Instruction Manual for aultop models including: ATMS6002WM, ATMS6002WM WiFi Smart Meter, ATMS6002WM, WiFi Smart Meter, Smart Meter, Meter
Index of /Images/spec
ORBIS DIGITAL & ANALOG TIME SWITCHES
WiFi Smart Meter 1. Download and Install Mobile App Connect your phone to local Wi-Fi first. Use your phone to scan the QR code below to Download and install the App. Operating Instructions 2. Register Account WiFi Smart Meter Operating Instructions 5. Expense management (Not needed if Prepayment function not in use) 3. Add New Device Connect the Device with mains supply(100-250VAC), for the connection diagrams see section 14. Press and hold the button for about 5 seconds until the Blue Led blinks fast. Click"+" on the homepage. Add or Click Add Device Input Wi-Fi password and confirm. 4. Switch ON/ OFF The App can display: Power (W), Current (mA), Voltage (V), Daily Consumption:(KWh) Monthly Consumption:(KWh) Total Consumption:(KWh) Click Done Can Switch prepayment, Switch prepayment, Click "expense" and charge energy. and click "charge. in the home energy" to charge. page. 6. Set Scheduled Programs charge energy and save. finish charge energy Click "Schedule" in the home page. Click "Add" 7. Setting Over-current alarm Set the time: Hour and Minute, Click" Repeat" to Set the Date Select the Date, From Sun. to Sat. Select ON or OFF. Add more schedules required. Click "Setting" in the home page. Click "Over-current alarm." Click "Threshold Input the current, Setting 60A > ", can set 10A to 60A, to set the Over Current. Click "Confirm" 8. Setting Over-voltage alarm and Under voltage alarm Click "Control to open this function. Click "On.:)" in the home page Click "Confirm 0 " The Device is off. Click "On " in the home page The Device is on Click "Setting" in the home page Click "Over-voltage alarm" or "Undervoltage alarm" Click "Threshold Setting", to set the Over voltage or Input the voltage, Click "Confirm" 2 Click "Control to open this function. WiFi Smart Meter 9. Set Insufficient balance warning Operating Instructions WiFi Smart Meter 13. Share Device Operating Instructions Click "Setting" in the home page. Click "Insufficient balance warning" 10. Set Lack of Power Alarm Click "Threshold Setting ", to set the Minimum balance. Input the Minimum balance value, click "Confirm." Click "Control to open this function. Click "Setting" in the home page Click "Lack of Power Alarm 11. Modify Device Icon Click "Timer" in the home page Click "Share Device" Click "Add Sharing", Input the cell phone. number, and click "Done." 14. Add to Home Screen Click "Timer" in the home page. Specification Click "Add to Home Screen". Click the button at the bottom of the screen. · Rated Voltage: 100-240VAC 50-60Hz · Rated Current: 5A 250VAC(Cos=1) · Maximum current: 50 Hz/ 60A · Contact Configuration: 1NO(SPST-NO) · Wi-Fi Frequency: 2.4GHz · Pulse frequency: 1200imp / kwh · Ambient temperature range: -10° (+60°C) · Can set 30 ON/OFF programs per day or per week. · Can be shared with 20 users by Mobile App. Click the Add to Home Screen Click the "Add" to Home Screen Feature · Under normal conditions of use, the life of LCD screen is more than 10 years. · Single phase type multi-function smart meter designed to measure single phase 2 wire AC active energy and other parameters. · APP can be used to remotely monitor readings and control ON/OFF. · Ultra-bright long-life LED indicator. 3 4Microsoft Word for Microsoft 365