JBL TUNE720BT Wireless Headphones Quick Start Guide

What's in the Box

The package includes the JBL TUNE720BT headphones and a charging cable.

App

Download the JBL Headphones app for enhanced control and personalization of your listening experience. Available on Google Play and the App Store.

Power On & Connect

Hold the power button for 2 seconds to turn on. To enter pairing mode again, power off and hold the button for 5 seconds. Select "JBL TUNE720BT" on your device's Bluetooth settings to connect.

For Android™ 6.0+: Your JBL TUNE720BT will appear on devices linked with your account. Tap 'Connect'.

For Windows 10 V1803+: A new JBL TUNE720BT device will be found. Click 'Connect'.

Multi-Point Connection

Connect up to 2 devices simultaneously. The JBL TUNE720BT supports multi-point connection.

Controls

Press: Play/Pause, Answer/End Call, Next Track, Previous Track, Activate Voice Assistant (Bixby/Siri®/Others).

Press Twice: Activate Voice Assistant.

Hold (2s): Power On/Off.

Hold (5s): Enter Pairing Mode.

Volume Up/Down: Adjust volume.

Enable advanced controls by connecting your JBL TUNE720BT to the JBL Headphones App.

Wired Listening Mode

Connect the audio cable to enjoy wired listening.

Do More with the App

The JBL Headphones app allows for software updates, equalizer adjustments, and voice prompt settings.

Charging

Connect the USB charging cable to charge your headphones. A full charge takes approximately 2 hours. A 5-minute charge provides 3 hours of music playtime.

Factory Reset

To perform a factory reset, power off the headphones and then hold the power button for 5 seconds.

LED Behaviors

Technical Specifications

SpecificationValue
ModelTUNE720BT
Driver Size40 mm/1.57" Dynamic Driver
Power Supply5V-1A
Weight220 g/0.485 lbs
Battery TypeLithium-ion Battery (500 mAh/3.7V)
Charging Time2 hrs from empty
Music Playtime with BT onUp to 76 hrs
Talk TimeUp to 45 hrs
Frequency Response20 Hz - 20 kHz
Impedance32 ohm
Sensitivity101 dB SPL@1 kHz
Maximum SPL95 dB
Microphone Sensitivity-40 dBV/Pa@1 kHz
Bluetooth Version5.3
Bluetooth Profile VersionA2DP v1.3.2, AVRCP v1.6.2, HFP v1.7.2
Bluetooth Transmitter Frequency Range2.400 GHz - 2.4835 GHz
Bluetooth Transmitter Power≤ 10 dBm (EIRP)
Bluetooth Transmitter ModulationGFSK, π/4-DQPSK, 8-DPSK
Maximum Operation Temperature45 °C

Battery Lifespan: To prolong battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.

Manufacturer: Harman International Industries, Incorporated, USA.

Country of Origin: Made in China.

Importer (Russia): OOO “HARMAN RUS CIS“, Russia, 127018, Moscow, Dvintsev St., Bldg. 12, p. 1.

Warranty Period: 1 year.

Service Life: 2 years.

Service Center Information: www.harman.com/ru

Technical Support: 8 (800) 700 0467.

Organization Authorized for Consumer Claims: OOO “HARMAN RUS CIS“.

Product Certified.

Date of Manufacture: Determined by the two letters in the second group of serial number characters following the '-' separator. 'M' indicates the month (A=Jan, B=Feb, etc.) and 'Y' indicates the year (A=2010, B=2011, etc.).

Battery Safety Information: DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

IC RF Exposure Information and Statement: The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC:6132A-TUNE720BT) has also been tested against this SAR limit. According to this standard, the highest SAR value reported during product certification for head use is 0.017 W/Kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0 mm between the user’s head and the back of the headset. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided. Head operation: The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

FCC ID: APITUNE720BT

IC: 6132A-TUNE720BT

Product specifications and app screens are subject to change without notice.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This product is homologated by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements. For more information, consult the Anatel website – www.anatel.gov.br. This equipment does not have the right to protection against harmful interference and cannot cause interference in duly authorized systems. Attention: according to Brazilian law no. 11.291, prolonged exposure to noise levels above 85dB can cause damage to the auditory system.

Models: Tune 720BT Wireless Over-Ear ANC Headphones, Tune 720BT, Wireless Over-Ear ANC Headphones, Over-Ear ANC Headphones, ANC Headphones, Headphones

File Info : application/pdf, 2 Pages, 3.48MB

PDF preview unavailable. Download the PDF instead.

jbl-tune-720bt-wit

References

Adobe PDF Library 15.0 Adobe InDesign 15.1 (Windows)

Related Documents

Preview JBL Junior 320BT Bluetooth Headphones Quick Start Guide
A comprehensive quick start guide for JBL Junior 320BT wireless on-ear headphones, covering setup, controls, app features, charging, troubleshooting, and technical specifications.
Preview JBL JR310BT Kids Wireless On-Ear Headphones Quick Start Guide
A quick start guide for the JBL JR310BT Kids Wireless On-Ear Headphones, covering what's in the box, power on and connect, manual pairing, button commands, charging, LED behaviors, and technical specifications.
Preview JBL TUNE720BT Wireless Headphones Quick Start Guide
This guide provides instructions for setting up, connecting, and using your JBL TUNE720BT wireless headphones, including app integration, controls, charging, and technical specifications.
Preview JBL TUNE520BT Wireless On-Ear Headphones Quick Start Guide
A comprehensive guide to setting up, connecting, and using the JBL TUNE520BT wireless on-ear headphones, including controls, app features, charging, and technical specifications.
Preview JBL Junior 320BT Quick Start Guide
This guide provides essential information for setting up and using your JBL Junior 320BT wireless headphones, including unboxing, pairing, controls, app features, charging, and technical specifications.
Preview JBL Tune 520BT Quick Start Guide: Setup, Controls, and Specifications
Get started with your JBL Tune 520BT wireless headphones. This guide covers setup, Bluetooth pairing, controls, app features, charging, and technical specifications.
Preview JBL TUNE710BT Quick Start Guide
A quick start guide for the JBL TUNE710BT wireless over-ear headphones, covering what's in the box, powering on, connecting via Bluetooth, multi-point connection, button commands, wired listening mode, charging, factory reset, LED behaviors, and technical specifications.
Preview JBL TUNE 680NC Quick Start Guide
Get started with your JBL TUNE 680NC wireless headphones. This guide covers unboxing, setup, controls, features, and technical specifications.