SONOFF Zigbee Smart Water Valve User Manual SWV(EN)

Introduction

A Zigbee Smart Water Valve powered by four AA batteries, which is easy and quick to install. You can remotely control and set scheduled irrigation, quantitative irrigation, intelligent scenes, and more through the APP to make the traditional irrigation system intelligent. It supports statistics of irrigation water consumption and allows viewing 6-month historical records at any time, helping you better manage water resources and save water bills.

• ? APP control
• ⏰ Timed watering
• ♻️ Cyclic irrigation

Key Features

• ? Water consumption statistics
• ? 6-month history
• ? Scene linkage

*The functional characteristics depend on the functionality of the Zigbee gateway.

Device Components and Indicators

A diagram illustrates the SONOFF Zigbee Smart Water Valve:

• ? Inlet
• ? Outlet
• ⚙️ Button:
  • Single press: Turn on/off the smart device.
  • Press and hold for 5 seconds: The device enters the pairing mode.
• ? LED indicator (Green):
  • Steady on: Normal connection with the gateway.
  • Slow flash: The device is in pairing mode.
  • Fast flash: Abnormal connection with the gateway.
• ? Battery slot

Compatible Voice Assistants

This device is compatible with:

• works with Google Home
• works with alexa

Specifications

Download the eWeLink App & Add SONOFF Zigbee Gateway

Please download the "eWeLink" App from ▶️ Google Play Store or ? App Store to manage your device.

Power On the Device

1. Hold both ends of the battery compartment cover and pull out the battery slot.
2. Install four AA batteries into the compartment.
3. Firmly press the battery slot back into the device until the snap at the arrow is visible.
4. After powering on, the button LED light will flash.

Add Device via App

1. Open the eWeLink app and enter "Scan" mode.
2. Scan the QR code located on the device.
3. Select "Add Device" in the app.
4. Press and hold the device's button for 5 seconds to enter pairing mode.
5. The LED indicator will flash slowly for approximately 180 seconds.
6. Select your Zigbee gateway from the list in the app.
7. Wait until the addition process is complete. The app will indicate when the device is found and connected.

Matched Gateways

Recommended SONOFF Gateway Models: ZBBridge-P (V2.0.0), NSPanel Pro (V3.3.0), iHost (V2.1.0), ZBBridge-U (soon to be supported).

Note: Before adding a device, please upgrade your gateway firmware to the above version or the latest version.

Other Compatible SONOFF Gateway Models: ZBDongle-P, ZBDongle-E.

Third-Party Compatible Gateway Models: Amazon Gateway Model: Echo Plus 2nd, Echo Show 2nd, Echo 4th Gen.

*Other gateways supporting ZigBee3.0 wireless protocol are also compatible. Detailed information is in accordance with the final product.

Installation

1. Wrap thread seal tape (? tape) around the thread of the faucet (? faucet).

2. Screw the water inlet (? inlet) nut of the equipment onto the faucet.

3. Test for leaks. If there are no leaks, proceed to the next step.

4. Connect the hose to the water outlet (? outlet) of the equipment. If the water outlet leaks, wrap thread seal tape around its thread.

Recommendation: It is recommended to install vertically, as horizontal installation may increase the error in flow rate measurement.

Communication Distance

The maximum communication distance of this device is 130M (open space).

FCC Compliance Statement (?? FCC)

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Notice (?? ISED)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003(B). This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

French translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la Classe B conforme à la norme NMB-003(B) du Canada. Cet appareil est conforme à la norme RSS - 247 d'Industrie Canada. Le fonctionnement est soumis à la condition que cet appareil ne provoque pas d'interférences nuisibles.

ISED Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

French translation: Cet équipement est conforme aux limites d'exposition aux rayonnements de la ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et fonctionner à au moins 20cm de distance d'un radiateur ou de votre corps. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.

SAR Warning

Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.

French translation: Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.

WEEE Disposal and Recycling Information (♻️ WEEE)

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

French translation: Cet appareil et ses accessoires se recyclent. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil!

EU Declaration of Conformity (?? EU Declaration)

Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type SWV-NH, SWV-BSP is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/

For CE Frequency

• EU Operating Frequency Range: Zigbee: 2405–2480 MHz
• EU Output Power: Zigbee ≤10dBm

CE Frequency Table

RACCOLTA DIFFERENZIATA (Separate Collection)

Italian text: Verifica le disposizioni del tuo Comune. Separa le componenti e conferiscile in modo corretto. (Verify your Municipality's provisions. Separate components and dispose of them correctly.)

Cautions

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• Do not short-circuit batteries.
• Do not use new and old batteries together.
• Do not use batteries of different types/manufacturers together.
• Do not use batteries in reverse polarity.
• A battery which is leaking or has leaked before is not fit for use and should be thrown away. Place the batteries into a plastic bag, without touching the batteries, put on gloves and an apron, and then put it into a recycling box at an electrical store.
• When the battery which is leaking or has leaked before, in some cases, the circuit board of your device may be damaged and will no longer work. In that cases, you should take your device to a Recupel collection point and the battery to a Bebat collection point.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Company Information

Shenzhen Sonoff Technologies Co., Ltd.

3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China

ZIP code: 518000

Service email: support@itead.cc

Website

Website: sonoff.tech MADE IN CHINA