SONOFF Zigbee Smart Water Valve User Manual
Introduction
The intelligent Zigbee water valve is powered by four AA batteries and is easy and quick to install. You can remotely control and set scheduled watering, quantitative watering, smart scenes, etc., through the APP, making the traditional irrigation system intelligent. It supports water consumption statistics for watering, and you can view 6-month historical records at any time, helping you better manage water resources and save on water bills.
? APP Control
⏰ Timed Watering
? Cyclic Watering
Key Features
- ? Water Usage Statistics
- ? 6-Month History
- ? Scene Linking
*Functional characteristics depend on the Zigbee gateway functionality.
Device Overview
Image of the SONOFF Zigbee Smart Water Valve, a compact, dark-colored device with a visible valve mechanism and battery compartment.
Components:
- Inlet: [Water Inlet]
- Outlet: [Water Outlet]
- Button: [Button]
- Single press: Turn the smart device on/off.
- Press and hold for 5 seconds: The device enters pairing mode.
- LED Indicator (Green):
- Solid: Normal connection to the gateway.
- Slow blinking: Device is in pairing mode.
- Fast blinking: Abnormal connection to the gateway.
- Battery Slot: [Battery Slot]
Compatible Voice Assistants
The SONOFF Zigbee Smart Water Valve is compatible with:
- Google Home
- Amazon Alexa
Specifications
| Parameter | Value |
|---|---|
| Model | SWV-NH, SWV-BSP |
| MCU | EFR32MG22 |
| Rating | 6V (4*1.5V AA) |
| Wireless Connection | Zigbee 3.0 |
| Communication Distance | 130M (open space) |
| Waterproof | IP55 |
| Working Pressure | 0.06~0.8 MPa |
| Net Weight | 278 g |
| Dimensions | 152 x 100 x 46 mm |
| Color | Black |
| Shell Material | PC + ABS |
| Working Temperature (Ambient) | 5~60 °C |
| Working Temperature (Water) | 5~40 °C |
| Working Humidity | 5%~95% RH, non-condensing |
| Working Altitude | 2000 meters |
| Certifications | CE/FCC/ISED |
| Executive Standard | EN62368-1 |
Download the eWeLink App
Download the 'eWeLink' app from the Google Play Store or Apple App Store to add your SONOFF Zigbee Bridge.
Powering On the Device
Diagram showing battery installation:
- Step 1: Hold both ends of the battery compartment cover and pull out the battery slot.
- Step 2: Insert four AA batteries.
- Step 3: Firmly push the battery slot into the device until the latch clicks into place.
- Step 4: After powering on, the LED indicator will blink.
[QR Code] Scan the QR code to add the device.
Pairing the Device
Follow these steps to pair your device:
- Open the eWeLink app and tap 'Add Device'.
- Tap 'Scan'.
- Scan the QR code on the device.
- Press and hold the button on the device for 5 seconds. The LED indicator will blink slowly for 180 seconds.
- Select your Zigbee Bridge from the list.
- Tap 'Next step'.
- Wait for the pairing to complete.
Compatible Bridges
Recommended SONOFF Bridges: ZBBridge-P (V2.0.0), NPanel Pro (V3.3.0), iHost (V2.1.0), ZBBridge-U (coming soon).*Before adding the device, upgrade the gateway firmware to the above or the latest version.
Other Compatible SONOFF Bridges: ZBDongle-P, ZBDongle-E
Compatible Third-Party Bridges:
- Amazon Echo Plus 2nd, Echo Show 2nd, Echo 4th Gen
*Other bridges supporting the Zigbee3.0 wireless protocol are also compatible. Detailed information is subject to the final product.
Installation
Diagram showing device connection to a faucet and hose.
First, wrap thread sealing tape around the faucet thread, then screw the device's water inlet nut onto the faucet. After testing for leaks, connect the hose to the device's water outlet (if the water outlet leaks, wrap sealing tape around the outlet thread).
It is recommended to install vertically, as horizontal installation may increase flow rate measurement errors.
Communication Range
The maximum communication distance of this device is 130M (open space).
FCC Compliance Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian standard ICES-003(B). This device complies with Industry Canada’s RSS-247. Operation is subject to the condition that this device does not cause harmful interference.
French regulatory text is present in the original document but is omitted here for primary English content.
ISED RF Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
SAR Warning
Under normal conditions of use, this device should be maintained at a minimum distance of 20 cm between the antenna and the user's body.
Disposal and Recycling Information
All products marked with this symbol are Waste Electrical and Electronic Equipment (WEEE as per Directive 2012/19/EU), which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences for the environment and human health. Please contact the installer or your local authorities for more information on the location and terms of such collection points.
♻️ WEEE Symbol
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. hereby declares that the radio equipment type SWV-NH, SWV-BSP is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
CE Frequency Information
EU Operating Frequency Range: Zigbee: 2405–2480 MHz
EU Output Power: Zigbee: 10dBm
| Scatola (Box) | Neto (Net) | Manuale (Manual) | Borsa (Bag) |
|---|---|---|---|
| PAP 21 | PAP 20 | PAP 22 | LDPE4 |
| Karta (Card) | Karta (Card) | Plastica (Plastic) | Plastica (Plastic) |
RACCOLTA DIFFERENZIATA (SEPARATE COLLECTION)
Warnings
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Do not short-circuit batteries.
- Do not use new and old batteries together.
- Do not use batteries of different types/manufacturers together. Do not use batteries with reversed polarity.
- A battery that is leaking or has previously leaked is not suitable for use and should be discarded. Place batteries in a plastic bag without touching them, put on gloves and an apron, then place it in an electronics store recycling box.
- If a leaking battery, in some cases, can damage the device's circuit board and cause it to malfunction. In such a case, take your device to a collection point and hand over the battery to a Bebat collection point.
- Disposing of batteries in fire or a hot oven, or mechanically crushing or cutting them, may cause an explosion.
- Leaving a battery in an environment with extremely high temperatures may cause an explosion or leakage of flammable liquid or gas.
- A battery exposed to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
Contact Information
Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
Postal Code: 518000
Service Email: support@itead.cc
