BIGBIG WON Blitz Controller User Manual

01. Name of Each Part

The BIGBIG WON Blitz controller features the following components:

• Left Joystick (LS): For primary analog control.
• D-Pad: Directional pad for digital input.
• Left Light Strip: Indicator light on the left side.
• Channel Indicator: Shows connection status or player number.
• [Home button]: For accessing system menus or powering on/off.
• TURBO Button: Activates rapid-fire function.
• Mapping Button (FN): Used in combination with other buttons for special functions.
• M1, M2, M3, M4 Buttons: Programmable back buttons.
• ZR Button: Right trigger button.
• R Button: Right shoulder button.
• Screenshot Button: Captures screenshots.
• + Button: Plus button, often used for menu navigation.
• A/B/X/Y Buttons: Standard face buttons.
• Right Joystick (RS): Secondary analog control.
• Right Light Strip: Indicator light on the right side.
• Configuration Button: Used for switching onboard configurations.
• MACRO Button: Used for macro recording.
• ZL Button: Left trigger button.
• L Button: Left shoulder button.
• Type-C Port: For wired connection and charging.

Package Contents: Blitz Controller *1, User Manual *1, Quality Certificate *1, USB Cable *1.

Supported Platforms: Switch, Windows 10/11, Android, iOS.

02. Turn On/Off

To turn the controller on or off, press and hold the [Home button] for 3 seconds.

03. Connection

The controller supports two connection methods: Bluetooth and wired.

Bluetooth Connection:

After powering on the controller, press the top pairing button for 3 seconds. The [HOME indicator] will flash quickly, indicating pairing mode. The [HOME indicator] will turn solid once the connection is successful. (In Switch mode, the illuminated channel indicator reflects the controller's order on the console).

Wired Connection:

After powering on the controller, use a Type-C cable to connect the controller to the console.

Note: The controller is compatible with Switch and Xinput modes. Ensure you switch to the correct mode for your console. Switch mode is the default.

For Steam: To connect with Steam, enable "Xbox Configuration Support" in Steam's "Settings > Controller > GENERAL CONTROLLER SETTINGS". Otherwise, the controller may not be recognized in games.

For Switch (Wired): After connecting via a wired connection, enable "Pro Controller Wired Communication" in "System Settings > Controller and Sensors".

04. Mode Switch

The controller is compatible with Switch and Xinput modes. Switch to the corresponding mode for proper usage.

• To Switch Mode: Press and hold the [A button] + [Home button] for 3 seconds. The [HOME indicator] will turn red, indicating Switch mode.
• To Xinput Mode: Press and hold the [B button] + [Home button] for 3 seconds. The [HOME indicator] will turn green, indicating Xinput mode.

Notice: For connecting to iOS and Android mobile devices via Bluetooth, please ensure the controller is in Xinput mode.

05. Remap Buttons

The controller features four remappable buttons ([M1], [M2], [M3], [M4]) for custom key mapping.

Set Key Mapping:

1. Press the [Mapping Button (FN)] + one of the [M1/M2/M3/M4 buttons]. The [FN indicator] will show a breathing status, indicating key mapping mode.
2. Press the target button you wish to map to the selected M button. The [FN indicator] will flicker twice, confirming successful mapping.

Clear Single Key Mapping:

Hold the button you wish to clear mapping from ([M1/M2/M3/M4]) and double-click the [Mapping Button (FN)]. The [FN indicator] will flash twice, confirming the mapping is cleared.

Clear All Key Mapping:

Double-click the [Mapping Button (FN)]. The [FN indicator] will flash twice, confirming all mappings are cleared.

06. Turbo Function

The controller supports turbo settings for the following buttons: [A/B/X/Y buttons], [D-Pad], [L/R/ZL/ZR buttons], and [M1/M2/M3/M4 buttons].

Set Turbo:

Hold the [Mapping Button (FN)] + the "target key". The [FN indicator] will flicker twice, indicating the function is enabled. (When Turbo is active, the [FN indicator] flickers at the current turbo frequency).

Clear Single Turbo:

Hold the "target button" and double-click the [Mapping Button (FN)]. The [FN indicator] will flicker twice, indicating the function is disabled for that button.

Clear All Turbo:

Double-click the [Mapping Button (FN)]. The [FN indicator] will flicker twice, confirming all Turbo functions are disabled.

Turbo Frequency Adjustment:

Press [FN button] + [right arrow] to cycle through three frequencies: 5Hz, 10Hz, and 20Hz. The default frequency is 5Hz.

