Mi-Light Color Temperature Remote Control

Model No.: FUT006 / FUT007

Features

This manual describes two types of remote controls with identical functions. They adopt the world-wide used 2.4GHz frequency and GFSK control method, featuring low power consumption, long-distance transmission, strong anti-interference, and fast communication rates. These remotes can control specified Mi-Light / MiBoxer smart lights, allowing for color temperature and brightness adjustments.

Parameters

Product Name	Model No.	Voltage	Transmission Frequency	Modulation Method	Transmitting Power	Standby Power Consumption	Control Distance	Size
Color Temperature Remote Control (Rotating Wheel)	FUT006	3V (AAA * 2PCS)	2.4GHz	GFSK	6dBm	20uA	30m	5321110.5mm
Color Temperature Remote Control (Full Button)	FUT007	3V (AAA * 2PCS)	2.4GHz	GFSK	6dBm	5uA	30m	5321110.5mm

Product Key Diagram

The remote controls feature distinct button layouts for operation.

FUT006 (Rotating Wheel)

The FUT006 remote features a rotating wheel for brightness and color temperature control. The layout includes:

Top Area: Brightness / Color temperature adjustment via rotating wheel.
Middle Section: Zone ON button, Zone OFF button.
Bottom Section: Mi-Light logo, Model No. FUT006, Master ON button, Master OFF button, Brightness + button, Cool white + button, Brightness - button.
Note: Pressing the middle button once switches between brightness adjustment and color temperature adjustment. Four presses of the 'Link light' button are used for pairing.

Dimensions: Approximately 53mm wide, 21mm thick, and 110.5mm long.

FUT007 (Full Button)

The FUT007 remote features dedicated buttons for control. The layout includes:

Top Section: Brightness +, Cool white +, Brightness - buttons.
Middle Section: Zone ON button, Zone OFF button.
Bottom Section: Mi-Light logo, Model No. FUT007, Master ON button, Master OFF button.
Note: Four presses of the 'Link light' button are used for pairing.

Dimensions: Approximately 53mm wide, 21mm thick, and 110.5mm long.

Operation Instructions

Master Control: To dim all dual white lights at once or change the color temperature for all connected lights, first press the 'Master ON' button. Then, perform the desired adjustment.

Zone Control: To control individual lights or a specific zone, first press the 'Zone ON' button for that zone. Second, set the adjustment for color temperature or brightness.

Night Light Mode:

To turn on the night light mode of a single dual white light, press and hold the 'Zone OFF' button for one of the 4 zones.
To turn on all lights in night light mode, press and hold the 'Master OFF' button.

FUT006 Specific Operation

For the FUT006 remote control, the default mode is brightness adjustment. Rotating the wheel from left to right increases brightness, and from right to left decreases brightness. To switch to adjusting color temperature, press the middle button once. Rotating the wheel from left to right makes the light cooler, and from right to left makes it warmer.

Linking and Unlinking Lights

Remark: Lights can be operated after successful linking with the remote.

Link Code Procedure

This procedure pairs a light with the remote.

Switch off the light. After 10 seconds, switch it on again.
When the light is on, short press any zone button (Zone ON or Zone OFF) 3 times within 3 seconds.
The light blinking 3 times slowly indicates that the linking is done successfully.

If the light does not blink slowly, the linking has failed. Please switch off the light again and repeat the above steps.

Unlink Code Procedure

This procedure removes a light's pairing with the remote.

Switch off the light. After 10 seconds, switch it on again.
When the light is on, short press the 'Link/Unlink button' 5 times within 3 seconds.
The light blinking 10 times quickly indicates that the unlinking is successful.

Note: Unlinking must be performed on the same zone as the original linking.

If the light does not blink quickly, the unlinking has failed. Please switch off the light again and repeat the above steps to unlink.

Grouping of Several Lights

You can add an endless number of lights to a zone on the 4-channel remote by linking the lights to different zones. This allows for flexible creation of different group combinations. The document provides visual examples of grouping, illustrating how multiple lights can be assigned to specific zones.

Remark:

Users can reprogram freely as needed. One remote can control countless lights or controllers, but one light or controller can only be controlled by a maximum of four remotes.
Please check battery installation and controller power status (fully discharged if necessary) when programming after switching the power off and on.

Attention and Warnings

This remote control is designed to work only with specified Mi-Light / MiBoxer products. Not all Mi-Light / MiBoxer series products are compatible with this remote.
If the indicator light on the remote blinks quickly during use, please change the battery promptly. Avoid using poor-quality batteries, as leaking battery liquid can damage the remote.
This 2.4G remote is a precise electronic product. Do not use it in humid, high-temperature, dusty, or high-voltage environments. Store it in a dry, indoor environment free from static electricity.
Avoid using the remote in areas with wide-range metal surfaces or strong electromagnetic waves, as this can negatively affect the control distance.

Certifications: CE, UK, CA, RoHS

Origin: Made in China

	Mi-Light Color Temperature Remote Control FUT006/FUT007 User Manual Comprehensive guide to the Mi-Light Color Temperature Remote Control models FUT006 and FUT007, covering features, parameters, operation, linking, unlinking, and grouping for smart lighting systems.
	Mi-Light FUT006/FUT007 Color Temperature Remote Control User Manual User manual for Mi-Light FUT006 and FUT007 Color Temperature Remote Controls, detailing features, parameters, operation, linking, and grouping for Mi-Light/MiBoxer smart lighting systems.
	Mi-Light FUT006/FUT007 Color Temperature Remote Control User Manual Comprehensive user manual for the Mi-Light FUT006 and FUT007 Color Temperature Remote Controls. Learn about features, product diagrams, linking/unlinking instructions, grouping lights, and important attention points for your smart lighting system.
	Mi-Light FUT006/FUT007 Color Temperature Remote Control User Manual User manual for Mi-Light/MiBoxer FUT006 (Rotating Wheel) and FUT007 (Full Button) 2.4GHz color temperature remote controls. Includes features, parameters, linking/unlinking instructions, and grouping guide.
	Mi-Light FUT007 Color Temperature Remote Control - User Manual User manual for the Mi-Light FUT007 4-Zone CCT Remote Control, detailing features, operation, linking/unlinking, grouping, and important attention points for smart lighting.
	Mi-Light FUT006/FUT007 Color Temperature Remote Control User Manual User manual for Mi-Light FUT006 and FUT007 color temperature remote controls, detailing features, product diagrams, linking/unlinking instructions, grouping of lights, and important attention points.
	Mi-Light Smart LED Remote Controls: FUT089 and Other Models Explore the range of Mi-Light smart LED remote controls, including the 8-Zone RGB+CCT FUT089, and other models like FUT006, FUT007, FUT091, FUT092, FUT095, FUT096, FUT098, and FUT090, featuring various zone controls, color options, and dimming capabilities.
	Control Remoto de Temperatura de Color Mi-Light FUT006/FUT007 - Manual de Usuario Manual de usuario para los controles remotos de temperatura de color Mi-Light/MiBoxer FUT006 y FUT007. Aprenda sobre características, emparejamiento, desemparejamiento, agrupación y precauciones importantes de uso.