Mobvoi Home Treadmill Plus

Model NO: T4225

Product Instruction Manual

Safety Precautions and Warning Items

Please read this instruction manual carefully and pay attention to the following safety precautions before using the treadmill.

General Safety Precautions

Emergency Egress

The following is the method to exit the treadmill in an emergency:

Prohibited Usage

Warning: For Accident Prevention, Follow These Rules:

Warning! Essential!

Individuals undergoing treatment or with the following conditions should consult a doctor before use:

If you experience abnormal pain, such as back pain, leg numbness, dizziness, irregular heartbeat, or unusual discomfort, stop immediately and consult a medical professional.

Do not allow children to use or play around this product. Failure to comply may result in injury.

Supervisors of children must ensure they do not play with this product. Failure to comply may result in injury.

Before use or during loading/unloading, ensure no people or pets are around the product (rear, bottom, front).

Prohibited!

Safety Precautions Regarding Power

Do Not Disassemble the Treadmill!

It is strictly prohibited to disassemble, repair, or replace parts of the treadmill. Mechanical failure may cause injury.

Avoid Contact with Water!

Do not allow the main unit or control parts to come into contact with water or other conductive liquids. Otherwise, it may cause electric shock or fire.

Prohibited!

Unplugging the Power Cord

Grounding Required!

This product requires grounding. Grounding helps minimize electrical resistance in case of malfunction, reducing the risk of electric shock.

Danger!

Improper connection of the product's grounding conductor can cause electric shock. If you have doubts about grounding, consult a professional electrician. Do not modify the plug if it does not fit your outlet.

Product Diagram:

  • Push Button: Located on the console.
  • Console Mast: The upright support for the console.
  • Seat Riser: Part of the main frame.
  • Right Riser: Upright support.
  • Safety Lock: A mechanism to secure the folded treadmill.
  • Display Window: Shows speed, time, distance, calories.
  • Upper Shroud: Covers the top part of the console.
  • Horn: Likely a button for alerts or functions.
  • Folding Handle: Used to fold the treadmill.
  • Running Belt: The surface for walking/running.
  • Adjustable Footrest: For leveling the treadmill.
  • Side Rail: The platform beside the running belt.
  • Right Rear Tail Stock: Rear support structure.
  • Left Rear Tail Gate: Rear support structure.

Packing List:

Item No. Name Quantity Remarks
1 Body 1 See attached table
2 Parts Package 1 See attached table

Product Introduction

Technical Specifications

Technical Specification Value
Operating Voltage AC 220-240V 50/60Hz
Maximum Load 120kg
Product Dimensions 1239*642*1126mm
Folded Dimensions 1379*642*119mm
Running Board Area 420*1020mm
Maximum Output 2.5HP
Speed Range 1-12km/h
Control Method Remote Control, Electronic Display

Accessories (Parts Spare Parts Package List)

No. Name Quantity Remarks
1 Cross-head countersunk tapping screw 2 Fixed phone holder
2 5# Allen wrench 1 Other
3 6# Allen wrench 1 Running belt adjustment
4 Spanner wrench 1
5 Socket wrench 1
6 Phone holder 1
7 Remote control 1
8 Safety lock 1
9 Methyl silicone oil 1
10 Instruction Manual, Certificate of Conformity 1
11 Power cord 1

Assembly Procedure

Follow these steps to assemble the treadmill:

  1. After unpacking the main unit, place it on the floor as shown in Step (A). Fold the "Folding Handle" in the direction indicated. The bottom end of the console mast will naturally spread to both sides. Lift the console mast to the highest position as shown in Step (B). Press down the "Folding Handle" as shown in Step (C) to lock the console mast.
  2. As shown in Step (D), use the 5# internal hexagon wrench to secure two ST4.2*16 cross-head countersunk screws to fix the phone bracket to the top of the console. The red safety lock (E) is magnetically attached to the yellow position below the control panel. When using the treadmill, attach one end of the safety lock to the edge of your clothing.

Assembly Diagrams:

  • Diagram (A) shows placing the main unit on the floor.
  • Diagram (B) shows lifting the console mast.
  • Diagram (C) shows pressing the folding handle to lock the mast.
  • Diagram (D) shows attaching the phone bracket with screws.
  • Diagram (E) shows the safety lock.

