Cambridge Casual Teak Dining Chair Assembly Instructions

Model: IT-121697T

Scan for assembly video. A gift is waiting for you!

Customer Service Information

Email: info@cambridge-casual.com for assembly tips, damage reports, or parts requests. For faster response, please provide item number, code for missing parts, purchase receipt, and pictures of damaged parts.

Toll-free number: 1-888-287-4275 (Monday to Friday, 9:00 am to 5:00 pm CST)

General Information & Tips

• Read assembly instructions before assembling.
• Assemble on a non-abrasive surface like carpet to avoid damage.
• Ensure all bolts are tightly fastened before use.
• This chair is not for commercial use.
• Verify all parts are present before beginning assembly. Wait until all steps are completed before tightening bolts.

Tools Required:

• 8" Philips screwdriver (for tightening bolts and screws)
• Rubber Mallet (for tapping wooden caps)

Parts and Hardware List

Assembly Steps:

Step 1

Attach the back support (B), front apron (D1), and back apron (D2) into the side frames (A1 & A2). Secure using 1 1/2" bolts (E). DO NOT TIGHTEN BOLTS YET.

Step 2

Attach the seat (C) to the previous assembly, starting with the front side.

Step 3

Secure the seat (C) using 1" screws (F).

Step 4

Ensure all parts are correctly connected and tighten all bolts and screws using a screwdriver. Tap in the wooden caps (G) to cover the bolt heads using a rubber mallet. Please tap carefully to avoid damaging the wood frame.

The chair is now ready for use.

Cambridge Casual Extendable Dining Table Assembly Instructions

Model: IT-320617T

Scan for assembly video. A gift is waiting for you!

Customer Service Information

Email: info@cambridge-casual.com for assembly tips, damage reports, or parts requests. For faster response, please provide item number, code for missing parts, purchase receipt, and pictures of damaged parts.

Toll-free number: 1-888-287-4275 (Monday to Friday, 9:00 am to 5:00 pm CST)

General Information & Tips

• Read assembly instructions before assembling.
• Assemble on a non-abrasive surface like carpet to avoid damage.
• Ensure all bolts are tightly fastened before use.
• This table is not for commercial use.
• Verify all parts are present before beginning assembly. Wait until all steps are completed before tightening bolts.

Tools Required:

• Allen wrench (included in hardware list)

Parts and Hardware List

Assembly Steps:

Step 1

Put the table (A) face down on a flat non-abrasive surface. Attach the leg frames (B) into the table top (A) and secure using washers (G), spring washers (F), and 2 3/4" bolts (D). DO NOT TIGHTEN ALL BOLTS YET. Next, attach the cross bar (C) into the pre-assembled leg frames (B) and insert 1 1/2" bolts (E) into predrilled holes. Make sure all parts are correctly connected and tighten all bolts completely using the allen wrench. Turn the table upright.

Step 2

To extend: Pull the table top from each end. Unfold the leaves. Push both ends of the table top together. Ensure metal pins are matched with holes as shown.

Step 3

Put the umbrella hole plug (H) into the hole of the table top (A) as shown.

Care Maintenance

Cambridge Casual collections are meticulously crafted using sustainably harvested wood, cultivated under rigorous governmental regulations. This approach promotes sustainability and guarantees adherence to legal trade practices.

Our collections are designed to withstand the elements, but proper care and maintenance are essential for longevity. Follow this guide for cleaning and maintenance recommendations.

General Outdoor Care

• Regular cleaning keeps furniture looking its best.
• Use furniture covers or store in a covered area during heavy rain, winter, or inclement weather.
• Ensure furniture and cushions are clean and dry before covering or storing.
• Remove wet cushions from the frame and air dry to prevent mold and mildew.
• Avoid storing furniture near central heating or cooling vents to prevent excessive wood drying.
• Do not allow liquids to stand on furniture or cushion surfaces.
• Do not place hot items directly on furniture surfaces.
• Use a padded barrier when writing on furniture.
• Do not leave furniture in puddles of water or on wet ground.

Unfinish Natural / Finely Sanded Teak

Characteristic

• Each piece may exhibit unique graining and color variations due to the organic nature of teak.
• Small splits, knots, and joint lines are natural characteristics that contribute to the piece's character without affecting quality.
• Natural teak develops a silver-gray patina as it weathers. Teak sealer or oil can be applied to maintain the original honey brown color.
• Teak expands and contracts with climate shifts, which may cause hairline cracks in assembly joints or the wood grain. This does not compromise structural integrity.
• Mildew may form on the surface but does not impact the wood's durability or lifespan and can be removed with simple cleaning.

