Hover-1 Horizon Electric Scooter

Model: HY-H2L

Operation Manual

Helmets Save Lives!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

Correct Fitting:

Make sure your helmet covers your forehead.

Incorrect Fitting:

Forehead is exposed and vulnerable to serious injury.

⚠️ WARNING!

PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death.

Thank you for purchasing the Hover-1 Horizon Electric Scooter. Please read all instructions carefully before using and retain this manual for future use and reference.

This manual applies to the Horizon Scooter.

ATTENTION

  1. Use only the supplied charger with this scooter. Charger Manufacturer: COMING DATA CO.,LTD. Model: CP4215
  2. The operating temperature range of the Horizon is 32-113° F (0-45° C).
  3. Do not ride on icy or slippery surfaces.
  4. Read the user manual and warning labels before riding.
  5. Store the Horizon in a dry, ventilated environment.
  6. When transporting the Horizon, avoid violent crashes or impact.

LOW TEMPERATURE WARNING

Low temperature will affect the lubrication of moving parts inside the Horizon scooter, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased.

Use caution when riding the Horizon in cold temperatures (below 40 degrees F).

Doing so may increase the risk of mechanical failures of the scooter, which may lead to damage to your device, other property damage, serious bodily injury and even death.

SAFETY INSTRUCTIONS

? NOTES:

In this manual, the above symbol with the word "NOTES" indicates instructions or relevant facts the user should remember prior to using the device.

⚠️ CAUTION!

In this manual, the above symbol with the word "CAUTION" indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.

⚠️ WARNING!

In this manual, the above symbol with the word "WARNING" indicates a hazardous situation which, if not avoided, can cause death or serious injury.

SERIAL NUMBER

Please keep the serial number on file for warranty claims as well as proof of purchase.

⚠️ WARNING!

WARNING: Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials. Store Indoors When Not in Use.

INTRODUCTION

The Hover-1 Horizon is a personal transporter. Our technology and production processes are developed with strict testing for each scooter. Operating the Horizon without following the contents of this manual may lead to damage to your scooter, or bodily injury.

This manual is designed to give you the information you need for the safe operation and maintenance of your scooter. Please read it thoroughly before riding your Horizon.

PACKAGE CONTENTS

FEATURES/PARTS

Diagram Description: A top-down view of the Hover-1 Horizon electric scooter is shown with numbered callouts pointing to various components.

OPERATING PRINCIPALS

The device uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user's center of gravity. The device also uses a control system to drive the motors that are located within the wheels. The device has a built-in inertia dynamic stabilization system that can help assist with balance when moving forward and backwards, but not while turning.

TIP – To increase your stability, you must shift your weight in order to overcome the centrifugal force during turns, especially when entering a turn at higher speeds.

⚠️ WARNING

Any Hover-1 Horizon that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected.

SPECIFICATIONS

Model: HY-H2L - Hover-1 Horizon
Net Weight: 24.25 lbs (11 kg)
Load: 44-220 lbs (20-100 kg)
Max Speed: Up to 7.45 mph (12 km/h)
Max Distance Range: Up to 8.4 miles (13.5 km)
Max Incline Angle: 15° degrees
Minimum Turning Radius:
Battery Type: Lithium-ion
Battery Voltage: 36 V
Battery Capacity: 4.0 Ah
Power Requirement: AC 100-240V, 50-60 Hz
Wheel Size: 8 Inches (20.3 cm)
Product size: 24.8x9.05x8.27inch (630x230x210mm)
Bluetooth Range: Up to 33ft
Bluetooth Speaker: V4.0 with stereo sound quality
FCC ID: 2AANZH2L
BT ID: D036146

CONTROLS AND DISPLAY

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY

TURNING YOUR DEVICE ON/OFF

Power On: Take your device out of the box and place it flat on the floor. Press the power button (located on the rear of your device) once. Check the LED indicator (located in the center of your device). The battery indicator light should be lit, indicating the device is powered on.

Power Off: Press the power button once.

