Brook Wingman PS2 Converter Manual
Content
The manual provides detailed instructions for using the Brook Wingman PS2 Converter.
Key sections include:
- Connection Diagram and Notice
- LED Display
- Connection procedures for various consoles and controllers
- Corresponding Buttons List for different controllers
- Turbo Function Settings and Clearing
- Remap Settings and Clearing
- Switching Input Modes
- Other information, including FCC statement
Connection Diagram and Notice
This section illustrates how to connect the Wingman PS2 to different consoles and controllers, including wired and wireless options for PS, Xbox, and Switch.
Notice:
- Wireless controllers require initial USB registration.
- An additional microUSB may be needed for controllers with high power consumption.
- Each Wingman PS2 supports only one device at a time.
- The converter supports most compatible accessories, with firmware updates expanding support.
- Turbo and Remap functions can only be set in gamepad mode.
LED Display
The LED indicators on the Wingman PS2 provide status information:
| LED | Frequency | Status |
|---|---|---|
| Green | Flashing Slowly | Successfully connected to console |
| Green | Flashing Fast | Enter Bluetooth pairing mode |
| Light blue | Permanently On | Successfully connected to console and controller; Digital output |
| White | Permanently On | Successfully connected to console and controller; Analog output |
| White | One Blinking | PS classic turn into X-Input mode |
| White | Two Blinking | X-Input mode turn into PS classic |
Function: Turbo & Remap
| LED | Frequency | Status |
|---|---|---|
| Yellow | Permanently On | Entering Turbo setting |
| Purple | Permanently On | Entering Remap setting |
Connection
1. Connects to Console
Connect the Wingman PS2 to a PS or PS2 console, or to a PS Classic via USB. A slow flashing Green LED indicates a successful connection.
2. Connects to Wired Controller
Connect a PS3/PS4 controller via USB. Registration is automatic. A permanently Light blue LED indicates a successful connection. Some high-power devices (PS5, Switch Pro) may require an external USB power source.
3. Connects to Wireless Controller
(1) PS5 / PS4 / PS3 / Switch Pro
After removing the USB cable, the controller is ready for wireless use. A permanently Light blue LED indicates a successful connection. This process only needs to be completed once.
(2) Xbox 360
Connect the wireless X360 receiver to the converter via USB. A permanently Light blue LED indicates a successful connection.
(3) Xbox One / Xbox Elite 2
Hold the Brook Key for 1 second to enter wireless pairing mode. Press the Pair button on the wireless controller. A permanently Light blue LED indicates a successful connection. Note: If the Xbox One/Elite 2 controller is plugged in via USB, Bluetooth connection may need re-pairing. Repeatedly pressing the Xe key may cause the controller to crash.
Corresponding Buttons List
This section provides a detailed mapping of buttons for various controllers (PS3/PS4/PS5/PS Classic, Xbox 360/Xbox One, Switch) to their PS/PS2 equivalents.
Turbo Function Settings
Instructions for setting Turbo function, primarily using a PS5 controller as an example:
- Enter setting mode: Press SHARE + PS Key simultaneously. The Yellow LED will be permanently on.
- Choose Turbo buttons: Hold SHARE, then press the desired button(s). Multiple buttons can be set. Supported buttons include: X, Circle, Square, Triangle, L1, R1, L2, R2, L3, R3.
- Save settings: Release all buttons, then press OPTIONS to save.
- Exit: Press PS Key. The Yellow LED will turn off.
Clearing Turbo Function
Instructions for clearing Turbo function:
- Enter setting mode: Press SHARE + PS Key simultaneously. The Yellow LED will be permanently on.
- Clear all Turbo functions: Press SHARE + OPTIONS simultaneously.
- Exit: Press PS Key. The Yellow LED will turn off.
Remap Settings
Instructions for custom button remapping, using a PS5 controller as an example:
- Enter setting mode: Press OPTION + PS Key simultaneously. The Purple LED will be permanently on.
- Transfer function from one button to another: Press and release a button, then hold SHARE and press the target button.
- Transfer function from one button to multiple buttons: Press and release a button, then hold SHARE and press multiple target buttons.
- Save settings: Release all buttons, then press OPTIONS to save.
- Exit: Press PS Key. The Purple LED will turn off.
Clearing Remap Function
Instructions for clearing custom button remapping:
- Enter setting mode: Press OPTION + PS Key simultaneously. The Purple LED will be permanently on.
- Clear all remapped functions: Press SHARE + OPTIONS.
- Exit: Press PS Key. The Purple LED will turn off.
Switch the Input mode
The default mode is PS classic. Instructions for switching modes:
- PS classic to X-Input Mode: Hold SELECT + Down on the D-pad for 2 seconds.
- X-Input to PS classic Mode: Hold SELECT + Up on the D-pad for 2 seconds.
Other
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. It generates, uses, and radiates radiofrequency energy. If interference occurs, users are encouraged to try measures like reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a technician. Unauthorized modifications may void the user's authority to operate the equipment.
P/N: Wingman PS2, M/N: ZPP0062