07. Macro Recording

The controller supports macro recording. Each macro must be bound to a back button ([M1/M2/M3/M4]) as a trigger. Supported keys for macros include [A/B/X/Y buttons], [D-Pad], [L/R/ZL/ZR buttons], [Left joystick], [Right joystick], and joystick clicks.

Record Macro:

1. Press and hold the [Mapping Button (FN)] + one of the [M1/M2/M3/M4 buttons] for 3 seconds. The [FN indicator] will show a breathing status, indicating macro recording mode.
2. Press the keys you want to record for the macro.
3. Click the assigned M button again to finish recording. The [FN indicator] will flicker twice, confirming the recording is complete. (While a macro is being executed, the [FN indicator] will flash slowly until the operation finishes).

Clear Single Macro:

Press the target M button ([M1/M2/M3/M4]) and double-click the [Mapping Button (FN)]. The [FN indicator] will flicker twice, confirming the macro for that button is cleared.

Clear All Macros:

Double-click the [Mapping Button (FN)]. The [FN indicator] will flicker twice, confirming all macro functions are disabled.

08. Onboard Configuration

Switch between four onboard configurations.

Switch Mode:

Click the [Configuration button]. The [channel indicator] will change from red to white, entering configuration switch mode. The four indicators in this mode display the four different onboard configurations.

Click the [Configuration button] again to cycle through the configurations. The indicator lights will switch in order from top to bottom, with the first indicator representing the first configuration, and so on.

If there is no activity for 5 seconds in configuration switch mode, the mode will automatically exit, the indicator will change from white back to red, returning to the channel indicator status.

Xinput Mode:

In Xinput mode, there is no channel indication function; the indicator light is white by default, showing the current onboard configuration. In this mode, clicking the [Configuration button] directly switches the configuration.

Reset Configuration:

Press and hold the [Configuration button] for 3 seconds to clear all settings of the current configuration.

09. Joystick Deadzone

The controller is designed for competitive gaming, with factory settings featuring zero deadzone for enhanced control accuracy. To accommodate user preferences, two deadzone options are available: 0 and 10.

Settings:

Press and hold the [FN button] + push either the [Left joystick (LS)] or [Right joystick (RS)] to switch between deadzone settings of 0 and 10.

10. Joystick Calibration

If your joystick drifts or cannot reach its maximum value, you can calibrate it using the following method:

1. Press and hold the [+] and [-] buttons simultaneously for 3 seconds. The [left and right light strips] will breathe in orange, indicating entry into calibration mode.
2. Push the joysticks to their extreme limits and rotate them at a constant speed. Repeat this operation 3-5 times for each joystick.
3. Finally, press the [+] and [-] buttons simultaneously again. The [left and right light strips] will double flash and then turn off, indicating that calibration is complete.

11. Gyroscope Calibration

If the controller's gyroscope is drifting, you can calibrate it as follows:

1. Place the controller on a horizontal surface. Press and hold the [+] button and the [Screenshot button] simultaneously. The [left and right light strips] will breathe in purple, indicating entry into calibration mode.
2. Wait for a moment. When the [left and right light strips] double flash in purple, calibration is complete.

12. Vibration Adjustment

The controller offers four levels of vibration adjustment for the trigger motors: Strong, Medium, Weak, and Off.

Settings:

Press and hold the [FN button] + [right arrow] to circularly switch between the four vibration levels.

13. Battery Instructions

Low Battery Warning: When the battery is critically low, the [light strip] on both sides of the controller will flash red twice per second for 10 times, repeating this alert every five minutes.

Charging State: After connecting to a power supply, the [light strip] will show a red breathing effect, indicating the charging state. The [light strip] will return to its normal state once charging is finished.

Charging Stand: The charging stand shows no light indication in standby status. When the controller is connected to the stand, the stand's lights will turn on, signifying that the controller is charging. A solid green light on the stand indicates the controller's battery is full.

14. Detailed Functional Operation Instructions

For more detailed instructions, please visit the BIGBIG WON Official Website > Support page:

https://www.bigbigwon.com/support/

15. Your Rights

The controller comes with a 12-month limited warranty from the date of purchase.

Welcome to the BIGBIG WON Community

The BIGBIG WON community is designed to connect individuals seeking a competitive edge. Join our Discord server and follow our social channels for the latest product offerings, exclusive event coverage, and opportunities to win BIGBIG WON hardware.

Social Channels:

• Facebook: [Link to Facebook page - not provided in OCR]
• YouTube: [Link to YouTube channel - not provided in OCR]
• Twitter/Instagram: @BIGBIG WON

Visit the official support page for detailed video tutorials, FAQs, user manuals, and APP downloads: www.bigbigwon.com/support/

BIGBIG WON Discord

BIGBIG WON Support