Part Names
Front Panel Components
- 1. Play/Pause Button [play/pause]: Used for play operations in music applications.
- 2. BLUETOOTH Button [bluetooth]: Used for pairing and connecting with BLUETOOTH wireless technology enabled devices.
- 3. Microphone Mute Button [mic-mute]: Toggles microphone mute on/off. The LED indicators show the status. Holding this button for 10 seconds performs a factory reset. The Google Assistant will not respond when the microphone is muted.
- 4. Microphone: Used for voice commands to the Google Assistant.
- 5. Volume Buttons [volume-up]/[volume-down]: Adjusts the volume from 0 to 50. LED indicators display the current volume level for 3 seconds. The brightness of the white LEDs indicates the volume level; they become brighter when increasing volume and dimmer when reducing it.
- 6. LED Indicators: Show the unit's status through colors and illumination patterns.
Back Panel Components
- 7. Micro USB Port: For servicing only, not user-accessible.
- 8. AC IN Terminal [ac-in]: Connect the supplied power cord here.
LED Indicator Behavior Descriptions
- Thinking: While a voice command is processing, the four middle Google Assistant LEDs slowly blink from left to right, one at a time.
- Responding: As the Google Assistant responds, all four middle LEDs blink on and off.
- Microphone Mute On: LEDs light orange.
- Hotword Detected ("Ok Google" / "Hey Google"): Four middle LEDs light up in left-to-right order to confirm hotword detection and await your voice command.
- Listening: After hotword detection and the Assistant is awaiting the user query, all four middle Google Assistant LEDs slowly pulse.
- Pairing Started: LED indicators flash in a specific pattern.
- Pairing Finished: All six LEDs blink on and off.
- Pairing Failed: All six LEDs do not blink on and off.
- Volume Level: White LEDs light up to indicate volume level (0 to 50).
Connect & Initial Setup
Power Cord Hookup
Connect the supplied power cord to the AC IN terminal on the unit and then to a power outlet. Always disconnect from the outlet side first when unplugging.
Download the Google Home App
Use the Google Home app to set up and operate the unit. Download it from Google Play or the App Store. The app is compatible with Android™ (version 4.2 or later) and iOS (version 8.0 or later, supporting iPhone®, iPad®, and iPod touch®).
Wi-Fi Network Connection
Your smartphone or tablet must be connected to the same network as this unit for setup and operation. Ensure network connectivity beforehand.
Initial Setup
Perform the following steps when the unit is powered on:
- Start the Google Home app.
- Tap "ACCEPT" for the terms of service and privacy policy to initiate the network connection between the unit and your smartphone. Follow the on-screen instructions to complete the initial settings.
- After initial setup, you can select a tutorial to practice using your Google Assistant.
Note: Your device may download and apply an Over-the-Air (OTA) software update during installation. This is normal and ensures you have the latest features.
Initialize (Factory Reset)
To return the unit's settings to their original factory state, press and hold the microphone mute button for 10 seconds. The LED indicators will flash when initialization starts. This process takes about 20 seconds. The LEDs will turn off when initialization is complete.
Meet Your Google Assistant
You can activate the Google Assistant by saying "Ok Google" or "Hey Google" to the unit. The LED indicators will show the Assistant's status.
Example Voice Commands:
- "Ok Google, Hi, how can I help?"
- "Ok Google, How are you?"
- "Ok Google, Stop"
- "Ok Google, Turn it up"
- "Ok Google, Volume level 6"
- "Ok Google, What can you do?"
- "Ok Google, Play some Music"
- "Ok Google, Play dance music on Youtube"
- "Ok Google, Pause"
- "Ok Google, Next Song"
- "Ok Google, Set a timer 15 minutes"
- "Ok Google, How many teaspoons in a cup?"
- "Ok Google, When's my first event tomorrow?"
- "Ok Google, Wake me up at 6 am tomorrow"
- "Ok Google, Tell me about my day"
- "Ok Google, What's the weather today?"
- "Ok Google, What's the latest news?"
- "Ok Google, How do you say hello in Spanish?"