This Model also has a self-balance function. Generally, the scooter will activate the self-balance function when the device is powered on. If the device doesn't activate the self-balance function, please press the power button twice when the scooter is on.

MAT SENSOR

There are four sensors under the foot mats on your Horizon. When the user steps off the scooter mats, it will automatically initiate self-calibration.

When riding the scooter, you must ensure you are stepping on the foot mats. Do not step or stand on any other area of your scooter.

The Horizon may vibrate or spin in one direction if weight and pressure are applied to only one foot mat.

BATTERY INDICATOR

The display board is located in the middle of the Horizon.

When the LED light turns red, please recharge the device.

RUNNING INDICATOR

When the operator triggers the foot mats, the Running Indicator LED will light up, which means that the system enters the running state.

When the system has an error during operation, the running LED light will turn red (for more details see SAFETY ALERTS).

BLUETOOTH SPEAKER

The Horizon has a powerful built-in wireless speakers so you can play your music while riding.

PAIRING THE SPEAKER

  1. Turn on your Horizon and the speakers will “Ping” to announce that it's waiting for a Bluetooth® connection. This will indicate your Horizon speaker is now in pairing mode.
  2. Place the Horizon and the Bluetooth® device to which you would like to pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart during pairing.
  3. Ensure Bluetooth® is enabled on your phone or music device. Refer to manufacturer's instructions for how to enable Bluetooth® on your device.
  4. Once you have activated Bluetooth® on your device, select the option "HY-H2L" from the list of available Bluetooth® devices.
  5. If required, enter the PIN code "000000" and confirm the entry.
  6. The Horizon will say "Paired" when successfully paired.
  7. Please note, pairing mode on the Horizon will last for two minutes. If no devices are paired after two minutes, the Horizon speaker will automatically return to standby mode.
  8. If pairing is unsuccessful, turn off the Horizon first and re-pair following the aforementioned steps.
  9. If your smart phone is out of range, or the battery is low on your Horizon, your speaker may disconnect from your smart device, and the Horizon will say "Disconnected." To reconnect, follow the aforementioned steps, or recharge your scooter.

NOTE: Once you have paired the Horizon speaker with a device, the speaker will remember this device and will pair automatically when the device's Bluetooth® is activated and in range. You do not need to re-pair any previously connected devices.

Your scooter can pair up to two multi-point devices. You can reconnect a previously paired device without going through the pairing or PIN process on up to two devices.

LISTENING TO MUSIC

Once the Horizon Bluetooth speaker is paired to your device, you can stream music wirelessly through it. Only one speaker will play music as the other speaker is strictly for safety alerts from your Horizon. Select the track you wish to listen to on your device to listen via the speaker. All volume and track controls will be made using your music device. Should you encounter any problems while streaming, please refer to your device's user manual.

SMART PHONE APP

Your Horizon is an App-enabled scooter that works with Apple iOS and Android devices. Download the free Hover-1 App in order to access certain features of your Horizon such as headlight colors and skill mode.

Using a QR code reader, hold the camera on your smartphone over the below QR code to download the Hover-1 App. Feel free to search "Hover-1" in your device App store.

For iOS: Download from the Apple App Store.

For Android: Download from the Google Play Store.

BEFORE RIDING

It is important that you fully understand all elements of your Horizon. If these elements are not used correctly, you will not have full control of your Horizon. Before you ride, learn the functions of the various mechanisms on your scooter.

Practice using these elements of your Horizon at slower speeds in a flat, open area before taking the device out in public areas.

PRE-RIDE CHECKLIST

Ensure that your Horizon is in proper working order each and every time you ride. If a part of the scooter does not function correctly, please contact our Customer Support Center.

⚠️ WARNING

Any Hover-1 Horizon that does not work properly can cause you to lose control and fall. Do not ride a Horizon with a part that is damaged; replace the damaged part before riding.

SAFETY PRECAUTIONS

Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws.

Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.

Your Horizon is not equipped with reflectors. It is not recommended that you ride in conditions of low visibility.

