Philips AWP2935 Water Filter Pitcher User Manual
This manual provides instructions for using your Philips AWP2935 water filter pitcher.
Product Overview
The Philips AWP2935 water filter pitcher, featuring Micro X-Clean technology, is designed to provide you with great-tasting filtered water. The pitcher has a capacity of 2.6 liters.
Key Components:
- Pitcher body
- Lid with indicator
- Filter cartridge
- Filter cartridge holder
Getting Started
Filter Installation
- Soak the filter cartridge in cold water for 5 minutes.
- Rinse the filter cartridge under cold running water for 30 seconds.
- Insert the filter cartridge into the holder.
- Place the holder into the pitcher.
- Insert the lid.
Indicator Setup
The indicator on the lid helps you track filter usage. Follow the instructions on the lid to set the filter replacement reminder.
Using the Pitcher
- Fill the pitcher with cold tap water.
- Allow the water to filter through the cartridge.
- Pour and enjoy filtered water.
Maintenance and Care
- Clean the pitcher, lid, and filter holder regularly with mild soap and water.
- Do not use abrasive cleaners.
- Replace the filter cartridge every 4 weeks or when the indicator shows it's time.
Troubleshooting
Issue: Water is not filtering properly.
Solution: Ensure the filter cartridge is correctly installed and soaked. Check if the filter needs replacement.
Issue: Indicator not working.
Solution: Ensure the lid is properly closed and the indicator is set correctly.
Safety Information
- Use only with cold tap water.
- Do not filter hot water.
- Keep the pitcher away from direct sunlight and heat sources.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, unless supervised.
Warranty Information
Refer to the warranty card included with your product for detailed warranty information.
Contact Information
For customer support, please visit the Philips website or consult the warranty information.