Care & Maintenance

• Clean teak furniture with warm water and mild dish soap. Gently scrub surfaces following the grain. Rinse thoroughly and pat dry. Allow remaining moisture to air-dry.
• For tougher stains, use a mixture of 1 cup chlorine bleach, 1 cup laundry detergent, and 1 gallon of water. Apply with a non-metallic, soft-bristle brush. Let sit for 5-10 minutes (or longer for stubborn stains). Rinse thoroughly with clean water.
• Always start with a mild cleaning solution. If ineffective, try a stronger concentration or a store-bought teak cleaner.
• For remaining stains, lightly sand affected areas with 120-grit sandpaper until the stain disappears.

Weathered Teak

Our weathered teak finish is hand-applied using a wire brush to distress the wood, followed by a multilayered painted finish. Similar to all painted finishes, it will fade and wear when exposed to outdoor elements. As the finish wears, the underlying natural teak wood will become exposed and turn grey. This process is accelerated if furniture is left untreated or uncovered. To preserve the weathered teak finish, move it to covered storage or use a furniture cover during extreme weather or winter seasons.

Spa Collection Teak

Water and stain guard is applied. Maintain with solvent-based polyurethane protective coating every six (6) months, or as recommended by the manufacturer. For everyday maintenance, clean with mild detergent and a clean cloth. Do not use chemical solvents.

Painted Hardwood

Apply water-based mild detergent for wood using a clean cloth every six (6) months. Do not use chemical solvents. Color/finish may fade over time due to sunlight and rain exposure. Store indoors or use a furniture cover during extreme weather or winter months.

Cushions

• Fabrics are breathable and water-resistant, but not waterproof. Remove and store cushions in a dry place when not in use or during inclement weather.
• If cushions become soaked, remove them from the frame and air dry them with the zipper facing down and unzipped to ensure proper drainage.
• Clean off dust and dirt periodically. Wipe spills immediately and spot clean stains promptly.
• Removable cushion covers can be machine-washed in cold water with mild laundry soap and air-dried.
• Periodically rotate cushions and pillows to distribute wear and prevent loss of shape.

Synthetic Rattan, Woven Polyrope, & Textilene

• Dust periodically with a soft, dry cloth. Use a non-metallic, soft bristle brush for loose dirt.
• For spot-cleaning, spray off debris with a hose and dry with a soft cloth.
• For thorough cleaning, use a mixture of mild soap and water with a non-metallic, soft-bristle brush. Do not use abrasive cleaners. Rinse thoroughly and dry with a soft cloth.

Proper care and maintenance will ensure your furniture lasts for many years.

1 Year Limited Warranty

This is a limited warranty. Regular care and maintenance are required. The warranty is valid for the original purchaser from an authorized retailer and is not transferable. If a product fails under the terms of this limited warranty, it will be replaced with a small fee, if applicable. For discontinued models, an item of similar quality and style will be offered.

1 Year Limited Frame Warranty:

• Wood frames are warranted against structural defects (e.g., broken frame) in material and workmanship.
• Wood frames require user maintenance. Natural color changes in wood over time are normal and expected as the material ages. Natural fading and changes in wood frames are not covered by this warranty.
• Components like chair feet are designed to wear and tear and are not considered part of the frame.

Finish, when applicable:

• The finish is warranted against peeling, cracking, or blistering for 1 year, provided the unit has not been scratched or abraded. Scratches and dents from normal wear and tear are not covered.

Fabric

• Fabrics and cushions are warranted against workmanship or material defects, including stitching, zippers, sling rails, cording, buttons, and cushion foam.
• The fabric and cushion are not warranted if deterioration, discoloration, or fading is due to exposure to chemicals, cleaning products, sun lotions, oil spills, improper maintenance, or extreme heat.

Warranty Exclusions:

• Furniture used for commercial, contractor, or non-residential purposes.
• Clearance items, display models, or items purchased "as is".
• Failure caused by unreasonable or abusive use, freight damage, acts of nature, vandalism, fire, lack of proper care and maintenance, or improper assembly.
• Exposure to severe weather (snowstorm, hail, heavy rainfall, flooding, hurricane, extreme heat).
• Accidental damage, repairs, or modifications by the customer.
• Straps and fabric against fading or discoloration from improper or accidental exposure to elements, oil spills, fluids, or chemicals.
• Hardware against corrosion or rusting.
• Buckling or splitting of tubing from exposure to water and freezing temperatures.
• Normal wear and tear, loss of use or time, inconvenience, money, travel, packaging, or other consequential or incidental damages.

The manufacturer's responsibility shall not exceed the value of the product.

The warranty starts on the date of purchase unless otherwise noted. Special circumstances may be considered.

For quality control purposes and verification, please provide the following documents for your claim:

• Packing slip / Invoice
• Additional documents (Photos or video) of damaged/defected/missing part
• Item number and part code (found on assembly instructions)

Claims WILL NOT BE PROCESSED without proper supporting documentation. Retain all damaged goods until the claim is concluded.

The terms of this warranty are subject to change without notice.