Ecotap Duo Wide EV Charging Station
A brand of Legrand
General Characteristics
| Reference Number | 65000003 / 6510201 / 65024202 / 65025204 / 6502301 / 65025303 / 65020005 / 65000036 / 65020010 |
| Reference Number (Calibration) | 65458061 |
| Reference Number (FR) | 65331801 / 65331601 |
| Dimensions H x W x D (mm) | 1400 x 360 x 240 |
| Housing Material | Steel 2.2 mm |
| Standard Color | Housing: Ral 6018 / Cover: Ral 9016 for 65458061 / 65293702 / 65000003 / 65293704 Housing: Ral 7011 / Cover: Ral 7011 for 6510201 Housing: Ral 7016 / Cover: Ral 7016 for 6502301 / 65025303 Housing: Ral 7042 / Cover: Ral 9016 for 65025204 Housing: Ral 9016 / Cover: Ral 9016 for 65020005 / 65000036 / 65020010 / 65331601 |
| Steel Treatment | Corrosion protection (KTL) and powder coating |
| Weight (kg) | 71 kg for 65458061 / 65293702 / 65000003 / 65293704 / 6510201 / 65024202 / 65025204 / 6502301 / 65025303 76 kg for 65004410 |
| Number of Charging Points | 2 |
| Socket | Type 2 |
| Cable | Type 2 |
Electrical Characteristics
| Output per Socket | 0 to 22 kW |
| Operating Voltage (Ue) / Rated Current (In A) for the charger | Single-phase wiring, Phase + N 230V~ from 0 to 80A (specified at 20°C) Three-phase wiring, 3 Phases + N 400V~ from 0 to 80A (specified at 20°C) |
| Operating Voltage (Ue) / Rated Current (In A) per charging point | Single-phase wiring, Phase + N 230V~ from 0 to 32A (specified at 20°C) Three-phase wiring, 3 Phases + N 400V~ from 0 to 32A (specified at 20°C) |
| Impulse Voltage (Uimp) | 4kV |
| Insulation Voltage (Ui) | 230V single-phase, 500V three-phase |
| Frequency (fn) | 50Hz/60Hz |
| Rated Voltage | 1 Phase + N: 230V - 3 Phases + N: 400V |
| Voltage Tolerance (V) Independent of Vehicle Requirements | 195V - 265V |
| Integrated Protection System at Charging Station | Main switch 125A |
| Integrated Protection System per Charging Point | Fuse Type gG 32A + RCD 40A 30mA Type B |
| Conditional Short-Circuit Current | 100kA IEC/EN 60898-1 |
| Permissible Thermal Load at Short Circuit | 16 000 A²s |
| Connection to the Power Grid | Phase/Neutral, rigid cable, 2.5 to 35 mm², Screw terminals H07 V R/U Earth, rigid cable, 2.5 to 35mm², Screw terminals HO7 V R/U |
| Charging Type | Mode 3 charging station with a locking system for Mode 3 |
| Vehicle Connection Socket Mode 3 (65458061 / 65293702 / 65000003 / 65293704 / 6510201 / 65024202 / 65025204 / 6502301 / 65025303) | Type 2 3P+N (single-phase compatible) with control units according to IEC 62191-1 and IEC 62196-2. Use only a manufacturer-approved plug with silver-plated contacts. The use of extension cords and adapters is prohibited. |
| Vehicle Connection Socket Mode 2 (65293702 / 65293704) | Type E/F for domestic use 2P+E (16A-250V) according to local regulations Use of extension cords and adapters is prohibited. |
| AC Meter | MID certified, Class B according to EN 50470-1, -3 |
| Back-Office Protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Connectivity Ethernet | RJ45 connector |
Environment
| Operating Temperature | -25°C / +50°C |
| Storage Temperature | -25°C / +80°C |
| Relative Humidity | 0 to 90% without condensation |
| Corrosion Class | C4 according to IEC 9223 and IEC 12944 3C3/4C3 according to IEC 60721-3 |
| Protection Class | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not |
| Noise Level | < 40 dBA/1m |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS) |
| Installation | Indoor or outdoor area, zone with restricted access, intended for use by normal persons (DBO), installation in cabinet (wall mounting), pollution degree 3, TNS, TT, compatible earthing system. In case of an IT earthing system, this can be modified on site by adding an isolation transformer. |
| Electrical Protection | Class 1 IEC 61140 |
Electromagnetic Compatibility
| European Standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014 / 30 / EU |
| Type of Radio Technology | GSM 2G/3G/4G, GPRS, RFID |
| Suitable Charging Cards | Mifare, Ntag and iCODE SLI card |
