UMIDIGI G3 Max Smartphone

About This Manual

Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valuable time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with better user experience.

Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!

• VK: vk.com/umidigi
• YouTube: youtube.com/umidigi
• Facebook: facebook.com/Umidigi
• Twitter: twitter.com/umidigi
• Instagram: instagram.com/umidigi

Product Overview

Front View

3.5 mm Headphone jack

Receiver

Mic 2

Light/Proximity Sensor

Front camera

Screen

Bottom View

Mic 1

Type-C USB

Speaker

Power Button

Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.

Rear View

SIM/TF Slot

50MP Main Camera

Depth-of-field Camera

50MP AI CAMERA

Dual LED Flash

UMIDIGI Logo

Side View

Volume+ Button

Volume- Button

Fingerprint Scanner & Power Button

Volume Button

Short press to adjust the volume or to mute incoming calls.

Card Insert Manual

Insert Nano-SIM Card

Please face the chip side of the Nano-SIM card down when inserting into the slot. Be aware of the direction of the cut edge when placing the Nano-SIM card into the slot.

Reminder: Please use a standard Nano-SIM card. Do not use a non-standard card that is hand-cut, to prevent damage to the SIM slot and card tray, and card-rejection situations that may cause damage to the phone.

Diagram: Two diagrams showing Nano SIM card placement for 2 Nano SIM cards, and for 1 Nano SIM card and 1 TF card.

TF Card Installation

Please place the metal contact of the TF card down, be aware of the direction of the cut edge. Place the card onto the tray and insert into the device.

Reminder: Please turn off the phone before changing or replacing the TF card. TF card does not come with the phone, please purchase separately. Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble to avoid scratching the phone.

Dual-SIM Management

Please choose which SIM card slot to be the main one for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting > Network & Internet > Mobile network > Preferred network type.

Fingerprint Identification

You can unlock the screen by fingerprint ID function. Click Setting > Security & Location > Fingerprint, and enter your fingerprint information by following the on-screen instructions.

Reminder: Please ensure your finger is clean and dry when providing your fingerprint information to the phone. Please use the pad of your finger for fingerprint information. When unlocking the phone by fingerprint, place your finger pad on the touch ID sensor for about a second.

Network Connection

Connecting WLAN

Navigate to Settings > Network & Internet > Wi-Fi. When WLAN is on, a list of available WiFi connections will appear. Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. For a public network, just click Connect. When the network shows "connected", it is available to use.

Bluetooth Function

Navigate to Settings > Connected devices > Bluetooth. Enable the Bluetooth function by clicking the Menu Button then select "Refresh". The phone will search for available Bluetooth devices for pairing and list them on the screen. Click on the one you want to pair with, then click "Pair" on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.

Reminder: Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions.

WLAN Hot-spot Setting

Navigate to Settings > Network & Internet > Hotspot & tethering > Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot, enter your desired username in "Network Name" and password, then click Save. Other devices can use the WLAN hot-spot by searching and entering the password.

Reminder: Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot-spot depends on the signal strength and the connected devices.

Camera

Aim the camera at the shooting object; the phone will start focus automatically. Alternatively, click on the screen to choose the object you want to focus on, then click the "Capture" icon to take photos. You can also choose other modes such as video recording, beautifying, and panorama to take photos/videos.

Instructions for Dual-Card Standby

"Dual card, dual standby, single pass" means you can insert two SIM cards and have them both "standby", but cannot make phone calls at the same time. During standby, both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

Security Information

Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI disclaims responsibility for performance problems or incompatibility caused by third-party applications, registry editing, or OS software modification. Customizing the OS may cause the device or some applications to fail to work properly.

Please protect the device or battery from extreme cold/hot conditions. Extreme temperatures can lead to deformation of the phone and reduce charging capacity and battery life.

Please use only UMIDIGI-approved batteries and chargers. Incompatible batteries and chargers may damage the phone. Please follow local regulations when disposing of used batteries and phones.

Do not place the battery or phone inside heating devices such as microwaves, ovens, or radiators. The battery may explode if it gets too hot. Do not crush or pierce the battery. Prevent the battery from excessive external pressure, which may cause internal short circuits and overheating.

Specifications

Basic Information

• Model: G3 Max
• Operating System: Android™ 13
• CPU: T606 2xCortex-A75+6xCortex-A55 1.6GHz
• GPU: Arm Mali G57 1Cocre @650MHz
• RAM: 8GB
• ROM: 128GB
• Battery: 5150mAh
• Touch ID: Side Fingerprint

Display

• Screen Size: 6.6 inch
• Resolution: 2408x1080 Pixels
• Touch: Capacitive multi-touch

Cameras

• Rear Camera: 50MP+2MP Camera
• Front Camera: 8MP Camera

Connection (I/O)

• Band: LTE FDD:B2/5/7/12, LTE TDD:B41, WCDMA:B2/5, GSM:B2/5
• SIM/TF card: 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card
• WIFI: IEEE802.11 ac/a/b/g/n
• Bluetooth: Bluetooth 5.0
• GNSS: GPS, Beidou, Glonass, Galileo
• FM: Yes
• Earphone Port: 3.5mm
• USB Port: Type-C

Other Features

• Video File Format: 3GP/MPEG4, etc.
• Audio File Format: WAV/MP3/AAC/AMR/MIDI, etc.
• Card Extend: Support TF card up to 256 GB
• Language: Support Multi-language
• Sensor: G-Sensor, P-Sensor, L-Sensor, Compass

In the box

• 1x Phone
• 1x Screen Protector (pre-applied)
• 1x Phone Case
• 1x Type-C Cable
• 1x Power Adapter
• 1x SIM Tray Ejector
• 1x Quick Start Guide

Android is a trademark of Google LLC.