Manuals+

Vantiva Cable Modems and Gateways: Quick Start Guide

Model Information: CGA438APLT2, SBG50, G95SBG50

Introduction

Follow the instructions in this Quick Start Guide to connect your cable modem or gateway.

Before You Start

Carefully read the Safety Instructions and Regulatory Notices document included in your package before continuing with the installation of your cable modem or gateway.

Important: Before you connect your device, establish an Internet service account with your preferred Internet service provider. When establishing an account, your Internet service provider may ask you to provide information listed on the device label, such as the device serial number (S/N) or MAC address.

Connection Steps

  1. CABLE: Connect the RF coaxial cable from the wall outlet to the RF IN connector on the back of the device.
  2. ETHERNET: Connect your computer to the Ethernet port on the back of the device. If your device has more than one Ethernet port, you may connect additional computers or other networking devices to the extra Ethernet ports.
  3. TELEPHONE (optional): If your device supports digital telephone service (VoIP), connect one end of a telephone cable to a telephone outlet in your home or to a telephone or fax machine. Connect the other end of the cable to the first TELEPHONE port on the back of the device. The first port is labeled 1 or 1/2 depending on the device model.
  4. POWER: Connect the barrel end [power-adapter-connector] of the power adapter (included) to the POWER input on the back of the device. Then, plug the adapter into a wall outlet. If your device has a power switch (ON/OFF) on the back of the device, make sure that the switch is in the ON position.
  5. Wait for the LED on the front of the device (under the "Vantiva" logo [Vantiva logo]) to be solid white and the POWER and ONLINE LEDs on the back of the device to stop blinking and remain on continuously green. It may take up to 10 minutes for all LEDs to stop blinking.

You are now ready to surf the Internet and use other networked devices.

Troubleshooting

Problems? If you encounter problems, make sure that all connections are secure. For further assistance, contact your service provider.

Models: G95SBG50, G95SBG50 sbg50, SBG50 Cable Modems and Gateways, SBG50, SBG50 Modems and Gateways, Cable Modems and Gateways, Modems and Gateways, SBG50 Modems, SBG50 Gateways, Modems, Gateways

File Info : application/pdf, 3 Pages, 61.61KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html

References

Adobe InDesign 20.2 (Windows) Adobe PDF Library 17.0

Related Documents

Preview Vantiva Cable Gateway Safety and Regulatory Information
Comprehensive safety instructions, regulatory notices, and usage guidelines for Vantiva cable gateways, including FCC compliance and environmental information.
Preview Vantiva USA LLC FCC Agent Authorization for G95601TX
Vantiva USA LLC authorizes Sporton International Inc. as their agent for FCC equipment authorization matters for the product with FCC ID G95601TX.
Preview Vantiva BGW620-700 Residential Gateway User Guide
User guide for the Vantiva BGW620-700 Residential Gateway, covering setup, technical specifications, LED functionality, accessories, mounting instructions, and safety information.
Preview Vantiva DOCSIS 4.0 Residential Gateway FCC Radio Test Report
This FCC Radio Test Report details the compliance of the Vantiva DOCSIS 4.0 Residential Gateway, model numbers CGM601TCOM and CGM601TCOX, with FCC Part 15 Subpart E standards. The report covers conducted and radiated emission tests, bandwidth measurements, power spectral density, and antenna requirements.
Preview Vantiva COM3000 Integrator's Installation Manual
Comprehensive installation and configuration guide for the Vantiva COM3000 system, covering chassis setup, card installation, signal input, network configuration, and troubleshooting for integrators. Details COM400 chassis, COM51 cards, QAM modulators, and DIRECTV integration.