Quest X5 Quick Start Guide

Package Includes

• 1x Gorila Blade9 coil
• 1x Coil cover
• 1x Control box with handle
• 1x Shaft set (4 sections)
• 1x USB-C charging cable
• 1x USB-C to 3.5mm adapter
• 1x Armrest set
• 1x Quick Start Guide

Registration

Register your detector online at QuestMetalDetectors.com by clicking SUPPORT and scrolling to REGISTRATION. If you need assistance, email info@questmetaldetectors.com, and your information will be entered for you.

Installation

1. Install the control box onto the handle.
2. Attach the armrest.
3. Extend the telescopic rods.
4. Connect the search coil to the lower rod.
5. Route the coil cable along the rods.
6. Connect the coil cable to the control box.

Flat Folding

To flat fold the search coil, retract the lower rod to its shortest position and rotate the search coil freely for compact storage.

Quick Start Operation

• Power On/Off: Press the power button once to turn the X5 on. Press and hold to turn it off.
• Sensitivity Adjustment: Use the up/down arrow buttons to increase or decrease sensitivity.
• Detection Mode: Press the menu button to cycle through detection modes.
• Pinpointing: Hold the pinpoint button and sweep over the target to locate it precisely.
• Ground Balance: Hold the ground balance button and pump the coil above the ground to balance the detector to the soil conditions.

For more tips, search "Quest X5 tutorial" on YouTube.

Understanding Your Detector

Discrimination

The X5 allows you to select which metal targets to accept or reject. The screen displays five segments representing Target ID ranges. Black segments indicate rejected targets, while clear segments indicate accepted targets. The GOLD mode offers zero discrimination, suitable for electronic prospecting and archaeological surveys. PARK and FIELD modes come with pre-eliminated segments for common search scenarios.

To adjust discrimination:

1. Momentarily press the POWER touchpad to highlight a segment.
2. Touch the POWER touchpad again to reject (segment disappears) or accept (segment reappears) the highlighted segment.
3. Use the UP or DOWN touchpads to move between segments.
4. Press the PINPOINT touchpad to return to the search screen.

Changes to discrimination settings are saved even after the device is powered off.

Target ID & Indication Segments

The X5 categorizes metal signals into digit values from 1 to 99 based on conductivity. Higher conductivity results in a higher digit. Indication bars visually represent the target's ID range. The detector also indicates target depth, which can be influenced by soil conditions and nearby metal objects.

Tones

The X5 uses high and middle tones to help distinguish between different target IDs, allowing for quick auditory identification.

Programs

• PARK Mode: Stable, medium recovery speed, suitable for coins and jewelry. TID range 40-99.
• FIELD Mode: Sensitive, high recovery speed, targets gold rings and jewelry. TID range 20-99.
• GOLD Mode: High recovery speed, zero discrimination, ideal for gold prospecting. TID range 1-99.

Frequency Shift

To avoid interference from other detectors, you can shift the operational frequency. Press and hold the ground balance button while simultaneously clicking the volume adjustment buttons.

Detecting Techniques

1. Swing: Swing the coil approximately 4cm above the ground, overlapping each pass to ensure no targets are missed.
2. Pinpointing: Use the Xpointer (sold separately) to quickly locate targets. Gently sweep the Xpointer tip over the suspected area.
3. Digging: Use a digger to excavate the soil. Aim for small, precise digging patterns. Remember to fill in any holes after you finish.

Headphones & Recharge

• Audio Output: The X5 has a built-in speaker and supports wired headphones via USB-C or a 3.5mm jack using the included adapter. Set audio volume low before wearing headphones to protect hearing.
• Recharge: Connect the provided USB-C cable to a USB port charger. The battery indicator will stop flashing when fully charged. A full charge takes approximately 4 hours.

Products Care

• General Care: Do not twist the coil cable or connectors. Avoid prolonged exposure to extreme temperatures. Do not use sharp objects on the touchpad. Avoid chemical cleaners, solvents, and insect repellents that may damage plastic components.
• Port Protection: Secure the weather cap tightly to protect the USB port. Even small amounts of sweat or moisture can cause corrosion on electrical contacts when connected to a charger.
• Cleaning: Wipe the device with a cloth dampened with a mild detergent solution, then wipe dry. For stubborn dirt, use a soft, clean, lint-free cloth lightly dampened with water. Ensure the device is off and disconnected from power before cleaning with a damp cloth. Gently wipe the screen.

Troubleshooting

Factory Reset: If issues persist, reset the X5 to factory settings. Turn the detector off, then press and hold the POWER touchpad for 5 seconds while powering on. All screen icons will illuminate, indicating the detector has been reset.

Specifications

• Working frequency: VLF 12kHz
• Display: 3" LCD 60*45mm
• Search Coil: Waterproof Gorila Blade9 (9x5")
• Battery: Built-in 1000mAh Li-Po battery (approx. 30 hours use)
• Recharge method: USB-C port
• Audio output: Built-in speaker or USB-C wired headphones; or 3.5mm wired headphones via adapter
• Protection: Waterproof to 3 meters
• Search Modes: Three (3) - FIELD, GOLD, PARK
• Shaft Adjustment Range: 4 Sections Non-rotational Telescopic rod from 46cm to 130cm (18"~51")
• Target ID range: 1~99
• Unit Weight: 1.1KG
• Ground Balance: Yes
• Backlight: Orange
• Flashlight: Yes
• Armrest: U shape Robust material, No-tool required adjustment design

EU Declaration of Conformity: Dongguan Quest Detection Technology Co., Limited declares that this radio equipment complies with directive 2014/53/EU. Full text available at: www.detectorportal.eu/compliance

Your Voice

Please take a moment to answer the following questions to help Quest develop new products:

1. Why did you decide to buy a Quest detector? (e.g., New technology/Features, Detection performance, Ergonomic/Weight, Recommendation, Style/Design, Promotion)
2. What is your age group? (e.g., 18-25, 26-36, 37-55, 56+)