Folding and Moving the Treadmill

  1. As shown in Step (F), pry open the "Folding Handle" in the indicated direction. The bottom end of the upright column will spread out naturally. Slowly lower the upright column to the folding limit point in the direction shown in Step (G). Press down the "Folding Handle" in the direction shown in Step (H) to lock the upright column.
  2. To move the treadmill, first fold the upright column according to the previous step. Before moving, unplug the treadmill's power cord. Then, lift the rear of the treadmill with both hands, allowing the wheels to touch the ground, and lift the front adjustable footrests off the ground. This allows you to move the treadmill forward or backward.
  3. If the ground is uneven or the treadmill wobbles, adjust the adjustable feet at the center and rear of the treadmill to the appropriate position. The feet must be in contact with the ground (see below).

Folding and Moving Diagrams:

  • Diagram (F) shows opening the folding handle.
  • Diagram (G) shows lowering the upright column.
  • Diagram (H) shows locking the upright column.
  • Diagram showing adjustable feet for leveling.

Folding Handle Tension Adjustment

The tension is slightly adjusted at the factory, but users can adjust the folding handle to suit their preference. If it is too loose, the clearance between the folding part of the console mast and the main unit will increase, potentially causing the treadmill to shake. Be careful not to loosen it too much.

  1. As shown in Step ①, remove the plug from the bottom end of the left console mast. Combine the Allen wrench and socket wrench with the lever.
  2. Next, as shown in Step ②, insert the socket wrench's hexagon head into the hole at the bottom end of the left console mast. Tighten clockwise and loosen counterclockwise to adjust.

Handle Tension Adjustment Diagrams:

  • Diagram showing steps ① and ② for adjustment.
  • Diagram showing numbered parts (1, 2, 3) related to the adjustment mechanism.

Exercise Recommendations and Guidance

Warm-up

A 5-10 minute warm-up is recommended before each session.

Breathing

Do not hold your breath during exercise. Breathe regularly in sync with your movements. If your breathing becomes too rapid, stop exercising immediately.

Frequency

Muscles in the same group require 48 hours of rest. Therefore, do not train the same muscle group continuously.

Training Load

Determine the training load based on your individual fitness level and gradually increase the intensity. Initial muscle soreness is normal during training. Consistent exercise will gradually alleviate the pain.

Relaxation

Perform a 5-minute cool-down after each training session to prevent prolonged muscle tension and maintain muscle elasticity. Stretch your leg muscles.

Diet and Hydration

It is recommended to exercise one hour after a meal. Do not eat immediately after exercising. Drink water moderately during exercise. Avoid excessive intake, especially if you have heart or kidney conditions.

Stretching Exercises

It is recommended to perform stretching exercises before using the treadmill. Warm muscles are more flexible, so perform a 5-10 minute warm-up. Perform the following stretches (5 repetitions per leg, 10 seconds each) before running. Repeat these exercises after running on the treadmill.

Stretching Diagrams:

  • Diagram showing 5 different stretching poses.
  1. Forward Stretch: Slightly bend both knees, relax your back and shoulders, and lean forward slowly. Try to touch your toes. Hold for 10-15 seconds and relax. Repeat 3 times (Diagram 1).
  2. Achilles Tendon Stretch: Sit on a clean mat with one leg extended. Bring the other leg inward, pressing the sole of your foot against the inner thigh of the extended leg. Try to touch your toes. Hold for 10-15 seconds and relax. Repeat 3 times for each leg (Diagram 2).
  3. Calf and Heel Tendon Stretch: Stand facing a wall, place your hands on the wall, and extend one leg backward. Keep the back leg straight and the heel on the ground, leaning towards the wall. Hold for 10-15 seconds and relax. Repeat 3 times for each leg (Diagram 3).
  4. Thigh Muscle Stretch: Hold onto a wall or table for balance with your left hand. Extend your right arm backward and grasp your right ankle. Pull your heel towards your buttocks until you feel a stretch in the front of your thigh. Hold for 10-15 seconds and relax. Repeat 3 times for each leg (Diagram 4).
  5. Adductor (Inner Thigh) Stretch: Sit with the soles of your feet together, knees pointing outwards. Squat down, pull your feet towards you, and bring them close to your groin. Hold for 10-15 seconds and relax. Repeat 3 times (Diagram 5).

