Brook Game Controller Super Converters
P3/P4 to PSClas/P2 Controller Adapter
Introduction & Compatibility
The Brook Game Controller Super Converter allows you to use various controllers with different gaming consoles and PC. It supports controllers such as Switch PRO, PS5, PS4, PS3, PS Classic, PS2, and PC (X-Input) on compatible systems.
Supported Systems:
- Switch PRO
- PS5
- PS4
- PS3
- PS Classic
- PS2
- PC (X-Input)
Setup and Connection
Initial Connection and Registration
For first-time use, especially with wireless controllers, a USB cable connection is required for registration.
- Connect the converter to your target console:
- For PS2: Connect the converter directly.
- For PS Classic: Connect the converter using the black USB cable from the splitter cable.
- Connect your game controller (PS3/PS4) to the converter using a standard USB cable. The controller will automatically register with the converter.
Port Indicators: Each converter supports one game controller at a time. Wireless PS3/PS4 controllers should connect automatically. If not, re-register the controller using a USB cable.
PC (X-Input) Mode
When connected to a PC, press and hold the [Brook Key] until it flashes five times to switch to X-Input mode.
Power Requirements
If the controller does not function correctly due to insufficient power, connect the micro USB port on the converter to a 5V/1A charger using the gray USB cable from the splitter cable.
Wireless Use
Once registered, you can disconnect the USB cable. Press the [PS Button] to wake the controller for wireless operation. This registration process only needs to be completed once.
Xbox Bluetooth Controller Compatibility Note
Please be aware that Xbox Bluetooth controllers that have undergone a firmware update to version 5.11.3118.0 (changing Bluetooth to BLE) may not be supported wirelessly by some Brook products.
Button Mapping
The following table shows the button mapping across different platforms and controllers.
| Function | Switch PRO | PS5 | PS4 | PS3 | PS Classic | PS2/PS | PC (X-Input) |
|---|---|---|---|---|---|---|---|
| DPad UP | DPad-UP | DPad-UP | DPad-UP | DPad-UP | DPad-UP | DPad-UP | DPad-UP |
| DPad DOWN | Dpad-Down | Dpad-Down | Dpad-Down | Dpad-Down | Dpad-Down | Dpad-Down | Dpad-Down |
| DPad LEFT | DPad-Left | DPad-Left | DPad-Left | DPad-Left | DPad-Left | DPad-Left | DPad-Left |
| DPad RIGHT | Dpad-Right | Dpad-Right | Dpad-Right | Dpad-Right | Dpad-Right | Dpad-Right | Dpad-Right |
| Button 1 | X | X | X | X | X | X | X |
| Button 2 | O | O | O | O | O | O | O |
| Button 3 | Square | Square | Square | Square | Square | Square | Square |
| Button 4 | Triangle | Triangle | Triangle | Triangle | Triangle | Triangle | Triangle |
| Start | Start | Start | OPTIONS | Start | Start | Start | Start |
| Select | Select | Select | SHARE | Select | Select | Select | Select |
| L1 | L1 | L1 | L1 | L1 | L1 | L1 | L1 |
| R1 | R1 | R1 | R1 | R1 | R1 | R1 | R1 |
| L2 | L2 | L2 | L2 | L2 | L2 | L2 | L2 |
| R2 | R2 | R2 | R2 | R2 | R2 | R2 | R2 |
| L3 | L3 | L3 | L3 | L3 | L3 | L3 | L3 |
| R3 | R3 | R3 | R3 | R3 | R3 | R3 | R3 |
| Analog Stick | ANALOG | ANALOG | ANALOG | ANALOG | ANALOG | ANALOG | ANALOG |
Advanced Features
Procedure for Assigning a Turbo Button
- Press the [PS Button] and [SELECT Button] simultaneously. (For PS4 controllers, press the [PS Button] and [SHARE Button] simultaneously.)
- Press and hold the [SELECT Button] (or [SHARE Button] for PS4 controllers), then press the button you wish to assign as the Turbo button. Multiple buttons can be selected.
- Press the [START Button] (or [OPTIONS Button] for PS4 controllers) to complete the setting.
Procedure for Clearing a Turbo Button Assignment
- Press the [PS Button] and [SELECT Button] simultaneously. (For PS4 controllers, press the [PS Button] and [SHARE Button] simultaneously.)
- Press and hold the [SELECT Button] and [START Button] simultaneously (or [SHARE Button] and [OPTIONS Button] for PS4 controllers) to clear the current Turbo setting.
- Press the [PS Button] to exit the settings mode.
Procedure for Customizing Buttons
This feature allows you to remap button functions.
Assigning a function from one button to another:
- Press the source button (the button whose function you want to copy).
- Press and hold the [SELECT Button] (or [SHARE Button] for PS4 controllers), then press the target button (the button you want to assign the function to).
- Press the [START Button] (or [OPTIONS Button] for PS4 controllers) to complete the setting.
Assigning a function from one button to multiple buttons:
- Press the source button.
- Press and hold the [SELECT Button] (or [SHARE Button] for PS4 controllers), then press the target buttons (e.g., X, Triangle, Square) one by one in any sequence.
- Press the [START Button] (or [OPTIONS Button] for PS4 controllers) to complete the setting.
Procedure for Resetting All Customized Buttons
- Press the [PS Button] and [START Button] simultaneously. (For PS4 controllers, press the [PS Button] and [OPTIONS Button] simultaneously.)
- Press and hold the [SELECT Button] and [START Button] simultaneously (or [SHARE Button] and [OPTIONS Button] for PS4 controllers) to clear all customized settings.
- Press the [PS Button] to exit the setting mode.
Additional Information
Product Part Number: ZPP4000
For more details, please visit the official website: www.brookaccessory.com
