Part No. DXMA1902091A © 2022 Stanley Black & Decker, Inc.
FCC ID: 2ADH6-1902091D
DID: D058328
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DEWALT® and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools & accessories.
Manufactured by E-filliate Inc.
11321 White Rock Rd.
Rancho Cordova, CA 95742 USA
If you have questions or comments, contact us.
888-480-9885
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
⚠ DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
⚠ WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
⚠ CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
⚠ NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS PRODUCT, CALL US TOLL FREE AT 888-480-9885.
⚠ WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
Thank you for purchasing the Jobsite Pro Wireless Earphones. These earphones allow the user to listen to audio wirelessly from up to 33 feet from a paired phone or tablet.
Make sure the earphones are fully charged before using them for the first time. See "Charging Procedure” for instructions.
The battery is not fully charged out of the carton. Before using the earphones, read the safety instructions below and then follow the charging procedures outlined.
⚠ Caution: Always replace port cover after charging.
⚠ WARNING: Shock hazard. Don't allow any liquid to get inside the earphones. Electric shock may result.
⚠ WARNING: Burn hazard. Do not submerge the earphones in any liquid or allow any liquid to enter the earphones. Never attempt to open the earphones for any reason. If the plastic housing of the earphones breaks or cracks, return it to a service center for recycling.
Note that the Jobsite Pro Wireless Earphones can pair to a max. of 2 devices. If you experience difficulty pairing a new device, remove a pairing connection from an existing device.
In case of product failure, E-filliate Inc. will issue a replacement. Customers should NOT RETURN PRODUCT TO STORE. Instead, please call 888-480-9885, 8:00 a.m.-5:00 p.m. PT, Monday - Friday, or e-mail using dewaltinfo@efilliate.com.
Products improperly used, abused or altered are not covered under policy.
E-filliate Inc. is available to help. If a problem arises with this product or there are questions on how to use it, customers should contact E-filliate Inc. directly. There is no need to contact the retailer where the product was purchased. Customers should contact one of the service representatives, using the contact info listed above, before shipping merchandise to E-filliate Inc. Please provide the product number, DXMA1902091, when contacting E-filliate Inc.
11321 White Rock Road
Rancho Cordova, CA 95742 USA
Any controversy or claim against E-filliate Inc. and/or Affiliated Entities shall be settled by arbitration administered by the American Arbitration Association (“AAA”) in accordance with its Consumer Arbitration Rules (“AAA Rules”). Unless otherwise agreed, any arbitration hearing(s) will take place in the city and state in which the customer resides. Judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction thereof.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Warning:
Changes or modifications made to this device not expressly approved by E-filliate Incorporated may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
RF exposure statement:
The device compliance RF exposure requirement and can be installed and used without restriction.
![]() |
DEWALT Jobsite Wireless Earphones DXMA1909935 User Manual User manual for DEWALT Jobsite Wireless Earphones (DXMA1909935), providing detailed instructions on safety, operation, charging, pairing, and warranty. |
![]() |
DEWALT Jobsite Pro Wireless Earphones DXMA1902091 User Manual User manual for DEWALT Jobsite Pro Wireless Earphones (DXMA1902091). Provides safety guidelines, operating instructions, charging, pairing, controller functions, warranty, and customer service information. |
![]() |
DeWALT Jobsite Pro Wireless Earphones Safety Recall Safety recall notice for DeWALT Jobsite Pro Wireless Earphones due to overheating hazard. Affected models and contact information for free replacement are provided. |
![]() |
DeWalt TWS 209A True Wireless Earbuds Quick Start Guide and Specifications Learn how to pair and use your DeWalt TWS 209A True Wireless Earbuds. This guide includes quick setup instructions, technical specifications for the earbuds and charging case, and compliance information. |
![]() |
DEWALT Jobsite Pro-X1 True Wireless Earbuds Instruction Manual Comprehensive instruction manual for DEWALT Jobsite Pro-X1 True Wireless Earbuds with Charging Case, covering setup, controls, safety, and technical specifications. |
![]() |
DEWALT Bluetooth Neckband Earphones Agent Authorization by E-filliate Incorporated Agent Authorization document from E-filliate Incorporated for DEWALT Bluetooth Neckband Earphones, authorizing MiCOM Labs Inc. for certification processes. Includes product details and contact information. |
![]() |
DEWALT Jobsite Pro-X2 ANC True Wireless Earbuds with Charging Case - Instruction Manual Comprehensive instruction manual for the DEWALT Jobsite Pro-X2 ANC True Wireless Earbuds with Charging Case (Model DXMA1902097). Learn about product features, package contents, component identification, getting started, pairing, controls, volume adjustment, call management, LED indicators, factory reset, technical data, safety instructions, storage recommendations, and warranty information. |
![]() |
DEWALT Bluetooth Neckband Earphones - EUT Constructional Details Detailed photographs and constructional overview of DEWALT Bluetooth Neckband Earphones (Model: 1902091B, 2ADH6-1902091B), as presented in a CTI test report. |