parking spot detecting function and can be widely used in intelligent traffic, smart community, smart parking and other applications. It is compatible with LoRaWAN protocol, can communicate with gateway which compatible with LoRaWAN protocol. The data collected by the detector and transferred to application platform can be explained, detailed information please refer to LW009-SM application protocol. 2 Product Features High detection precision, adjustable detection threshold Build-in intelligent procession, Automatic drift compensation, stable and reliable performance Long wireless transmission distance Transmission parameters can be set optional Parameters can be configured by app via Bluetooth Low power consumption, long battery life Compact size, easy to install In built Temperature and Humidity sensor to measure if the road is frozen Optional - External mounting cradle available for using glue to mounting the unit on the road to avoid drilling hole Optional - Reflective warning stickers to increase the visibility of the sensor to avoid any inattention accident happen 3 Main Function Report parking state timely Low power prompt Detector failure alarm Report working states regularly OTA supported via Bluetooth Support reset and calibration automatically or manually 4 Application Scenarios 3 www.mokosmart.com Industrial parks On road parking space Commercial parking slot Other public parking slot LW009-SM Note: The strong magnetic field or the field where magnetic varies greatly are not suitable for the detector use. 5 Product Specifications Categories Parameter Value LoRa Wireless LoRa Protocol Specification Lora Frequency LoRaWAN V1.0.3 Class A EU868/AS923 Spreading Factor 125 kHz ~ 500 kHz Tx Power Max 17dBm Performance Specification Sensitivity LoRa Communication Distance Detection Accuracy Detection Algorithm Installation Method Upgrade Method -135 dBmSF12, 125KHz Up to 500m ~1000m (Depends on actual environment) >99% Dual mode -Three-axis joint detection algorithm and Radar Surface-Mounting Type Remote Wireless upgrade State Monitor Power Supply Low voltage alarm, hardware error alarm, Strong magnetic disturbance alarm Built-in 3.6V Lithium battery, 20Ah Bluetooth switch Magnetic trigger Life Duration 5 years under typical scenarios Physical Specification Protection level Dimension IP68 : 202mm, H: 30mm Weight 600g Force Resistance 10 tons Application Specification Power Switch Wake-up via Bluetooth Operation Temperature/ -40 ~ 85 Storage Temperature Operation Humidity 10%~90% 4 www.mokosmart.com LW009-SM Operating Environment No ferromagnetic materials, No strong magnetic Requirement field nearby; No metal shield covers the detector Note: Typical scenario means the device report information every 12 hours, there are 5 times for vehicles come in and go out to a parking space a day. 6 Product Appearance 7 Working Principle The frame and shell of a car are made of ferromagnetic material (various types of steel), which will make disturbance to surrounding magnetic field. According to this characteristic, LW009-SM determines whether there is a car in the parking space. With build-in dual-sensors (geomagnetic sensor and microwave radar sensor), powerful signal analysis and processing algorithm. The product can work out redundant enhanced information, especially acquire complementary and optimization to the reverse sensitivity characteristic s of chassis with different height. Compared to traditional parking sensor with single sensor, LW009-SM greatly improved the detection accuracy and reduced information loss. 8 Installation Guide 8.1 Installation Preparation 5 www.mokosmart.com LW009-SM 1.Please try to install the device on the daytime and finish the installation as soon as possible. 2.Please pay attention to road safety and wear reflective clothes for safety. 3.Installation Tool Preparation: Ruler: Measure the installation position Marking pen: mark the installation position Coring bit Blower: blow away the powder 4. Product installation orientation requirements The direction of the arrow above the device should be at 90 degrees angle to the front of the vehicle, as shown in following figure, both mounting directions are recommended. Geomagnetic The detector must be installed in the required direction, otherwise there may be a possibility of false alarms. 8.2 Installation Steps Step 1: Product Check Take out the product and make sure appearance is not damaged. Check if the label pastes tight on the product and label information (include the DevEUI and other parameters which used to device registration) is clear. Step 2: Drill Hole 6 www.mokosmart.com Find and mark the center of the desired detector location. LW009-SM Drill four holes (Depth: around 60 mm; Diameter: around 8 mm) into the road. Step 3: Install Expansion Bolts Install the four expansion bolts separately to the device. Step 4: Place the Device Place the LW009-SM face up with the 4 expansion bolts aligned with the 4 mounting holes in Figure 3. Press the 4 expansion bolts into these 4 mounting holes so that the bottom surface of the LW009-SM is tight against the road surface and there is no gap between the underside of the bolt cap and the device, then lock the bolts with an Allen screwdriver. 7 www.mokosmart.com LW009-SM 9 Quick Start Guide To facilitate the configuration and use of the LW009-SM, the product can be configured and calibrated using the corresponding configuration APP (Moko will provide APK of configuration APP). Note: After the successful installation of the APP, the APP will request some mobile phone permissions, such as Bluetooth access permissions. Please click "OK", otherwise the APP will not work well. 9.1 Register the Device on Network Server The TTN server is used here as an example Step 1: The LoRaWAN mode of LW009-SM is OTAA mode in default. MOKO will provide the LoRaWAN access parameters, which includes DEVEUI, DEVADDR, AppSkey and NwkSKey. Stpe2: Open TTN page, then register the applications Step 3: Click "Add end device" on application page. 8 www.mokosmart.com LW009-SM And select "Manually" on register interface. Then select the corresponding frequency band, choose ABP mode on activation mode and the LoRaWAN version is V1.0.3. Note: If you use EU868, pls select Europe 863-870 MHz (SF12 for RX2). Step 4: According to the information obtained from Step1, fill in the corresponding LoRaWAN access parameters. 9 www.mokosmart.com LW009-SM Step 5: Click "Register end device" on the bottom of page. 9.2 Activate the Device Step 1: Turn on phone's Bluetooth function Step 2: Open the configuration app "Moko Parking Sensor Configure Tools" and come into detector tool interface 10 www.mokosmart.com LW009-SM Step3: Place the magnet stripe (Put together with mounting screws in the box with the device) in the groove at the top of the device and stay for 1~5seconds, then move away and click "Connected Device" of configuration app at the same time. Step 4: After Click "Connected Device". If connect successfully, the device's basic information will be displayed in APP interface. Step 5: Select "Auto Install", the device will wake up and do the calibration automatically, the system time will be synchronized. The device mode will be Normal Mode. Note: make sure there are no vehicle and other metal material within1 meter around the device or calibration will make error before "Auto Install". Note: The device can be calibrated again by click "Auto Install" again. 11 www.mokosmart.com 10 Maintenance Instruction LW009-SM 1. Battery life: The battery life refers to the service life under normal conditions. When the device is used in poor LoRa network (SNR-12), the device function will be affected and the battery life will be shortened. Note: Normal conditions means that the device can work normally most of the time and the wireless communication is stable. 2. Make sure that there are no vehicle and other metal material within 1 meter around the device during the calibration process, otherwise calibration will make error. 3. When the server sends calibration command to device, make sure there are no vehicle in the parking space, otherwise calibration will make error. 4. When the device works abnormally, the device can be reset through LoRaWAN downlink command. 5. If device cannot connect by blue-tooth, please try to change a magnetic stripe. 6. Re-calibration is needed once the device is moved during detecting. 11 Revision History Version 1.0 Description Initial version Editor Allen Date 2022-4-20 12 www.mokosmart.com LW009-SM MOKO TECHNOLOGY LTD. 4F,Buidling2, Guanghui Technology Park, MinQing Rd, Longhua, Shenzhen, Guangdong, China Tel:86-755-23573370-829 Support_lora@mokotechnology.com https://www.mokosmart.com