ASUS PRIME H470M-PLUS Motherboard Quick Start Guide

Motherboard Layout

Diagram showing the layout of the ASUS PRIME H470M-PLUS motherboard with key components labeled. Key areas include CPU socket (LGA1200), RAM slots (DIMM_A1, DIMM_A2, DIMM_B1, DIMM_B2), various connectors for system panel, power, storage, and expansion cards.

Step 1: Install the CPU

Instructions for installing the CPU into the LGA1200 socket. This involves opening the CPU socket lever, aligning the CPU with the socket markings, and carefully lowering the CPU into place before closing the lever.

Visual Description: A diagram shows a CPU being aligned with the socket and then secured by closing the retention lever.

Step 2: Install the CPU fan

Instructions for installing the CPU cooler and fan onto the motherboard. This typically involves attaching the cooler bracket and then securing the fan.

Visual Description: Diagrams illustrate attaching the CPU cooler bracket and then mounting the fan onto the bracket.

Step 3: Install memory modules

Instructions for installing RAM modules into the DIMM slots. Ensure modules are inserted correctly into the designated slots (DIMM_A1, DIMM_A2, DIMM_B1, DIMM_B2) with the clips on the sides.

Visual Description: Diagrams show RAM modules being inserted into DIMM slots, with arrows indicating the correct orientation and the clips engaging.

Step 4: Install storage devices

Instructions for installing storage devices, such as M.2 SSDs or SATA drives. The diagram shows locations for M.2 slots and SATA ports.

Visual Description: Diagrams show how to install an M.2 SSD into its slot and connect SATA devices.

Step 5: Install expansion card(s)

Instructions for installing expansion cards, such as graphics cards or other PCIe devices, into the appropriate PCIe slots.

Visual Description: A diagram shows an expansion card being inserted into a PCIe slot.

Step 6: Install system panel connectors

Instructions for connecting the system panel connectors (e.g., power switch, reset switch, HDD LED, power LED) to the motherboard headers.

Visual Description: Diagrams show the location of system panel headers on the motherboard and how to connect the front panel cables.

Step 7: Install ATX power connectors

Instructions for connecting the main ATX power supply connectors to the motherboard.

Visual Description: Diagrams show the main 24-pin ATX power connector and the 8-pin CPU power connector being plugged into the motherboard.

Step 8: Connect input/output devices

Instructions for connecting external devices such as monitors, keyboards, mice, and USB devices to the rear I/O panel.

Visual Description: Diagrams illustrate connecting various peripherals to the back of the computer.

Step 9: Power on the system and install operating system and drivers

Instructions on how to power on the system for the first time and proceed with installing the operating system and necessary drivers.

Visual Description: Diagrams show the power button being pressed and a computer screen displaying the boot process.

Notices

• Australia statement notice: Information regarding ASUS product warranties and consumer rights under the Australian Consumer Law. For assistance, contact ASUS Customer Service at 1300 2787 88 or visit http://www.asus.com/support/.
• India E-waste (Management) Rule 2016: Compliance statement regarding the prohibition of certain hazardous substances in the product.
• Regional notice for Turkey: Statement of compliance with AEEE Yönetmeliği.

Product Information

• Produced in: Manaus, Brazil (PRODUZIDO NO PÓLO INDUSTRIAL DE MANAUS)
• Printed in: China
• First Edition: March 2020
• Copyright: © ASUSTeK Computer Inc. All Rights Reserved