Basic Operation

Display

The display shows a countdown upon startup and then cycles through different display sections every 5 seconds (in the order of SPEED, TIME, DIST, CAL).

Display Interface:

  • The LED display cycles through indicators like SPEED, TIME, DIST, CAL.
  • In standby mode, the display enters sleep mode after 10 minutes of inactivity. It can be reactivated by pressing keys, the remote, or the safety lock.

Display Indicator Range

Setting Parameter Initial Value Display Range
Time (min:sec) 0:00 0:00-99:59
Speed (km/h) 1.0 1.0-12.0
Distance (km) 0.00 0.00-99.99
Calories (kcal) 0.0 0.0-9999

Remote Control Pairing Method

With the safety lock disengaged, press and hold the "I▷" button on the remote control. When you hear continuous beeps from the treadmill's buzzer, pairing is successful. You can then operate the treadmill with the remote. Once paired, re-pairing is not required for subsequent uses.

Bluetooth Audio Connection

  1. In standby mode, turn on your phone's Bluetooth and search for the treadmill's Bluetooth audio name "Mobvoi TMP". Press the "-" key on the remote control. Your phone will display the corresponding Bluetooth name (Mobvoi TMP); click to connect.
  2. After connecting to Bluetooth audio, in standby mode, press the "-" key on the remote control to disconnect the Bluetooth audio from your phone.

Remote Control Functions

  1. Start/Stop: In standby mode, press the "Start/Stop" button on the remote control. The treadmill will start a 3-second countdown and begin operating at a speed of 1.0 km/h. During exercise, you can press the "Start/Stop" button at any time to stop the motor.
  2. Speed Adjustment: While the treadmill is running, briefly press the "+" button on the remote control to increase speed gradually. Press and hold to increase speed rapidly. Speed increases in increments of 0.5 km/h.
  3. Speed Reduction: While the treadmill is running, briefly press the "-" button on the remote control to decrease speed gradually. Press and hold to decrease speed rapidly. Speed decreases in increments of 0.5 km/h.
  4. Speed Shortcut "3": Press this button for a quick speed setting of 3 km/h.
  5. Speed Shortcut "6": Press this button for a quick speed setting of 6 km/h.
  6. Stop Button: During operation or pause, pressing the stop button will end the treadmill's operation.

Remote Control Buttons:

  • The remote has function buttons: "Speed -", "3", "Start/Pause", "Stop", "6", "Speed +", "Speed +".
  • Start/Pause Button: In standby mode, press "I▷" to activate the treadmill. During operation, press "I▷" to pause the treadmill (Note: After pausing, "PAUSE" will be displayed, followed by a countdown of 3333, 2222, 1111 before returning to minimum speed).
  • Speed Reduction: When the treadmill is running, briefly pressing the "-" button on the display or remote control will gradually decrease speed. Holding it down will rapidly decrease speed, decreasing in 0.5 km/h increments.
  • Speed Increase: When the treadmill is running, briefly pressing the "+" button on the display or remote control will gradually increase speed. Holding it down will rapidly increase speed, increasing in 0.5 km/h increments.
  • 3: Speed shortcut button "3".
  • 6: Speed shortcut button "6".
  • Stop Button: Pressing the stop button during operation or pause will end the treadmill's operation.

Safety Clip Function

Removing the safety clip will display an error code "E07" on the treadmill's display. If the safety clip is removed while the treadmill is operating, an emergency stop will occur. The treadmill cannot be operated without the safety clip attached.

Basic Operation

Walking Mode and Running Mode

There are Walking Mode and Running Mode. When folded parallel to the console mast, the treadmill is in Walking Mode with a speed range of 1-6 km/h. When unfolded, the treadmill is in Running Mode with a speed range of 1-12 km/h.

Mode Illustration:

  • Diagram showing the treadmill in a folded (walking) position.
  • Diagram showing the treadmill in an unfolded (running) position.

Mobvoi Home Treadmill Smart Experience

Connect your Wear OS by Google™ smartwatch and install the Mobvoi Treadmill app to enhance your treadmill experience. This allows you to continuously track exercise data and monitor your heart rate simultaneously on both your smartwatch and the treadmill.

