Samsung QN32Q5/Q6 Series QLED Smart TV Quick Setup Guide

Introduction

This guide provides essential steps for setting up your Samsung QLED Smart TV, covering models QN32Q5*A and QN32Q6*A. It details unboxing, stand installation, and connection port identification.

Brand: Samsung

Models: QN32Q5*A, QN32Q6*A

Initial Setup and Connections

Upon unboxing, connect the necessary cables to the TV's ports:

• USB
• OPTICAL (supports ARC)
• HDMI (supports eARC)
• LAN (for network connectivity)
• ANT (Antenna) x 2

Connect the power cord to the TV and a power outlet. ⚠️ Ensure the TV is placed on a stable surface before powering on.

Diagram Description: Visuals show the various ports available on the TV and the connection of power and network cables.

Attaching the TV Stand

To install the stand:

1. Place the TV face down on a soft, protected surface.
2. Identify the left (L) and right (R) stand pieces.
3. Align each stand piece with the corresponding mounting points on the TV's rear base.
4. Secure each stand piece using the provided screws (e.g., M4 x L14). Typically, two screws are used per stand piece.

Diagram Description: The process illustrates aligning and screwing the L and R stand components to the TV base, highlighting correct placement.

VESA Wall Mount Preparation

For wall mounting, prepare the TV using the VESA mounting interface:

• VESA Standard: 100 x 100 mm
• Screw Type: M4
• Recommended Screw Length: 19-22 mm
• Number of Screws: 4

Diagram Description: The rear of the TV shows the standard VESA mounting hole pattern.

Product Specifications

Key dimensions and weight details for the QN32Q5*A and QN32Q6*A models:

Note: The asterisk (*) in model numbers indicates variable characters specific to regional or sub-model variations.

Safety Precautions

Always adhere to safety guidelines during setup and handling. ⚠️ Avoid exposing the TV to extreme temperatures or direct sunlight.