Mi-Light FUT006/FUT007 Color Temperature Remote Control User Manual

Features

This manual describes two types of remote controls with same functions. Adopt world-wide used 2.4GHz frequency, GFSK control method, with the features of low power consumption, long distance transmitting, strong anti-interference and fast communication rate. Can control specified Mi-Light / MiBoxer smart light with color temperature and brightness changing.

Parameters

Product Name: Color Temperature Remote Control (Rotating Wheel)

Model No.: FUT006

Voltage: 3V(AAA * 2PCS)

Transmission Frequency: 2.4GHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Standby Power Consumption: 20uA

Control Distance: 30m

Size: 53*21*110.5mm

[Diagram: Outline of FUT006 remote control showing dimensions: 53mm width, 21mm depth, 110.5mm height.]

Product Name: Color Temperature Remote Control (Full Button)

Model No.: FUT007

Voltage: 3V(AAA * 2PCS)

Transmission Frequency: 2.4GHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Standby Power Consumption: 5uA

Control Distance: 30m

Size: 53*21*110.5mm

[Diagram: Outline of FUT007 remote control showing dimensions: 53mm width, 21mm depth, 110.5mm height.]

Products Key Diagram

FUT006 Remote Control Layout:

• Top Button: Master ON [power symbol]
• Second Button: Master OFF [power symbol]
• Central Rotating Wheel: Controls Brightness / Color temperature. Press once to change to color temperature.
• Bottom Row Buttons (4): Zone ON (labeled 1, 2, 3, 4) and Zone OFF.
• Functionality: 4x(un) Link light

FUT007 Remote Control Layout:

• Top Button: Master ON [power symbol]
• Second Button: Master OFF [power symbol]
• Central Rotating Wheel: Controls Brightness / Color temperature. Press once to change to color temperature.
• Bottom Row Buttons (4): Zone ON (labeled 1, 2, 3, 4) and Zone OFF.
• Functionality: 4x(un) Link light

Operating Instructions (applicable to FUT007 and likely FUT006):

• To dim all dual white lights at once or change the color temperature, first press 'Master ON'.
• To control individual lights, first press 'Zone ON'. Then, set the adjustment for color temperature or brightness.
• To turn on the night light mode of a single (dual white) light, press and hold the 'Zone OFF' button for one of the 4 Zones.
• To turn on all lights in night light mode, press and hold 'Master OFF'.
• For FUT006 remote control: The default mode adjusts brightness by rotating the wheel (left to right: brightness up, right to left: brightness down). Switch to color temperature adjustment by pressing the middle button once (left to right: cooler, right to left: warmer).

Link Code / Unlink Code

Remark: The light can be working after linking with the remote.

Link Code

Step 1: Switch off the light, after 10 seconds switch on again.

Step 2: When the light is on, short press any zone's Link/Unlink button 3 times within 3 seconds.

Step 3: The light blinks 3 times slowly, indicating successful linking.

⚠️ If the light does not blink slowly, linking failed. Please switch off the light again and repeat the steps.

[Diagram: Visual representation of the linking process: a light bulb connected to power, then the remote control, then the light bulb indicating success.]

Unlink Code

Step 1: Switch off the light, after 10 seconds switch on again.

Step 2: When the light is on, short press the Link/Unlink button 5 times within 3 seconds.

Note: Unlinking must be performed for the same zone used during linking.

Step 3: The light blinks 10 times quickly, indicating successful unlinking.

⚠️ If the light does not blink quickly, unlinking failed. Please switch off the light again and repeat the steps.

[Diagram: Visual representation of the unlinking process: a light bulb connected to power, then the remote control, then the light bulb indicating success.]

Grouping of several lights

You can add an endless number of lights to a zone on the 4-channel remote by linking them to different zones. This allows for completely flexible group combinations. Below are some grouping examples.

[Diagram: Three visual examples of light grouping. Example 1 shows three lights assigned to zone 1 and one light to zone 2. Example 2 shows two lights in zone 1 and one in zone 2. Example 3 shows one light in zone 1 and two in zone 2. Each example includes representations of ceiling lights/lamps and corresponding remote control zone indicators.]

Remark

• Users can reprogram freely as needed. One remote can control countless lights or controllers, but one light or controller can only be controlled by a maximum of four remotes.
• Please check battery installation and ensure the controller is fully discharged (power off) before programming after switching off and on.

Attention

• This remote control is compatible only with specified Mi-Light / MiBoxer products; not all Mi-Light / MiBoxer series may work with this remote.
• If the indicator light blinks quickly during use, please change the battery promptly. Avoid using poor quality batteries to prevent leakage that could damage the remote.
• This 2.4G remote is a precise electronic product. Do not use it in humid, high-temperature, dusty, or high-voltage environments. Store it in a dry, indoor environment free from static electricity.
• Do not use the remote near wide-range metal objects or strong electromagnetic wave areas, as this may adversely affect the control distance.