⚠️ WARNING

When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. In addition to keeping your headlight on, wear bright, reflective clothing when riding in poor lighting conditions.

Think about safety when you ride. You can prevent many accidents if you think about safety. The safety checklist is a helpful resource for compact riders.

SAFETY CHECKLIST

⚠️ WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.

RIDING YOUR HORIZON

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.

Before using your device, be sure to familiarize yourself with the operating procedures.

OPERATING YOUR DEVICE

Make sure the device is fully charged before your initial use. For charging instructions, please follow details under CHARGING YOUR DEVICE.

Stand directly behind your device and place one foot on the corresponding foot mat (as described in the diagram below). Keep your weight on the foot which is still on the ground, otherwise the device may begin to move or vibrate, making it difficult to step on evenly with your other foot. When you are ready, shift your weight to the foot already placed on the device and step on with your second foot quickly and evenly (as described in the diagram below).

Diagram Description: Two stages are shown. Stage 1: A person stands behind the hoverboard, with one foot placed on the rear foot mat. Stage 2: The person has stepped onto the hoverboard with both feet, one after the other, now standing on the foot mats.

? NOTES:

Stay relaxed and step on quickly, confidently and evenly. Imagine climbing stairs, one foot, then the other. Look up once your feet are even. The Horizon may vibrate or spin in one direction, if weight and pressure are applied to only one foot mat. THIS IS NORMAL.

Find your center of gravity. If your weight is distributed correctly on the foot mats and your center of gravity is level, you should be able to stand on your device just as if you were standing on the ground.

On average, it takes 3-5 minutes just to get comfortable standing on your device and maintaining proper balance. Having a spotter will help you feel more secure.

The Horizon is an incredibly intuitive device; it senses even the slightest bit of motion, so having any anxiety or reservation about stepping on may cause you to panic and trigger unwanted movement.

When you first begin using your device, the fastest way to move in your desired direction is to focus in that direction. You will notice that just thinking about which way you would like to go will shift your center of gravity, and that subtle movement will propel you in that direction.

Your center of gravity determines which direction you move, accelerate, decelerate, and come to a complete stop. As described in the diagram below, tilt your center of gravity in the direction you wish to move.

To turn, focus on the direction you wish to turn and stay relaxed.

⚠️ WARNING

Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury.

As you get comfortable on the device, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force.

Bend your knees if you encounter bumps or uneven surfaces, then dismount and carry your Horizon to a safe operating surface.

Diagram Description: Three side profiles of a rider on a hoverboard are shown, illustrating weight distribution for movement.

? NOTES:

Try staying relaxed and focus on finding your center of gravity to maintain full control of your Hover-1 Horizon.

Dismounting your device can be one of the easiest steps, yet when done incorrectly, may cause you to fall. To properly dismount, from a stopped position, lift one leg up and set your foot back down on the ground (STEPPING BACK). Then step off completely as described in the following diagram.

Diagram Description: Two stages are shown for dismounting. Stage 1: A person is standing on the hoverboard with one foot on the rear mat. Stage 2: The person has stepped off backward, with both feet on the ground.

⚠️ WARNING

Make sure to lift your leg completely off the foot mat to clear the device when stepping back to dismount. Failure to do so may send the Horizon into a tailspin.

WEIGHT AND SPEED LIMITATIONS

Speed and weight limits are set for your own safety. Please do not exceed the limits listed here in the manual.

⚠️ WARNING

Overweight exertion on the Ultra may increase possibility of injury or product damage.

? NOTES:

To prevent injury, when max speed is reached, the Hover-1 Horizon will beep to alert the user and tilt the rider slowly back.

OPERATING RANGE

The Horizon can travel a distance up to 8.4 miles on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your device.

BALANCE & CALIBRATION

If your Horizon is unbalanced, vibrating, or not turning properly, you can follow the below steps to calibrate it.

SAFETY ALERTS

While riding your Horizon, if there is a system error or illegal operation performed the device will prompt the user in a variety of ways.

You will notice the Running Indicator Light will turn RED and you will hear a beep sound alerting you to take precaution and cease operation, which may make the device stop suddenly.