Mobvoi Treadmill App Download and Installation

  1. Open the Play Store on your smartwatch and search for "Mobvoi Treadmill" to install the app.
  2. Similarly, search for the "Mobvoi Account" app in the Play Store and install it.

App Icons:

  • Icon for Mobvoi Treadmill app.
  • Icon for Mobvoi Account app.

Sign in to Mobvoi Account

  1. After installation, open the watch platform and the Mobvoi Treadmill app. Select the option to log in with your Mobvoi Account via watch or phone.
  2. If you do not have a Mobvoi Account, select the option to log in via phone and follow the guide to complete account registration.

Mobvoi Treadmill App Experience

  1. Ensure the treadmill is powered on and in Bluetooth mode, and that your smartwatch's Bluetooth is enabled. Open the Mobvoi Treadmill app on your smartwatch, select "Connect Device", and confirm automatic pairing between the treadmill and smartwatch. Connection should be successful.
  2. Once paired, the Mobvoi Treadmill app on your smartwatch will provide direct access to real-time information such as heart rate, exercise records, duration, speed, total distance, and calories.
  3. Monitor data during workouts and set the treadmill to a lower speed to ensure safety.
  4. At the end of an exercise session, the smartwatch platform will generate a comprehensive sports record.

Smartwatch App Display:

  • Connected status shown on the watch.
  • Real-time display of Duration, Pace, Speed, and Distance.

Experience Mobvoi Health App on Mobile Phone

Sync your smartwatch data to the Mobvoi Health app on your mobile phone for a complete exercise experience.

  1. Search for the Mobvoi app in your app store, download, and install it. Log in to your Mobvoi Account.
  2. Navigate to "Sports Card" in the mobile Mobvoi app to view your exercise history from the Mobvoi Treadmill app.
  3. Access detailed data records in the mobile Mobvoi app and share your exercise history with others to enhance your fitness journey.

Common Malfunctions and Troubleshooting

If you have any other questions, please contact your local retailer or our after-sales service.

Malfunction Possible Cause Troubleshooting Steps
Treadmill does not operate. Power cord is not connected. Connect the power cord to the outlet.
Power is not turned on. Turn the power switch to the ON position.
Running belt does not move smoothly. Circuit signal system failure. Check the input and signal lines of the controller.
Running belt slips. Insufficient lubrication. Apply methyl silicone oil lubricant.
Running belt is too tight. Adjust the tension of the running belt.
Belt is loose. Running belt is loose. Adjust the tension of the running belt.
Belt is loose. Belt is loose. Adjust the belt tension.

Display Error Messages and Solutions

Error Code Possible Cause Troubleshooting Steps
E01 Lower control and electronic board communication abnormal. Check if the communication cable between the lower control and electronic board is loose or disconnected.
E02 1. Motor wire is loose or disconnected.
2. Carbon brush is worn or not contacting the rotor.
Check if the motor wire is loose or disconnected. If not disconnected, check if the motor brush is worn or not contacting the rotor. If the motor is normal, the lower control may be damaged.
E05 Overload protection activated. If overload occurs and the rated current is exceeded, turn off the power and restart.
E07 Safety clip is not attached. Check if the safety clip is not attached or if the safety clip wire is loose.
E08 Communication abnormal between upper and lower tables. Check if the communication line connecting the upper and lower tables is loose or disconnected.
Display abnormal External interference. Turn off the power switch, wait 1 minute, then turn it back on and restart.

Product Maintenance

1. Lubrication:

The treadmill requires lubrication with methyl silicone oil after a period of use. Recommended frequency:

Note: Excessive lubrication is not recommended. Proper lubrication is essential for extending the treadmill's lifespan.

2. Checking if Lubrication is Needed:

To check if lubrication is needed, lift the treadmill belt and touch the center of the underside of the belt. If you feel a slight amount of silicone oil on your fingers, lubrication is not necessary. If the running board feels dry and no silicone oil is present on your fingers, lubrication is required.