- "Ok Google, How many calories in an apple?"
- "Ok Google, What sound does a cow make?"
- "Ok Google, What is the nearest pharmacy?"
- "Ok Google, When do they close?"
- "Ok Google, What is their phone number?"
- "Ok Google, Play some music on AV Receiver"
- "Ok Google, Pause the Living Room Speaker"
- "Ok Google, Play sneezing panda video on TV"
- "Ok Google, Set the thermostat 72 degrees"
- "Ok Google, Turn on the living room light"
- "Ok Google, Dim the light in the kitchen"
- "Ok Google, Turn off the bedroom light"
BLUETOOTH® Playback
Pairing
Pairing is required for the first-time connection with BLUETOOTH devices:
- Press and hold the BLUETOOTH button on the unit for 3 seconds. The LED indicators will flash to show pairing has started.
- On your BLUETOOTH device, enable the BLUETOOTH function and select "VC-GX30****" from the list of available devices.
- All six LEDs will blink on and off upon successful pairing. If they do not blink, pairing failed; retry from step 1.
Repeat these steps to connect additional BLUETOOTH devices. The effective range is approximately 10 meters (33 feet), but actual connection quality may vary.
Playing Back
Once paired or connected:
- Initiate playback on the BLUETOOTH wireless technology enabled device. You can also press the BLUETOOTH button on the unit to reconnect the last paired device.
- Play music files and adjust the volume on the BLUETOOTH device to an appropriate level.
Note: Due to BLUETOOTH technology characteristics, audio playback on the unit may have a slight delay compared to the source device.
Specifications
| Category | Details |
|---|---|
| Analog Audio Output | RMS Output Power: 40 W (4 ohm at 1 kHz THD10%), 10 W (8 ohm at 10 kHz THD10%) |
| Network Section | Wireless LAN: IEEE802.11 a/b/g/n/ac standard, 5 GHz/2.4 GHz band EU Channels: 1-13ch, 36-48ch, 52-64ch, 100-140ch JP Channels: 1-14ch, 36-48ch, 52-64ch, 100-140ch US Channels: 1-11ch, 36-48ch, 52-64ch, 100-140ch, 149-165ch |
| Bluetooth Section | Communication System: BLUETOOTH Specification version 4.2 Frequency Band: 2.4 GHz (2.402 GHz - 2.480 GHz) Modulation Method: FHSS (Freq Hopping Spread Spectrum) Compatible Profiles: A2DP v1.3, AVRCP v1.6 Supported Codecs: SBC, AAC Transmission Range (A2DP): 20 Hz - 20 kHz (Sampling frequency 44.1/48 kHz) Maximum Communication Range: Line of sight approx. 10 m* *Actual range may vary due to obstacles, magnetic fields, static electricity, reception sensitivity, antenna performance, operating system, and software. |
| General | Power Supply: AC 100-240 V, 50 / 60 Hz Power Consumption: 26 W Compliance: Complies with European Commission Regulation (EC) No 1275/2008 for networked equipment with high network availability. Power Consumption in Operation Standby*: 2.7 W (*Connected to a wireless network but not providing active audio functions.) |
| Speaker Type | Closed box type |
| Speaker Configuration | Tweeter: 20mm x 1 Soft Dome Woofer: 80mm x 1 Cone |
| Dimensions (W x H x D) | 120 mm x 168 mm x 128 mm (4-5/7" x 6-3/5" x 5") |
| Weight | 1.8 kg (4.0 lbs.) |
| Accessories Included | AC Power cord (1), Quick Start Guide (1), Meet your Google Assistant (model-specific guides) |
License and Trademark
Google, Google Home, Google Play, Chromecast built-in, and related marks are trademarks of Google Inc. The Google Assistant requires an internet connection and is not available in all countries or languages. Feature availability and performance depend on device, network, and may require subscriptions.
Apple, the Apple logo, App Store are trademarks of Apple Inc., registered in the U.S. and other countries.
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.
© 2017 Onkyo & Pioneer Corporation Japan. All rights reserved.
