OMRON Intelli Cuff HEM-FL31 (HEM-FL31-E)

Product Overview

The OMRON Intelli Cuff, model HEM-FL31 (HEM-FL31-E), is a blood pressure monitor cuff designed for use with OMRON blood pressure monitors. It is suitable for arm circumferences between 22 and 42 cm.

Visual Description: The product image shows the Intelli Cuff, which includes a fabric cuff, an attached air tube, and a connector. The OMRON brand logo is visible.

Instructions for Use

Thank you for purchasing the OMRON Intelli Cuff HEM-FL31. This cuff is designed for arm circumferences between 22 and 42 cm. Please refer to the original blood pressure monitor's user manual for full operational details.

Read this manual carefully before using the device. Keep it for future reference. ?

Important Safety Information

⚠️ Attention: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient, or damage to the device or other equipment.

• Use only with OMRON blood pressure monitors approved for this cuff.
• Use the same cuff as indicated on the product side near the air connector. Do not use other types of cuffs.
• Do not wash or wet the cuff.

Cuff Application Procedure

1. Remove any clothing that is too tight on your arm. Do not place the cuff over thick clothing.
2. Firmly insert the inflation connector into the air socket. (Visual: Close-up illustration of the cuff's air connector being firmly inserted into the air hose of a blood pressure monitor.)
3. Position the cuff on the upper arm. The lower edge of the cuff should be placed 1 to 2 cm above the elbow. The air tube should be centered on the inner side of the arm. (Visual: Illustration showing the cuff being placed on an upper arm. A diagram indicates the cuff's lower edge should be 1-2 cm above the elbow, with the air tube positioned centrally on the inner arm.)
4. Properly fasten the fabric band of the cuff. (Visual: Illustration demonstrating how to fasten the fabric band of the cuff securely.)

Right Arm Measurement

When measuring on the right arm, the air tube should be positioned on the side of your elbow. Ensure your arm is not resting on the air tube.

Note: Blood pressure may differ between the right and left arms. OMRON recommends consistently using the same arm for measurement. If measured values differ significantly between arms, consult a physician to determine which arm to use for measurement.

Maintenance

Clean the cuff using a soft, dry cloth, or a soft, damp cloth with mild soap. Do not use benzine, thinner, or other solvents for cleaning.

Do not store the cuff in locations subject to extreme temperatures, humidity, direct sunlight, dust, or corrosive vapors.

Do not bend or excessively twist the air tube.

Specifications

Compliance and Manufacturer Information

This cuff complies with the provisions of the EC Directive 93/42/EEC concerning medical devices, and with the European standard EN1060 on Non-invasive Sphygmomanometers, Part 1: General requirements, and Part 3: Particular requirements for electro-mechanical measuring systems.

This OMRON product conforms to the rigorous quality system requirements of OMRON HEALTHCARE Co., Ltd., JAPAN.

Manufacturer

OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN

EU Representative

OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com

Production Facility

OMRON DALIAN Co., Ltd.
Dalian, CHINA

Subsidiaries and Contacts

OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.

OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH
Gottlieb-Daimler-Strasse 10, 68165 Mannheim, GERMANY
www.omron-healthcare.de

OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE
For the French market only: OMRON After-Sales Service
Toll-free number 0 800 91 43 14
consommateurs@omron-sante.fr
www.omron-healthcare.fr

Made in China