JBL TUNE520BT Wireless On-Ear Headphones
Quick Start Guide
What's in the Box
Your JBL TUNE520BT package includes:
- JBL TUNE520BT Headphones
- USB-C Charging Cable
- User Manual / Quick Start Guide
APP
Download the JBL Headphones app for enhanced control and personalization of your listening experience. Available on Google Play and the App Store.
Note: The app is for China only in some regions.
Power On & Connect
To Power On: Hold the power button for 2 seconds.
To Connect (Pairing Mode):
- Turn off the headphones.
- Hold the power button for 5 seconds to enter pairing mode again.
- On your device, go to Bluetooth settings and select "JBL TUNE520BT" to connect.
Multi-Point Connection: Connect to a maximum of 2 devices simultaneously.
Controls
Press Once: Play/Pause music, Answer/End calls.
Press Twice: Next track.
Press Three Times: Previous track.
Hold (2s): Activate Bixby/Siri/Other voice assistants.
Note: Enable advanced controls by connecting your JBL TUNE520BT to the JBL Headphones app.
Do More with the App
The JBL Headphones app allows for:
- VoiceAware settings
- Smart Audio & Video mode
- Equalizer adjustments (Jazz, Vocal, Bass, etc.)
- Auto Power Off settings
- Software Updates
- Voice Prompts language selection
Charging
- Connect the USB-C cable to charge.
- Charging takes approximately 2 hours for a full charge.
- A 5-minute charge provides up to 3 hours of playtime.
Factory Reset
To perform a factory reset, power off the headphones and then hold the power button for 5 seconds.
LED Behaviors
- Power On: White LED
- Low Battery: Red LED
- Charging: Pulsing Red LED
- Fully Charged: Solid Blue LED
- BT Connecting: Blue LED flashing
- BT Connected: Solid Blue LED
- BT Not Connected: Blue LED flashing
Technical Specifications
Specification | Value |
---|---|
Model | TUNE520BT |
Driver Size | 33 mm / 1.3" Dynamic Driver |
Microphone Sensitivity | -40 dBV/Pa@1 kHz |
Power Supply | 5V - 1A |
Weight | 157 g / 0.35 lbs |
Bluetooth Version | 5.3 |
Bluetooth Profile Version | HFP 1.7.2, AVRCP 1.6.2, A2DP 1.3.2 |
Battery Type | Lithium-ion polymer (450 mAh/3.7V) |
Charging Time | 2 hrs from empty |
Music Playtime (BT on) | Up to 57 hrs |
Talk Time | Up to 35 hrs |
Frequency Response | 20 Hz - 20 kHz |
Impedance | 30 ohm |
Sensitivity | 102 dB SPL@1 kHz |
Maximum SPL | 95 dB |
Bluetooth Transmitter Frequency Range | 2.4 GHz - 2.4835 GHz |
Bluetooth Transmitter Power | ≤ 6 dBm (E.I.R.P) |
Bluetooth Transmitter Modulation | GFSK, π/4-DQPSK, 8DPSK |
Maximum Operation Temperature | 45 °C |
Important Safety Information
Battery Lifespan: To prolong battery life, fully charge at least once every 3 months. Battery life varies by use and settings.
RF Exposure Information:
- Canada SAR limit: 1.6 W/kg averaged over one gram of tissue. Highest SAR value for head use is 0.023 W/Kg. Use accessories that maintain 0mm separation from the head.
- For head operation, maintain a minimum separation distance of 0 cm between the user's ear and the product. Use only supplied or approved antennas.
Disposal: Do not attempt to open, service, or disassemble the battery. Do not short circuit. May explode if disposed of in fire. Risk of explosion if battery is replaced by an incorrect type. Dispose or recycle used batteries according to instructions.
Compliance: This product complies with relevant regulations. For more information, visit the Anatel website (www.anatel.gov.br) in Brazil. This equipment does not cause harmful interference and must accept any interference received.
Hearing Safety: Prolonged exposure to noise levels above 85dB can cause hearing damage.