The following are common occurrences where you will hear the Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure or errors.

⚠️ WARNING

When the Horizon turns off during a Safety Alert, all operation systems will halt. Do not continue attempting to ride the Horizon when the system initiates a stop. Turn your Horizon off and back on to unlock it from a Safety Lock.

CHARGING YOUR HORIZON

CHARGING THE DEVICE

BATTERY CARE / MAINTENANCE

BATTERY SPECIFICATIONS

BATTERY MAINTENANCE

The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.

To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

⚠️ WARNING

Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death.

⚠️ WARNING

SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

CARE & MAINTENANCE

⚠️ WARNING

Avoid using water or other liquids for cleaning. If water or other liquids enter the Hover-1 Horizon, it will cause permanent damage to the internal components.

⚠️ WARNING

Users who disassemble the Hover-1 Horizon scooter without permission will void the warranty.

WARRANTY

For warranty information, Please visit us at: www.hover-1.com

Affix Serial Number Label Here: [____________________]

DESIGN

Hover-1 Horizon is designed to be easily controlled, providing a safe stable form of travel. With a zero degree turning radius, you can operate the Horizon in narrow spaces without moving forward at all. The built-in sensors are responsive with a balancing system. Accelerate or decelerate simply by applying pressure with your feet or by leaning. Two driver motors are controlled independently or with both feet for easy turns, rotations and smooth braking. The Horizon only requires around 3.5 hours of charging for a full charge.

PERFORMANCE

Hover-1 Horizon is a two-wheel balancing electric scooter. It provides a convenient, stable form of transportation, responsive to weight and angles, making it easier and safer to control, allowing you to travel up to 8.4 miles at up to 7.45 mph.

PDF preview unavailable. Download the PDF instead.

8957980 D001 ?direct Adobe Illustrator CC 22.1 (Macintosh) 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www -tools.com)

Related Documents

Preview Hover-1 H1 Electric Scooter User Manual and Safety Guide
Explore the Hover-1 H1 electric scooter with this comprehensive user manual. Learn about safe operation, features like Bluetooth speakers and app connectivity, specifications, maintenance, and important safety guidelines.
Preview Hover-1 H1 Electric Scooter Operation Manual
Comprehensive operation manual for the Hover-1 H1 Electric Scooter, covering safety, features, controls, app usage, and maintenance.
Preview Hover-1 Ultra Electric Scooter Operation Manual & Safety Guide
Comprehensive operation manual and safety guide for the Hover-1 Ultra Electric Scooter (Model HY-RM-ULTRA). Learn how to ride, charge, maintain, and stay safe.
Preview Hover-1 Beast Electric Scooter Operation Manual
This operation manual provides comprehensive instructions for the safe use, operation, and maintenance of the Hover-1 Beast Electric Scooter. It covers safety precautions, operating principles, controls, Bluetooth speaker functionality, smartphone app integration, riding techniques, and charging information.
Preview Hover-1 Beast HY-X10 Electric Scooter Operation Manual
Official operation manual for the Hover-1 Beast HY-X10 electric scooter with Bluetooth speaker. Includes safety instructions, operating procedures, maintenance, and warranty information.
Preview Hover-1 Astro Electric Scooter Operation Manual & Safety Guide (H1-ATD)
Comprehensive operation manual for the Hover-1 Astro electric scooter (H1-ATD). Covers safe riding, features, controls, maintenance, battery care, and safety alerts. Essential reading before operating.
Preview Hover-1 Eclipse Electric Scooter Operation Manual and Safety Guide
Comprehensive operation manual and safety guide for the Hover-1 Eclipse electric scooter (Model HY-ECL). Covers features, specifications, riding instructions, Bluetooth pairing, app usage, charging, battery care, safety precautions, and FCC statements.
Preview Hover-1 Matrix Electric Scooter Operation Manual
Comprehensive operation manual for the Hover-1 Matrix electric scooter, covering safety guidelines, features, controls, riding instructions, charging, battery care, calibration, and FCC compliance.