Lubrication Procedure:

3. Running Belt Tension Adjustment:

All treadmills require running belt tension adjustment before factory shipment and after home assembly. The belt may loosen with use. If the belt slips during operation, it needs adjustment. Turn the belt adjustment bolts clockwise on both sides simultaneously. If the treadmill is too loose, slipping may occur between the running belt and the rollers. However, over-tightening is not ideal and can damage the motor, running belt, rollers, etc.

Running Belt Alignment Adjustment

All treadmills require running belt tension adjustment before factory shipment and after home assembly. However, belt misalignment may occur after use due to the following reasons:

If the running belt is misaligned during use, it may return to normal operation after running for a few minutes without load. If automatic recovery is not possible, use the included 6# Allen wrench to adjust gradually by half a rotation.

Note: Belt misalignment is not covered by the warranty. Maintenance should be performed according to the instruction manual. Prompt detection and correction are necessary to prevent serious damage.

Service Commitment

For normal use, Mobvoi will provide free replacement parts for non-human induced damage within one year of purchase. After the warranty period, spare parts will be provided at a preferential price.

This product is intended for home use only. Mobvoi is not responsible for issues arising from commercial use. For after-sales issues, please contact your local retailer.

FCC Compliance Statement

The warranty for the product purchased is the statutory warranty service in the country where the customer purchased the product. Detailed information regarding regulatory compliance and the complete Supplier EU Declaration of Conformity can be obtained from the official website.

For more details, please visit: www.mobvoi.com/products

If you encounter any issues, please feel free to contact us. Customer Support: support@mobvoi.com

The T4225 treadmill comes with a limited warranty. For one year under normal use, Mobvoi will provide free parts for non-human induced damage. After the warranty period expires, spare parts will be provided at a preferential price for early purchasers.

Manufacturer: Jiangxi EQi Industrial Co., Ltd.

FCC Declaration

This product has been tested. The equipment should be installed and operated with a minimum distance of 15cm between the antenna and all persons.

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

Models: T4225 Treadmill Plus, T4225, Treadmill Plus, Plus

PDF preview unavailable. Download the PDF instead.

Mobvoi Home Treadmill Plus User Manual Japanes macOS 版本10.15.7(版号19H15) Quartz PDFContext 预览

Related Documents

Preview Mobvoi Walking Treadmill N4092A: Product Instruction Manual
Comprehensive instruction manual for the Mobvoi N4092A Walking Treadmill, covering safety precautions, setup, operation, maintenance, and troubleshooting.
Preview Product Instruction Manual for Mobvoi T4015 Electric Treadmill
Comprehensive instruction manual for the Mobvoi T4015 electric treadmill, covering safety precautions, product introduction, installation, operation, maintenance, and troubleshooting. Includes technical specifications and spare parts list.
Preview Household Electric Treadmill T4020 User Manual
Comprehensive user manual for the Mobvoi T4020 household electric treadmill, covering safety precautions, product description, installation, operation, maintenance, troubleshooting, and warranty information.
Preview Mobvoi Walking Treadmill Fit TM09 Instruction Manual
Instruction manual for the Mobvoi Walking Treadmill Fit, model TM09. Includes safety precautions, product overview, assembly and storage, usage guidance, troubleshooting, maintenance, and warranty information.
Preview Troubleshooting Steps for Mobvoi Home Treadmill
A guide to troubleshooting common issues with the Mobvoi Home Treadmill, including signal line problems, motor cable issues, overload, and system failures.
Preview TicWatch Atlas User Guide: Setup, Features, and Operation
Comprehensive guide for the Mobvoi TicWatch Atlas smartwatch, covering setup, health tracking, fitness modes, app management, and essential features.
Preview TicWatch Pro 5 Enduro User Help Guide - Features, Setup, and Health Tracking
Comprehensive user guide for the Mobvoi TicWatch Pro 5 Enduro smartwatch. Learn setup, navigation, watch faces, health monitoring (heart rate, sleep, SpO2), TicExercise, and advanced settings.
Preview Mobvoi Mini: Portable Digital Voice Recorder with Noise Reduction and AI Transcription
Discover the Mobvoi Mini, an intelligent, magnetic digital voice recorder featuring noise reduction, 500H recording capacity, speech-to-text transcription, and long battery life. Ideal for meetings, lectures, and interviews.